Optics ▶ Rings - Scopes ▶ 30mm Rings ▶ Picatinny ▶

Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2

Product #: 156357 Burris #: 420164 UPC #: 000381201645

Loading image...

Enlarge Zoom in

$64.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Leupold 30mm Mark 4 Picatinny-Style Rings Matte High... $149.99 Available
Warne 30mm Tactical Picatinny-Style Rings Matte High... $119.99 Out of Stock, Backorder OK
Valdada IOR 30mm Tactical Heavy Duty Picatinny-Style Rings... $105.00 Available

Others Bought

Product Information

One look and you know Xtreme Tactical Rings are all about point-of-aim security and durability. The super-strong yet surprisingly lightweight, six-screw aluminum rings anchor scopes in place on any Picatinny rail or Weaver-style base to deliver unfailing return-to-zero. Available in 1" and 30mm sizes, a choice of four ring heights accommodates the installation of any sight from red-dots to large objective target scopes. The 1" height is perfect for all scopes on AR15/M16 flattop receivers, providing proper cheek weld. Designed and built for the rigors of tactical shooting and massive recoil, Xtreme Tactical Rings are not out of place on varmint rifles or big game rifles that may be exposed to the abuses of hard hunting and magnum recoils.

Technical Information

Material: Aluminum

Style: Picatinny

Ring Diameter: 30mm

Ring Height: 3/4" (measured from base of ring to bottom of scope tube)

Notes:

6 screw ring, 3 per side

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2

4.6

(based on 11 reviews)

Most Helpful Positive Review

These are nice rings for ...

These are nice rings for the money. Very solid and needed very little buffing to get a good fit up with the scope. They are made wide so they have a large amount of ...Read complete review

These are nice rings for the money. Very solid and needed very little buffing to get a good fit up with the scope. They are made wide so they have a large amount of surface contact with the scope adding to the rigidity. My only improvement would be for them to be made in steel versus aluminum which would enhance their strength that much more. Nice rings!

Most Helpful Negative Review

I had two problems with ...

I had two problems with my rings that drop my rating to three stars. First, the screw holes in the top half of the rings were too small; when I attempted to tighten the...Read complete review

I had two problems with my rings that drop my rating to three stars. First, the screw holes in the top half of the rings were too small; when I attempted to tighten the screws down delicately, the screw threads were catching on the lip of the hole, causing the top half to be squeezed down prematurely. I fixed this by reaming the holes ever so slightly by hand with a drill bit. The second problem was that the rings did not line up in the yaw and pitch axes, according to my Wheeler alignment kit. Fortunately I was able to lap the rings into acceptable alignment, but I had to lap about 90% of the surface area of the inside of the rings. With those two issues addressed the rings now seem to work very well.

Reviewed by 11 customers

Sort by

Displaying reviews 1-10

Previous | Next »

8/6/2012

5.0

Good rings. Really good ...

By Suwannee Tim

from North, FL

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

Good rings. Really good rings for the money. Recently I bashed Burris for putting lock rings under the nuts. Lock rings have no place on scope rings. Lock rings gone! Yay!

5/9/2012

(3 of 3 customers found this review helpful)

5.0

First off, one of the ...

By Skyhook

from PIPERSVILLE, PA

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

First off, one of the biggest questions is "will my scope fit with these rings? Or should I get the extra high ones?". The gun that these rings went on was a flat top (including the free float tube) Ar-10. So I needed to make sure that the objective end would clear. The scope in question was a Sightron 8-32x56mm. I know every scope is slightly different but after mounting I had about 1/8th of an inch of clearance at the bottom of the objective bell. From the bottom of the ring hole to the picatinny rail on the gun was .7in or 17.5mm. So with that info you should be able to measure your scope and figure out if it will fit. As far as the rings go, I have to agree with another reviewer, in the fact that these rings are of great quality for a far cheaper price. I would personally preferred 8 bolts per ring but on a 308cal 6 bolt should suffice. Make sure when you mount them the nut to tighten them to the rail faces to the left of the gun. The cross bolt in the middle of the clamp portion is tapered for extra strength under recoil. All in all I would highly recommend this product to anyone. Skyhook-

2/25/2010

(16 of 23 customers found this review helpful)

3.0

I had two problems with ...

By J

from Cornwall, VT

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

2/25/2010

(14 of 16 customers found this review helpful)

5.0

These are some rock-solid ...

By Dennis

from Lansing, MI

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

These are some rock-solid rings. After buying these I can't for the life of me figure out why people pay up to three times more for their competitor's rings that are no improvement over Burris's.

2/25/2010

(1 of 1 customers found this review helpful)

5.0

I have one of these rings ...

By Ben

from Tampa, FL

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

I have one of these rings mounting a Burris XTS-135 to a CX4 and another mounting an Aimpoint ML3 to an FN PS90 SBR and they are rock solid despite heavy use and high round count. You couldn't ask for a tougher mounting.If you're looking for the best non-QD mount...you've found it here.

2/25/2010

(1 of 1 customers found this review helpful)

4.0

These are enormous, ...

By Alan

from Lansing, MI

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

These are enormous, massive rings, so big they are bordering on laughable. But they are well made and very, very solid. A good choice on a massive recoiling gun, overkill on most hunting and target rifles. They are also long enough (front to back) to start causing interference problems with shorter scopes, such as an Aimpoint 9000.

2/25/2010

(7 of 10 customers found this review helpful)

5.0

Work well, and look ...

By Brent

from Spokane, WA

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

Work well, and look excellent. A definite "Best Buy" for even twice the price. Mounted on an AR-30 338Lapua, hit 1K gong on 2nd shot. A very solid product.

2/25/2010

(8 of 12 customers found this review helpful)

5.0

The rings are true to ...

By Paul

from Houston, Tx

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

The rings are true to Burris quality. I will order another set for my next rifle project.

2/25/2010

(13 of 17 customers found this review helpful)

5.0

Very heavy duty rings. ...

By Daniel

from Salisbury, NC

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

Very heavy duty rings. Very little lapping needed to get a fine seat on your scope....

2/25/2010

(3 of 4 customers found this review helpful)

5.0

Great rings. I use the ...

By Jeff

from Dallas, TX

Comments about Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2:

Great rings. I use the Xtreme rings on a few rifles. This particular model (high), is mounted with a Nightforce NXS on top of a .50bmg. Tighten them down with a 3/8" socket, and they're good to go... no movement at all.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Burris 30mm Xtreme Tactical Picatinny-Style Rings Matte High Package of 2

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products