Reloading Supplies ▶ Dies - Reloading ▶ Rifle Reloading Dies ▶ 5.7x28mm FN P90 ▶

Lee Pacesetter 2-Die Set 5.7x28mm FN

Product #: 261573 Lee #: 90603 UPC #: 734307906030

Loading image...

Enlarge Zoom in

$33.99

Status:

Out of Stock, Backorder OK

Date expected in stock: 06/07/2013

Email this Page to a Friend

Quantity:

Notify Me

Please Sign In to use this feature.

Substitute Products

Others Bought

Product Information

Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shellholder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability.

Technical Information

Material: Steel

Die Types Included:

Sizer Die

Bullet Seater die with built in Roll Crimp

Accessories:

Shellholder

Powder Dipper

Load Data Sheet

Plastic Container

Notes:

Adjustable crimp

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Lee Pacesetter 2-Die Set 5.7x28mm FN

4.4

(based on 7 reviews)

Reviewed by 7 customers

Sort by

Displaying reviews 1-7

3/2/2012

(2 of 2 customers found this review helpful)

3.0

It would have gotten 5 ...

By Clayton

from DELTONA, FL

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

It would have gotten 5 stars but it said that it came with load data and it dose not, which is a real let down because load data is hard to find for 5.7

4/5/2011

(3 of 3 customers found this review helpful)

4.0

Would have given it a 5 ...

By John

from Philadelphia, PA

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

Would have given it a 5 star+ if the shell holder wasn't an issue, I am using a RCBS shell holder until Lee can fix the problem. Lee is sending me another shell holder and if the same problem exists they instructed me to send them sample cases to re-size the shell holder properly. However the dies work excellently with the 5.7 cases. I'm greatly satisfied. Lee dies always fit the bill for me and they are very cooperative to rectify any issues.

8/1/2010

(1 of 1 customers found this review helpful)

5.0

This set of dies has ...

By Bill

from Laurens, SC

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

This set of dies has worked well for my AR-57. in my opinion, they have worked better than the RCBS small base die at a great deal less than the cost of the RCBS set.

6/30/2010

(1 of 1 customers found this review helpful)

5.0

This die set works great ...

By George

from Salem, OR

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

This die set works great on brass fired from my AR57. It appears to be good match for this rifle. It works as advertised and I would buy again if needed.

6/29/2010

(1 of 1 customers found this review helpful)

5.0

I purchased a set ...

By Julius

from Kennesaw, GA

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

I purchased a set recently, and as with all Lee dies, you should expect no problems at all. I have loaded rounds with excellent results as I have with all my Lee dies. There are more expensive dies out there, but I don't think they are any better in most cases. The shell holder needs a little more relief area at the entrance and a little more clearance at the primer area, as some firing pins leave a fairly raised area around the dimple that seem to cause some interference when inserting the case. I have noticed this on Lee's .223 shell holder also. Sometimes the extractor on the firearm may also leave a slight burr on the rim of the case that causes a bit of problem when trying to insert the case into the shell holder.Wish Lee made a carbide necked rifle set that would allow you to dispense with the process of lubing.

6/19/2010

(1 of 1 customers found this review helpful)

4.0

First set of resizing die ...

By Norman

from Frederick, CO

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

First set of resizing die was leaving a divot right at the case shoulder.. Midway sent a replaced without question. Great service. Like other Lee dies, works great !

6/18/2010

(1 of 1 customers found this review helpful)

5.0

Excellent dies. Good ...

By Ana

from Portland, OR

Comments about Lee Pacesetter 2-Die Set 5.7x28mm FN:

Excellent dies. Good rounds formed - matches factory accuracy. With free shell holder. High Value...

Displaying reviews 1-7

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Lee Pacesetter 2-Die Set 5.7x28mm FN

Substitute Products

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products