Reloading Supplies ▶ Presses - Reloading ▶ Progressive Reloading Presses ▶

Lee Load-Master Progressive Press Kit 32 S&W Long, 32 H&R Magnum

Product #: 218991 Lee #: 90935 UPC #: 734307909352

Loading image...

Enlarge Zoom in

$244.99

Status:

Special Order

Date expected in stock if ordered today: 08/26/2013

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Product Information

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press, and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting.

Technical Information

Press Type: Progressive Press
Auto Index: Yes
Number of Stations: 5
Frame Material: Steel, Cast Aluminum and Polymer
Frame Design: O-Frame
Frame Offset:
Frame Opening Size:
Handle Location: Bottom Right
Die Size Accepted: 7/8"-14 Threaded Dies
Die Bushing Accepted: Utilizes removable Lee 5 Station Turrets
Die Bushing Brand Used: N/A
Spent Primer Collection System: Built-In
Ram Stroke: 3-3/4"
Ram Diameter: 1-3/4"
Priming Feature: Lee Load-Master Progressive Primer Feeder
Number of Mounting Holes: 3
Mounting Hardware Included: No
Kit Includes: Carbide 3-Die Set (Full Length Sizer Die, Powder-Through Expander and Bullet Seating Die) Pro Auto-Disk Powder Measure, Case Feeder, Loaded Round Ejector, Case Catch Bin, Shellplate
Additional Features:
Warranty: 2 Year Unconditional Guarantee
Notes:

Lee warns that only CCI or Remington brand primers should be used with this reloading press. If you plan on reloading with any other brand of primers you must purchase the explosion shield (part# 5338680

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

3.5

(based on 8 reviews)

Reviewed by 8 customers

Sort by

Displaying reviews 1-8

6/8/2011

5.0

I use this press to load ...

By Andrew

from Los Angeles, CA

I use this press to load for my Dan Wesson revolver in 32 H&R. It is good. I had some help from my friend who used one for years and knows the press like the back of his hand. I also watched the set-up videos in You Tube. The press is flawless for about 3500 rounds now. This press already includes dies and a case feed device which raises its value. I just love it!!

4/7/2011

5.0

I love this press. It ...

By Sandy

from New York, NY

I love this press. It loads very fast and the price is great. It already includes dies, shellplate and case feed. However, you need to be patient to set it up properly. Avoid using the manual as it is the worst ever written. Go instead to internet videos by Shadow Dog in You tube for proper press prep. I like this press so much, I bought another one dedicated to large primers. Very satisfied indeed!!!

3/26/2011

5.0

I use this press to load ...

By Deni

from San Jose, CA

I use this press to load 32 HR for my Thompson Contender pistol. Very fast loader with nice accurate rounds made. Go online for set-up tips and you'll be loading fast, trouble free and happy. I also use this press to load 9mm with Lyman Dies no problem. I'm about to purchase the Hornady bullet feeder die for this press and expect to load more than a thousand rounds an hour. GREAT PRESS!! Thanks Lee!!

3/10/2011

5.0

OK reloader. Press set-up ...

By Jake

from San Jose, CA

OK reloader. Press set-up is critical for flawless performance. After dialing the settings properly, loaded some 4000 rounds with zero stoppage. A great press !!

3/9/2011

5.0

I set it up after ...

By Lester

from Kansas, KS

I set it up after watching all the help videos at Load Master Zone.com. Works very well for 32 H&R , loading accurate rounds for my T/C Contender pistol. Well made loader. Great work Lee!!

2/25/2010

(5 of 5 customers found this review helpful)

1.0

Very finicky. The ...

By Jamie

from Owensboro, KY

Very finicky. The indexing is too aggressive spilling powder all over the press. The powder system is inconsistent due to powder sticking on the numerous plastic parts of the disk measure. I switched over to Hornady. I feel safer.

2/25/2010

(3 of 3 customers found this review helpful)

1.0

Lots of problems. Primer ...

By Lester

from Dayton, OH

Lots of problems. Primer loaded sideways, does not auto index reliably, only 4 usable stations. Must be the black sheep from Lee's otherwise excellent product line. I soon returned mine and went to Hornady Progressive- a smooth operating and trouble free press. Sorry Lee!

2/25/2010

(1 of 1 customers found this review helpful)

1.0

I bought this despite the ...

By Holly

from Portland, OR

I bought this despite the bad hype thinking that Lee may have already solved the many feedbacks. No dice. I find it frustrating that I have to make many mods on the press to make the it work well. This included : 1) Buying a universal decapper for station 2) Drill a new hole on the case slider to load 45acp; 3) Machine the case slider 45 deg chamfer to prevent jams at the top of the ram stroke; 4) Deburr the primer trough; 5) Remove the decap pin on my sizer and put in station 2; 6) Peen the case ejector to prevent clockwise rotation of the shell plate and index jams; 7) Modify the case collator holes to prevent inverted cases in the case tubes; 8) Sand down the powder measure hopper support to reduce powder leakage; 9) Put some more adhesive on the ball handle to prevent unscrewing; 10) Use dryer sheets on the powder measure to prevent squibs.I believe that a good product should always be ready to use and works well w/o needing any special modification especially coming from the customer. The above mods required for the Lee shows it is not well made and has many inherent defects - i.e. poor design & manufacturing. I do not therefore recommend this product. Mine is on the way back to Lee....

Displaying reviews 1-8

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Lee Load-Master Progressive Press Kit 32 S&W Long, 32 H&R Magnum

Substitute Products

Suggested Products

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products