Gunsmithing & Gun Parts ▶ Gun Parts by Gun Make & Model ▶ Mauser ▶ Triggers ▶

Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue

Product #: 264380 Timney #: 101 UPC #: 081950001019

Loading image...

Enlarge Zoom in

$48.99

$54.99

Save $6.00 (10%)

Sale expires 05/31/2013

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Bold Premium Rifle Trigger Mauser 98 without Side Safety 2 to... $43.99 Available
Timney Featherweight Rifle Trigger Mauser 98 without Safety... $79.99 Available

Others Bought

Product Information

Timney Sportsman Triggers feature a lightweight alloy housing and hardened steel working surfaces. They are lightweight, rugged and durable. The trigger pull is adjustable from 2 to 4 lbs and is adjustable for creep, backlash and overtravel. This trigger requires the use of the original safety. Minor fitting may be required. Fits all large and small ring Mausers including the Husqvarna, Interarms Mark X. Will not fit Swedish Mausers and carbine actions with "KAR 98" on the siderails. Will fit the Yugo M48 however stock inletting is required
Click Here for Installation Instructions

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue

4.7

(based on 42 reviews)

Reviewed by 42 customers

Sort by

Displaying reviews 1-10

Previous | Next »

4/20/2012

5.0

For my Yugo 24/47. ...

By Scott

from McMinnville, OR

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

For my Yugo 24/47. Installed in less than 5 minutes. Super crisp and a perfect fit. The factory setting was almost too snappy until I fired it and cut my groupings almost in half. Adjustments are simple and intuitive. A MAJOR improvement over the 80+ year old trigger I was using last week! Better than expected.

1/2/2012

(2 of 2 customers found this review helpful)

5.0

Great trigger. To relieve ...

By George

from Birmingham, AL

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

Great trigger. To relieve the wood for fit I use a 5/8" forster bit in a drill. Begin 1/4" in front of the leading edge of the rear stock ferrule. Drill down 5/8" overlapping each hole about half, carry this 2 inches forward. Drill the trigger opening with the same 5/8" forster bit, beginning 5/8" from leading edge of rear ferrule. Carry it 1-3/8" forward, drilling all the way out the stock bottom. Now taper the wood left between mag. opening and trigger opening from mag. opening down into trigger opening at about 45 degree angle. Clean up with small carving chisel and add linseed oil. Top and bottom metal covers all mods and the mods are very neat and professional looking if someone sees the stock without the metal. Now ready to drop in. Trial and error no longer necessary.

11/28/2011

5.0

I love this trigger, the ...

By Robert

from Yulee, FL

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

I love this trigger, the pull is so light around 2.5 lbs. Although the stock remodel was unnerving and time consuming on my German K98k. It took me about 1 1/2 hours with my dremel to fit this trigger. But well worth the time and patience this trigger is just amazing for the price.

6/16/2011

5.0

Great trigger! I put one ...

By David

from Seattle, WA

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

Great trigger! I put one in my M24/47 Yugo(8x57) Mauser with a Boyds stock ( no Dremel work needed) went from 4"-6" groups (open sights) down to 2"-3". Then I scoped it and they came down to 1-1/2" all @ 100 yards!! The factory setting is fine for me, very predictable with no creep or slack. Nice and crisp, feels like my Remington 7400. Great trigger will get one for my German K98 and Spanish M93 1916 pattern. It was definitely worth every penny.

1/11/2011

(1 of 1 customers found this review helpful)

5.0

In a Yugo 24/47 I had to ...

By Luigi

from Bethel, PA

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

In a Yugo 24/47 I had to inlet a area about the size of a sugar cube under the sear. I also had to lengthen and very slightly widen the slot for the trigger.Tools I found handy for inletting - Dremel, plus razor knife and small Mora utility knife. For trigger - small mill file and a slender round rasp (or course round file).You will need a very small drift punch to get out a pin about the size of a finishing nail that holds the trigger.Watch out for the sharp pin that holds on the clip that retains the bolt. You don't need to mess with it, but it will staple your finger!Worked fine without additional adjustment, feels like a whole new gun!

9/29/2010

5.0

I bought one of these for ...

By Craig

from Minneapolis, MN

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

I bought one of these for an M48 Yugoslavian Mauser. As was described in other posts here I did have to inlet the military stock. You will have to remove about 1/2 inch of material back from the existing cutout behind the trigger, and towards the bottom ramp it down to the trigger cutout, remove 3/8 inch from the rear of the trigger cutout to enable the action to drop straight down and avoid any trigger binding issues, and I used some 100 grit sandpaper wrapped around a 1/4 inch dowel to remove some material from the sides of the trigger cutout so the bottom of the replacement trigger's casing didn't bind in the cutout channel. About half an hour's worth of work with a sharp set of wood chisels. The trigger itself fit to the bottom of the receiver easily, and I placed a little Loctite on the setscrew and snugged it down. I had to adjust the overtravel a few turns out of the box since it had a long pull, but I was able to adjust it so it has a total of about 1/8th of an inch of pull, and it stops shortly after breaking. I love the feel of it, and I'm sure it will be a big improvement over the old two stage trigger, which wasn't bad, but could not obviously be adjusted as fine as the Timney.

9/26/2010

5.0

Easy to install, took ...

By Robert

from Suffolk, VA

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

Easy to install, took under 10 minutes. If anyone is wondering, this will work on the Remington model 798, which is what I bought this trigger for, and it works great!

9/1/2010

5.0

I have this trigger ...

By Alfred

from Show Low, AZ

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

I have this trigger assembly on a Belgium FN 98 action and it is superb. It was easy to install and I adjusted it to 1.9 lbs pull no creep or overtravel really makes this rifle a sweet shooter.

2/25/2010

(4 of 4 customers found this review helpful)

5.0

Very easy to install. ...

By Daniel

from Columbia, MO

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

Very easy to install. Took all of 10 min. I had wanted to install on a German K98, however it would not fit without removing some wood so instead I bought one of those advance technologies mauser stocks and the trigger dropped right in. Trigger pull is great. HUGE improvement over the original military one. Will buy two more for my other mausers.

2/25/2010

(23 of 27 customers found this review helpful)

4.0

I purchased this for my ...

By Daniel

from Arcadia, CA

Comments about Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue:

I purchased this for my Yugo M48A (the only difference between an M48 and M48A is that the magazine floorplate of the M48A is stamped). At the time of this writing, MidwayUSA's Technical Specifications & Use page claims "Will not fit Yugo M48", which I find odd, because when I ordered this product not too long ago, it actually said "Timney recommends this product for the Yugo M48", or something like that . . .In any case, will it fit the M48? Depends . . . installing the trigger itself is a piece of cake: 1) simply remove the old trigger, 2) correctly line up the new trigger with the trigger pinhole on the receiver, 3) insert trigger pin, 4) tighten installation screw (a drop of thread locker would be nice here).The bad news comes if you're using the original military stock . . . there is not enough space in the stock to accommodate the Timney trigger (which is greater in size than the original trigger) . . . fortunately, this is where a Dremel tool (or a comparably suitable instrument) comes in rather handy; I used my Dremel 400 XPR with a coarse drum sanding tip to remove enough wood from the stock to allow the Timney trigger to fit. I was able to get this done before the night was over; if you're experienced at this sort of thing, you can probably get the job done in minutes (or at least in less than an hour).If you are NOT using an original military stock, the trigger may or may not fit, depending on the stock . . .Anyway, once all that is taken care of, you're rewarded with a single-stage trigger that is completely free of creep (and slack), very lightweight (even at the default 4 pound setting), and breaks with almost imperceptible movement. It's night and day compared to the original two-stage military trigger, which is quite a bit heavier, moves quite a bit more when it breaks (or so I remember anyway), and has a VERY *slight* bit of creep if you work hard trying to detect it.I left the trigger's adjustments at factory settings: 4lbs is good enoug

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4 lb Blue

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products