Reloading Supplies ▶ Presses - Reloading ▶ Reloading Press Parts & Accessories ▶ Lee Press Parts ▶

Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long

Product #: 284969 Lee #: 90894 UPC #: 734307908942

Loading image...

Enlarge Zoom in

$27.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Others Bought

Product Information

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Technical Information

Fits: Lee Pro 1000, Load-Master Progressive Press
Function: Bullet Feed Kit
Material: Plastic, Metal
Kit Includes: Feeder tube, Stand, Hardware, Feed die and fingers for listed caliber
Notes: Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die (shorter) required to seat bullets (not included). Pre-1992 presses require a new shellplate carrier (Available only from Lee Precision)

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long

3.1

(based on 7 reviews)

Reviewed by 7 customers

Sort by

Displaying reviews 1-7

5/15/2012

4.0

Just loaded my first 100 ...

By Derek

from G, MI

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

Just loaded my first 100 rounds of 9mm with the bullet feeder. It was a bit finicky at first... I had to get the fingers lined up under the bullet seater die, and bend the end of one of the rods so it didn't slip out of its hole. Once that was done however it worked great. I was even using MBC lead bullets but the bullet lube posed no problems. Certainly goes much faster now and I no longer have to fiddle putting each bullet in by hand. Well worth the price, I will be getting another for my .45 caliber press.

2/25/2010

(15 of 15 customers found this review helpful)

4.0

I liked this product. For ...

By Bill

from McDonough, GA

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

I liked this product. For the 1000 operators mount it about 20deg off of the edge primer tray other wise they tend to bump. The only improvement I think they could make would be to put a restrictor or rubberband that will keep the claws closed or help them hold the bullet a little tighter, after extended use mine drops the bullets about 1 in 6 times.

2/25/2010

4.0

There good but use the ...

By David

from New Bedford, MA

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

There good but use the right dies. The bullet goes on the same everytime, but not built for speed.

2/25/2010

(4 of 4 customers found this review helpful)

1.0

Well this is my opinion. ...

By ryan

from s jordan, ut

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

Well this is my opinion. This bullet feeder did not work at all for me, I spent 3 hours trying to make it work and it just would not work no matter what I did. I do not recommend this to anyone, but this is my opinion. Good luck.

2/25/2010

(2 of 2 customers found this review helpful)

3.0

I mounted this bullet ...

By Brady

from Milton, LA

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

I mounted this bullet feed on an old RCBS AmmoMaster Progressive press. Not the best design but for my experiment I couldnt beat the price. The linkage system is the flaw in the design. The single linkage arm torques the device and causes it to bind. I removed the linkage system completely, put a simple handle on the back of it and actuate the feeder by hand. It is still faster and easier than placing the bullet on the case by hand. No fumbling trying to get the bullet to sit straight on the case for seating. I installed the 4 tube high capacity kit on it and I'm now loading 9mm at a much faster rate. I know I still have to take time to refill the tubes but its better than the time and aggravation of feeding the bullets by hand. I know it's not made for an RCBS press but it still works. I had to put a spacer to raise the unit 5/16 of an inch higher. Install it above the die nut with a second die nut over it to lock it in place. I also bought a 45 cal model for one of my other AmmoMaster progressive presses... Safe loading... BMB

2/25/2010

(31 of 31 customers found this review helpful)

4.0

I have only used this ...

By Terry

from Issaquah, WA

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

I have only used this with 9mm, 115 grain, electroplated bullets so far but it works great with them! Directions that come with the unit are a little sketchy. Orient the operating rod as close to vertical as possible and put a light coat of grease on the rod before operating.

2/25/2010

(8 of 8 customers found this review helpful)

2.0

Very 'iffy'. Must get ...

By James

from Altus, OK

Comments about Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long:

Very 'iffy'. Must get precise length of feeder for your bullet. Dremel modifications are the norm to get the thing to feed. Then, IF you have ANY problem with the press to alter loading sequence, you are in trouble. Primers and Powder with Loadmaster are case triggered. This thing is not. Also it drops bullets and is very picky which ones it will feed. I broke several sets of fingers loading semi wadcutters. Then I just took the things off the two presses I had them on.. ONLY part I like is the little bracket which goes on the ram, and that lets the chain stand off from the machine better.. Little time was saved loading the tubes, watching for malfunctions, correcting problems,etc.. And the mechanism gets in the way.

Displaying reviews 1-7

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 355 to 365 Diameter .46" to .60" Long

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products