TMA Marlin Cowboy Competition Dry-Fire Device Steel Blue

Product #: 140555 TMA #: MDF001
$29.49
Status:
Date expected in stock if ordered today: 10/24/2013

Please Sign In to use this feature.

Product Information

This replaces the crossbolt safety on Marlin lever rifles. No installation instructions are provided with this product. Instructions for installation are available by clicking the technical specifications link directly below.

Technical Information


S.A.S.S. Approved
From the manufacturer:
COWBOY COMPETITION DRY-FIRE SAFETY for MARLIN "S" MODEL RIFLES

INSTRUCTIONS

INSTALLATION:
  • Clear the firearm, making sure that the chamber is empty, the hammer is in the full cock position, and the bolt is closed.
  • Remove the tang screw and the butt stock..
  • A .075" hex key is required to remove the set screw at the left rear of the receiver. Remove the set screw, spring, and detent ball; removing these parts over a terry cloth towel or bowl is recommended to avoid losing these small parts. Remove the safety button by withdrawing it from the right side of the receiver.
  • Insert the Cowboy Competition Dry-fire Safety Device into the hole in the receiver from which the safety button was removed. Insert the Cowboy Competition Dry-fire Safety Device so that the screw slot is facing out the right side of the receiver and the detent groove is facing the rear of the receiver.
  • Reinstall the detent ball, spring, and set screw into the rear of the receiver. A dab of wheel bearing grease on the detent ball and spring will help prevent loss. Tighten the set screw so that it is flush with the rear of the receiver. Do not overtighten the set screw because overtightening will prevent normal rotation of the Cowboy Competition Dry-fire Safety Device.
  • Rotate the Cowboy Competition Dry-fire Safety Device to ensure that it rotates between rotational limits.
  • Reinstall the butt stock and tang screw.

    USE:
  • Rotate the Cowboy Competition Dry-fire Safety Device to the right (clockwise) to the "safe" position.
  • Manually lower the hammer onto the hammer block to verify that the Cowboy Competition Dry-fire Safety Device is actuated and preventing the hammer from impacting the firing pin.
  • Return the hammer to the full cock position and dry-fire the firearm. The action can be cycled to reset the hammer to the full cock position for repetitive dry-firing.

    WARNING: THE TMA COWBOY COMPETITION DRY-FIRE SAFETY DEVICE IS FOR USE ONLY IN SASS SANCTIONED COWBOY ACTION SHOOTING COMPETITION, AND USE IN HUNTING FIREARMS IS SPECIFICALLY PROHIBITED.
    • Was this information helpful? Yes No

    This Information was not helpful because:

    Know someone who may like this? Email this Page to a Friend

    Customer Reviews

    The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    Navigation
    Recently Added
    Suggested Products