Gunsmithing & Gun Parts ▶ Gun Parts by Gun Make & Model ▶ AK-47, AK-74 ▶ Magazines and Parts ▶

TAPCO Intrafuse Magazine AK-47 7.62x39mm Russian 10-Round Polymer

Product Family #: 1116678273

Loading image...

Enlarge Zoom in

Select: Color

Status:

Out of Stock, No Backorder

Date expected in stock: 06/08/2013

Quantity Limit of no limit

Email this Page to a Friend

$10.99

Quantity:

Notify Me

Please Sign In to use this feature.

Others Bought

Product Information

TAPCO's AK-47 and AK-74 magazines are the next generation in AK magazine technology. Constructed of reinforced polymer this magazine is sure to offer years of service. The aggressive horizontal ridges provide increased gripping surface for insertion and extraction of the magazine in wet or muddy conditions. When inserted into a rifle, this magazine counts as 3 US Section 922r compliance parts (magazine body, floorplate, follower). Covered by a lifetime guarantee.

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

3.8

(based on 14 reviews)

Most Helpful Positive Review

Fits my Century Arms ...

Fits my Century Arms Polish Model 1960 AK47 perfectly, absolutely no mag wobble. Put a few hundred rounds through 2 mags with no malfunctions (yes, lots of reloading mags in 10-round NY). Solidly built. I have not tried the Arsenal 10-round mag, and I don't think I will since the Tapco works perfectly, and has a more agreeable cost.

Most Helpful Negative Review

I got one of these for my ...

I got one of these for my WASR 10. After only 1 range trip and maybe 6 or 7 mag uses the plastic of the contact points were chewed almost to the point of uselessness...Read complete review

I got one of these for my WASR 10. After only 1 range trip and maybe 6 or 7 mag uses the plastic of the contact points were chewed almost to the point of uselessness. This magazine now barely locks in place, with a slap or two, and I don't trust it enough to use it. The mag body is all plastic, and the mag contact points are NOT reinforced by steel like other polymer mags I have seen. I will not buy another tapco magazine.

Reviewed by 14 customers

Sort by

Displaying reviews 1-10

Previous | Next »

4/26/2012

2.0

Bought these for my ...

By Victor

from Sacramento, CA

Bought these for my PTR32. They failed to feed about 1 out of every 10 rounds. Will probably have to end up replacing the weak spring. Contruction is pretty solid, thats why i gave them 2 stars.

4/16/2012

5.0

If you have a WASR 10/63 ...

By Brandon

from Pittsgrove, NJ

If you have a WASR 10/63 then you WILL have to remove some of the material from the back side of the mag. It is worth buying these and slowly using a dremel type tool to get the fit you want, because once you have them fitted they are the best at the best price. NJ has a 15 round limit and I wish I could buy these in 15 rounds instead of 10. I have dropped them in mud and they still worked. (gotta knock the mud out first but...) Since they only hold 10 rounds, buy lots more mags.

2/10/2012

(1 of 1 customers found this review helpful)

5.0

I got this magazine for ...

By Stephen

from Wilkes Barre, PA

I got this magazine for my AK so I can do some testing from a bench. The 30-round magazines were causing problems because they were too long for my rest. This magazine fit and functions great. I really don't have a need for small magazines like this, but if I did I would buy more.

1/26/2012

(1 of 1 customers found this review helpful)

1.0

I got one of these for my ...

By Marc

from Huntington Beach, CA

10/12/2011

(1 of 1 customers found this review helpful)

4.0

I also have a wasr ,and ...

By Charlie

from Lodi , WI

I also have a wasr ,and this mag did not fit! But dont give up just yet . I took a flat file to both the rifle and "gently" the plastic on this mag. .Look for the scratch marks as you fit this and file there. now snug and quite!! fits great ,,just needs a little work,,,,heck it was fun!! USMC

9/2/2011

5.0

One of the other ...

By carlo

from Westtown, NY

One of the other reviewers said it would not fit his SL-107CR. I used 3 of these in a SL-95 with similar, BUT WORKABLE, issues and the mags cycle flawlessly. I was able to make these work in my milled reciever by simply using some 150 grain and 320 sand paper on the 'nub' of the mag that is supposed to catch the mag release on the AK, simply sand down the face of the nub that is pointing to the bottom of the magazine slowly. Only a few mills really needs to come off and plenty 'nub' was left that I was confortable it will not break with use. I also lightly sanded the sides of the mag where the reciever was rubbing and they fit perfectly now. Use only 320 grit for the sides of the mag then 'scratch' the surface with your nails to blend the finish. Looks fine also. My guess is that the TAPCO mags work great on the stamped reciever AKs to take up any 'wobble' from normal mags due to tolerance issues......its the price I keep paying for buying a quality AK I guess :)

6/28/2011

(1 of 1 customers found this review helpful)

4.0

As everyone else said, ...

By ADAM

from AMELIA COURT HOUSE, VA

As everyone else said, these required a bit more modification than the 30 round TAPCO AK mags to fit in my WASR. These are great to use if shooting from a rest/bench while sighting in.

5/12/2011

(2 of 2 customers found this review helpful)

5.0

Fits my Century Arms ...

By Marc

from Poughkeepsie, NY

3/19/2011

5.0

Great mag, fits tight, ...

By David

from Norton, OH

Great mag, fits tight, feeds perfectly. Couldn't be more satisfied with it.

3/15/2011

5.0

I was very surprised with ...

By Zachery

from Sigourney, IA

I was very surprised with how solid this mag was. The movement of the follower was smooth and stable. This mag fit almost perfectly in my Arsenal AK (it was a little snug at the release but seemed to form fit itself after inserting and removing it two or three times) seats firmly in the mag well on a machined receiver. No feeding troubles. Planning to get a few 20rd mags and try them out. Overall a good magazine.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

TAPCO Intrafuse Magazine AK-47 7.62x39mm Russian 10-Round Polymer

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products