Reloading Supplies ▶ Presses - Reloading ▶ Reloading Press Parts & Accessories ▶ Hornady Press Parts ▶

Hornady Powder Cop Die

Product #: 199393 Hornady #: 050063 UPC #: 090255500639

Loading image...

Enlarge Zoom in

$34.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

RCBS Powder Checker Die... $29.99 Out of Stock, Backorder OK

Others Bought

Hornady Lock-N-Load Die Bushings... $9.99 - $40.99 Out of Stock, Backorder OK Select Options
Hornady Lock-N-Load AP Progressive Press Shellplate #16 (17... $32.99 Available
Hornady Lock-N-Load AP Progressive Press Shellplate #45 (45... $37.99 Available
Hornady One Shot Gun Cleaner-Degreaser and Dry Lubricant 5-1/2... $7.59 Available
Hornady Lock-N-Load AP Progressive Press Case Retainer Spring... $1.77 - $7.49 Available Select Options
Hornady Lock-N-Load AP Progressive Press Shellplate #8 (30... $32.99 Available
Hornady Lock-N-Load AP Progressive Press Shellplate #6 (38... $32.99 Available
Hornady One Shot Case Lube... $9.99 - $30.99 Out of Stock, Backorder OK Select Options
Hornady Lock-N-Load AP Progressive Press Shellplate #10 (357... $32.99 Available
Hornady Lock-N-Load Bench Scale Electronic Powder Scale... $78.99 Available
Hornady Quick Change Powder Die Powder Through Expander 355... $9.99 Available
MTM Flip-Top Ammo Box 17 Remington, 204 Ruger, 223 Remington... $3.49 Available Select Options

Product Information

The Hornady Powder Cop Die is the perfect for your progressive reloading press. Just install the die after the powder drop station to automatically check dropped charges. The powder cop die has an internal stem that will move up to display a white o-ring that is even with the surface of the die when the correct powder charge is in the case, when the die is properly set. If there is no powder charge in the case the stem will not rise. If there is an overcharge of powder, the stem will lift the O-ring well above the surface of the powder cop die allowing you to easily see the case is over-charged.

Technical Information

Material: Steel
Fits: Most progressive presses with 7/8"-14 thread

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

3.6

(based on 12 reviews)

Most Helpful Positive Review

This die works great in ...

This die works great in my Hornady Lock-N-Load AP. It's really not necessary for cartridges like 9mm where you easily see if the case is filled (and that overflow if double charged). However, it's really useful for cartridges like .38 Special (it easily indicates charges of 2.5 gr. Clays) and for all rifle cartridges. It'd be nice if you could adjust the indicator level with a top screw (a la bullet seating depth) rather than adjusting the whole die body -- but still a solid five stars.

Most Helpful Negative Review

The powder checker works ...

The powder checker works well with wide - straight wall brass. (45 ACP, 38 etc) It works only with normal charges of slower burning powder, as it will not indicate with small charges...Read complete review

Reviewed by 12 customers

Sort by

Displaying reviews 1-10

Previous | Next »

7/26/2011

(2 of 2 customers found this review helpful)

2.0

I thought this COP die ...

By Jeffrey

from Sioux City, IA

I thought this COP die was working great until this last saturday. It is very difficult to tell minute differences in amounts of powder while loading .45 ACP. I always make sure to check the position of my COP indicator at the top of the press stroke, but always have worried that the rod compresses the powder a bit. Well I just put some handloads through my Springfield GI 1911 and apparently had a hot load. The case was bulged, primer blown through, and ALOT more recoil than a .45 ACP should have! Luckily no one was injured and the pistol was not damaged but I will be pulling 300 bullets this week for sure.

7/17/2011

(2 of 3 customers found this review helpful)

2.0

I'm normally a fan of ...

By Greg

from El Segundo, CA

I'm normally a fan of Hornady products but I'm not sold on this one. Out of the box, the rod was sticking in the die. I polished the rod in a lathe with very fine sand paper, that seemed to help. I also found that powder sticks to it too much and was concerned that it could change charge volume from case to case with it sticking. Improvement is needed.

11/30/2010

(2 of 2 customers found this review helpful)

1.0

I thought this would be a ...

By Ernest

from Lockport, NY

I thought this would be a good idea, and it probably is if you use a larger amount of powder. However when I drop 5 grains of powder in a 45 ACP case, I can not tell much diff between that and a double charge of 10 grains. It also has some sort of plastic fingers in it that broke before I could get it lowered enough to check the 5 grains of powder. Seems to work the same way with it or without it anyway. It also seems to hang up inside the die a lot as well.I would suggest the RCBS lockout die, or go without. I really don't see how someone can double charge a case on the LNL to begin with? Unless you do it on purpose to check this die. But something like this would be handy in case of a empty case so you wont get a squib. I am going to buy a new RCBS lockout for mine and box this one up.

10/24/2010

(1 of 1 customers found this review helpful)

3.0

I've used his die for a ...

By T

from Altoona, FL

I've used his die for a couple thousand rounds and it does as claimed, it has saved me a couple times. But powder sticks to the rod and makes a mess on the shell plate. (The die has been cleaned multi. times and I even polished the rod end but the powder still sticks )

10/19/2010

(2 of 2 customers found this review helpful)

3.0

Good for what it is, but ...

By Rich

from Derry, NH

Good for what it is, but what you must remember to look at this 'Powder Cop' on each stroke of your press. Forget to look at it each time, and you may as well not have installed it!I love the Hornady stuff so I hate to say this: do yourself a big favor and don't buy this 'Powder Cop', but instead get the RCBS Lock-Out Die (Product # 536792).The RCBS Lock-Out die doesn't require you to look at it to do the job of checking your powder level. It will stop your press cold if the powder level is not within its limits.I have both the Lock-Out die and the Hornady Powder cop, now the Powder Cop sits in a box and I don't use it anymore.You won't be sorry if you go with the RCBS Lock-out die.

9/26/2010

4.0

This die does all the ...

By Joseph M.

from Belton, SC

This die does all the things claimed, however, unless they have changed, it only applies to 22 cal and above. I wanted it for 20 cal& 17 cal.

3/6/2010

(2 of 2 customers found this review helpful)

5.0

Well worth the money. ...

By Robert

from Brandon, MS

Well worth the money. Lets you know if power charge is correct at a glance! Plus peace of mind to know its not double charged!

2/25/2010

(29 of 33 customers found this review helpful)

3.0

The powder checker works ...

By Leroy

from Cypress, TX

2/25/2010

(22 of 25 customers found this review helpful)

5.0

This die works great in ...

By R. Cort

from Virginia Beach, VA

2/25/2010

(6 of 6 customers found this review helpful)

5.0

I have one of these ...

By Kristine

from New Port, CT

I have one of these powder checker mounted on my Dillon 650 in station 3. It is well designed and works right. It has saved me & my gun from destruction a couple of times due to no-charge or over-charge loading my 357 and 44 magnum cases. I was about to buy another one for my son, but read a midway post on Lee Universal decapper die - how one reloader modified this die to be a powder checker. I tried it and it works. However if you want something that checks powder load effectively out-of-the-box in a progressive press, I would recommend this Hornady powder check die...

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Hornady Powder Cop Die

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products