Reloading Supplies ▶ Powder & Primers ▶ Primers ▶ Small Rifle ▶ Small Rifle ▶

Remington Small Rifle Bench Rest Primers #7-1/2

Product Family #: 1601120656

Loading image...

Enlarge Zoom in

Select: Size, Quantity

Status:

Out of Stock, No Backorder

Date expected in stock: 06/05/2013

Quantity Limit of no limit

Email this Page to a Friend

$38.99 - $163.99

Quantity:

Notify Me

Please Sign In to use this feature.

Substitute Products

Others Bought

Attention!

Primer orders ship separately and may arrive at a later date. $27.50 Haz Mat fee added per order. Primers ship ground freight to the 1st 48 states. 70 lb max per order. Primers cannot be returned. Check local regulations.

Product Information

Being a leader in both the firearms and ammunition industry Remington knows how important it is to have the highest quality ammunition available to make your firearm perform to its fullest potential. This starts with using the best components possible to manufacture ammunition. These are the same primers Remington uses in the production of their own ammunition and performs to their highest standards. If you want the best possible out of your firearm you have to start with the best that’s why reloaders choose Remington components for their loads.

Within every Remington primer is a group of subcomponents assembled to exceptionally tight tolerances. Primer cup dimensions are controlled to .0001", and the priming mix is specially formulated for consistent ignition with a wide variety of powder types. Primers are tested for reliability from -20 degrees F to +150 degrees F. The unique tripod anvil design creates a larger strike area with maximum sensitivity, even with off center firing pin strikes.

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

4.7

(based on 12 reviews)

Most Helpful Positive Review

For some reason this ...

For some reason this primer works best with H335. Since this was the case I picked up a lot of 5,000. It may be a good idea to stock up on this stuff. '...Read complete review

For some reason this primer works best with H335. Since this was the case I picked up a lot of 5,000. It may be a good idea to stock up on this stuff. 'Camp Perry' is coming up soon. Thats when it get to be nearly impossible to find components.

Most Helpful Negative Review

Seemed good but about ...

Seemed good but about every 10th shot through my ar-15 bushmaster was a dud. I was using imr4895 with BHA match casings, and yes I cut the rim out of the casing with ...Read complete review

Seemed good but about every 10th shot through my ar-15 bushmaster was a dud. I was using imr4895 with BHA match casings, and yes I cut the rim out of the casing with a swaging die.

Reviewed by 12 customers

Sort by

Displaying reviews 1-10

Previous | Next »

11/3/2012

5.0

Love these primers

By Smokescreen

from The woods of Wis.

About Me Enthusiast, Home Owner, Hunter, Law Enforcement, Prepper

Pros

Cons

Best Uses

Comments about Remington Small Rifle Bench Rest Primers #7-1/2 Box of 1000 (10 Trays of 100):

I loaded 35,000 223s with 4064 powder one winter and never had a missfire. both semi and full auto.this is the only small rifle primer I will ever use.

1/10/2012

(1 of 1 customers found this review helpful)

5.0

I have used these primers ...

By RemMax

from Veedersburg, IN

I have used these primers in my Thompson Contender for several years with excellent results, I get .01" 3 shot groups, at 100 yards from my 14" Contender all day any day (3 rounds through 1 ragged hole). I load Rem Cases, Sierra 170gr JHC and 21.8gr's of H110 and have never blown or peirced a primer due to the thincker cup. Highly recomend these for any high pressure load

7/31/2010

(1 of 1 customers found this review helpful)

5.0

Great primers. I use them ...

By Stanley

from Jacksonville, OR

Great primers. I use them for service rifle matches and have reloaded about 7,000 rounds with zero misfires. Not too hard and not to soft. Never had a slam fire with these primers. IMO a great value and a great small rifle primer.

7/12/2010

(1 of 3 customers found this review helpful)

4.0

All: Per Remington phone ...

By N

from Raleigh, NC

All: Per Remington phone call these are not necessarily "bench rest" grade primers. That term "bench rest" was used in the name for all their small rifle primers since most bench rest rifles use cartridges with small rifle primers i.e.,: .223, 6ppc, etc. I think it is misleading marketing, so I give them 4 out of 5.

4/19/2010

(1 of 1 customers found this review helpful)

5.0

I have a stock Weatherby ...

By Shaun

from Billings, MT

I have a stock Weatherby Vanguard. 40 grain Nosler, AA 2230, pre-shot and neck sized Hornady brass and a Remington BR primer. I'm getting a .26 group at 100 yards. I'm getting about 3600FPS. I switched to a regular CCI small rifle primer and couldn't shoot under an inch even with adjustments. I've gone through about 500 primers and not had a dud one. I've had a couple hiss-pops with the CCI primers. Better quality product.

2/25/2010

(2 of 6 customers found this review helpful)

2.0

Seemed good but about ...

By Ben

from Medford, OR

Seemed good but about every 10th shot through my ar-15 bushmaster was a dud. I was using imr4895 with BHA match casings, and yes I cut the rim out of the casing with a swaging die.

2/25/2010

(10 of 19 customers found this review helpful)

5.0

The Remington 7-1/2 BR ...

By johnny

from mustang, ok

The Remington 7-1/2 BR primers are the best I have found. Always on target.

2/25/2010

(21 of 23 customers found this review helpful)

5.0

For some reason this ...

By Juan

from Hogansville, GA

2/25/2010

(15 of 18 customers found this review helpful)

5.0

They work as good as ...

By earl

from reading, pa

They work as good as Federal 205m.

2/25/2010

(4 of 4 customers found this review helpful)

5.0

I have shot over three ...

By Alfonso

from Palm Bay, FL

I have shot over three thousand rounds of 223 in two CMP Bushamster AR15s (1 in 8 twist) and have never had a failure. These primers have excellent reliability and my loads with light or heavy match bullets always get subminute of angle accuracy. These are meant for Bench Rest competition but they are great for high power because of their reliability and accuracy enhancement of hand loads. I have shot other brands but these have given me the best results overall and without misfires. They are consistent and believe or not, less expensive than other bench rest brands.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Remington Small Rifle Bench Rest Primers #7-1/2

Substitute Products

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products