Gunsmithing & Gun Parts ▶ Gun Parts by Gun Make & Model ▶ 1911 ▶ 1911 Commander,Government ▶ Magazine Wells ▶

Wilson Combat Custom Magazine Well 1911 Stainless Steel

Product #: 138050 Wilson Combat #: 188S UPC #: 874218000400

Loading image...

Enlarge Zoom in

$31.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Swenson Custom Magazine Well 1911 Stainless Steel... $21.99 Available

Others Bought

Product Information

Provides a large beveled opening for super-fast magazine changes without adding unnecessary bulk to your handgun. Manufactured from solid steel to provide a durable and attractive addition to your 1911. Attaches to the grip screw bushings and is held in place by the grip panels. No frame modification is required, but slight modification to the grip panel may be necessary unless relieved grips are used.

Technical Information

Material: Stainless steel

Finish: Silver

Gunsmithing Required: Slight modification to grip panel required

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Wilson Combat Custom Magazine Well 1911 Stainless Steel

4.7

(based on 24 reviews)

Most Helpful Positive Review

Perfect fit on my ...

Perfect fit on my Springfield Armory Loaded Operator PX9105L. I didn't use relieved grips, so there's a very, very, slight bulge where the base attaches to the grip screws. Didn't affect width to me at all. Also, if your magazines don't have a rubber base, you will need it, as the increased depth will make it hard to completely seat a loaded magazine, or pull it out it needed. Overall, great product, and really makes it much easier to load in the dark/low light, or for a quick reload while inserting into the magazine base.

Most Helpful Negative Review

Bought this well to go on ...

Bought this well to go on a Stainless S&W 1911. The tabs are too narrow to fit over the grip screws and fit tightly to the bottom of the pistol. It fit gr...Read complete review

Bought this well to go on a Stainless S&W 1911. The tabs are too narrow to fit over the grip screws and fit tightly to the bottom of the pistol. It fit great on my Springer which is blued. Mags fit fine on the springer but on the S&W I had to modify the well angles so mags with extended base plates would work. Regular base mags would snap in just fine. It is a quality item, just does not drop in on my SW1911.

Reviewed by 24 customers

Sort by

Displaying reviews 1-10

Previous | Next »

5/16/2012

5.0

Great low cost ...

By Jacob

from Arlington, TX

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

Great low cost alternative to other higher priced mag wells. Required slight filing to the inside of the grip hooks to fit my SW1911 (108282). The outer ring has a nice polish while the bottom feed surface has a medium coarse matte finish.

2/21/2012

4.0

Good product for my S&W ...

By Steve

from Durham, NC

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

Good product for my S&W 1911 used in USPSA, but mag pads are a must or they cannot be fully inserted. Also, the pad on factory mags is too wide to fit.

1/9/2012

(1 of 1 customers found this review helpful)

5.0

This is THE best magwell! ...

By Glendon

from Charlotte, NC

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

This is THE best magwell! Smaller & light than those attached to the backstrap, yet equally functional. Fumble-free mag changes become automatic. No modification required on my Taurus PT 1911. Remove the grip screw bushings & well slides right on with a snug flush fit.

12/11/2011

5.0

This is a quality item. I ...

By Pete

from Colorado Springs, CO

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

This is a quality item. I purchased this for a Sig Sauer 1911 C 3. The pistol has a two tone finish, and the stainless mag well contrasts well with the dark frame. (Especially if you polish it with a small amount of metal polish.) The installation does require a bit of relief carving on the back of the grip panels, but don't let this discourage you. A small effort, and a little time provides an excellent fit. For the price of the item, and a little time....this really enhances the performance and look of your 1911.

10/29/2011

5.0

Excellent fit on my ...

By Jerry

from Tucson, AZ

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

Excellent fit on my Kimber Custom II. Will need to remove it when I occasionally have to pull the mainspring housing, but not a big deal since it simply hangs on the lower grip screws.

9/6/2011

5.0

Very nice part. Fit my ...

By Robert

from Lake Placid, FL

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

Very nice part. Fit my Springfield perfectly. Used with Pachymere wood/rubber grip panels with wrap around finger grooves and had no interference problem. It will NOT work with CMC 10 round mags that have extended pads. Work fine with CMC 8 round mags with bump pads. Also, function is great! Not just looks....

7/13/2011

5.0

I just installed this on ...

By Michael

from Plainwell, MI

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

I just installed this on my Colt Combat Elite .38 Super. It fit as if custom made. The stock neoprene grips did not need modification though they do bulge a little where the hooks fit underneath. Magazines load very smooth and the finish matches my stainless frame. I was skeptical prior to purchase but turned out to be very happy.

3/10/2011

5.0

Awesome. I put this on a ...

By W

from Phoenix, AZ

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

Awesome. I put this on a two-tone, Sig XO, fit like a Glock, completely flush, mag changes are way easier. Everyone is correct about it bulging the grip. However, I have a Pearce rubber grip product# 799381 on mine. So I just cut out the wings on the rubber, took 20 seconds, and works perfectly. I was hesitant to buy this one due to the price but I couldn't be happier. Looks very nice on the two tone as well.

1/12/2011

(1 of 1 customers found this review helpful)

5.0

I bought this for my ...

By Scott

from Krum, TX

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

I bought this for my Taurus 1911 and had no problem getting this to fit, although I did have to use a file to remove a little material inside of my grips, to make room for the tabs of the mag well extender. Took about 20 min. start to finish. Looks great and was shipped really fast, thanks Midway.

9/22/2010

5.0

When I first opened it ...

By Samuel

from Yuma, AZ

Comments about Wilson Combat Custom Magazine Well 1911 Stainless Steel:

When I first opened it up, I thought it was a little small. Then I installed it (have a rubber mallet ready lol). The fit is very snug (which is the way it should be) and fit is perfect. First mag I tried slid in effortlessly. Oh, I'm going to love this. I was truly amazed how great this magwell works. This is the best bang for the buck product I've bought for my 1911-A1.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Wilson Combat Custom Magazine Well 1911 Stainless Steel

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products