Gunsmithing & Gun Parts ▶ Gunsmithing Tools ▶ Barrel Vises, Action Wrenches & Receiver Tools ▶

Wheeler Engineering Barrel Nut Wrench Savage 10, 110

Product #: 288765 Wheeler Engineering #: 123038 UPC #: 661120230380

Loading image...

Enlarge Zoom in

$22.89

$25.49

Save $2.60 (10%)

Sale expires 05/31/2013

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Others Bought

Product Information

The double-ended Savage Barrel Nut Wrench allows easy removal of the barrel nut on both early and late model Savage 10 and 110 series rifles. Will also fit the model 12 rifles. Features two 1/2" square drive holes for a swing bar or torque wrench. Made from 3/16" steel.

Note: Barrel nut wrench will work with both large shank and small shank Savage barrels.

Additional Information

Wheeler Engineering Savage Barrel Nut Wrench Instructions (PDF)

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Wheeler Engineering Barrel Nut Wrench Savage 10, 110

4.8

(based on 17 reviews)

Most Helpful Positive Review

The wrench is machined to ...

The wrench is machined to fit the barrel nut with very little or no play. This prevents wrench wobble and damage to the nut flutes during removal. The wrench also incorporates both round and square teeth; make sure they match the flutes of the nut on your rifle. Once the barrel is anchored with the appropriate vise, a sharp rap or 2 with 3 lb. dead blow hammer will usually loosen the nut. Do not file on the wrench; be patient; lightly shake it while you apply forward pressure; it will slide on. If the wrench fits loose it will damage and ruin your nut. After installing your new barrel make sure the headspace is set correctly. To do this properly you must remove the extractor and the ejector from the bolt head. Caution: Both have small springs that will fly if you're not careful. If you have any doubt AT ALL, concerning correct headspace, consult a competent gunsmith. Don't be the last one in your family to hear the infamous words: "Hey ya'll watch this".

Most Helpful Negative Review

Doesn't fit the nut on an ...

Doesn't fit the nut on an old 340B 22 Hornet, the nut has round bottom grooves but is smaller in diameter than newer barrel nuts. Works great on a new model 12FV! Outside edges...Read complete review

Doesn't fit the nut on an old 340B 22 Hornet, the nut has round bottom grooves but is smaller in diameter than newer barrel nuts. Works great on a new model 12FV! Outside edges are a little sharp so file them smooth or wear gloves.

Reviewed by 17 customers

Sort by

Displaying reviews 1-10

Previous | Next »

12/4/2012

5.0

great product would buy again

By Steve Meredith Gun Smith

from Hardiinsburg, IN

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

rebarreled a savage 110 with a adams and bennet barrel that i threaded and chambered in a 35 X 25 wssm for deer hunting in Indiana

6/20/2012

5.0

Just received this ...

By Jeremy

from Western, CO

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Just received this product. I'm happy to report that in addition to the wrench you see here, this now also COMES WITH A WRENCH FOR THE SMOOTH NUT newer models! It also comes with a brass shim to keep from marring the smooth nut. Best value on the net for these tools.

1/1/2012

4.0

I've removed 3 new ...

By Robert

from Chula Vista, CA

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

I've removed 3 new barrels so far, the fit could be better, however, very little marring was caused. Must have for savage owners

11/22/2011

5.0

Made from 1/4" hardened ...

By Ryan

from Jaffrey, NH

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Made from 1/4" hardened laser-cut steel. It fit my barrel nut PERFECT, with no play at all. I made a set of wooden barrel blocks, put them in my vice, and hit this barrel wrench with a mid weight plastic mallet very quick and brisk to break the nut free.

4/18/2011

(1 of 1 customers found this review helpful)

5.0

Must have tool when ...

By DAN

from FLAGSTAFF, AZ

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Must have tool when removing the Savage barrel nut...You must use the Wheeler action wrench, also to make it a breeze...I also used some AR-15 barrel vice jaws the had several barrel sizes that fit the heavy barrel of the Savage...I heated the barrel nut just hot enough to the touch and it came off without a hitch....Must have tools for the switch barrel rifle~!

5/31/2010

(0 of 1 customers found this review helpful)

5.0

Get it! This made it ...

By Jim

from Raleigh, NC

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Get it! This made it simple to pull the 223 barrel from my model 10 Savage action. I replaced it with a Shilen pre-chambered 221 Fireball TN .250 heavy target barrel, averages 0.5" groups and better, some a lot better. I used a 1/2" breaker bar wrench with and a 3' pipe, no prob, easy control and no damage. Savage actions are great! Installed a Rifle Basix target trigger for this (from Midway) too.

5/14/2010

5.0

Very nice wrench! I ...

By WILLIAM

from SPANAWAY, WA

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Very nice wrench! I swapped barrels to my new Shilen barrel on my Savage mod12 204 Ruger with no problems. Nice tight fit to ensure nut removal without scaring or damaging barrel nut, just carefully work the wrench on the nut, it will go. Also... buy or make a barrel vice. 10 min. barrel swap with this wrench and headspace gages. Thank you Midway and Wheeler!

2/25/2010

(23 of 23 customers found this review helpful)

5.0

I had a stubborn barrel ...

By Neil

from Canton, GA

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

I had a stubborn barrel nut, so my wrench was subjected to some abuse. I beat on it with a dead blow hammer, I pulled on it with a socket wrench, and overall subjected it to serious abuse. The wrench is still usable, but the teeth were bent and the socket holes were distorted in the process. If it can take this abuse and still be useable, it is worthy of five stars. I hope my next rebarrel job is not this difficult!

2/25/2010

(12 of 12 customers found this review helpful)

5.0

Save yourself the time ...

By Joe

from Elyria, oh

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Save yourself the time and $$ and get this wrench... or you can do what I did; Use a pipe wrench, ruin the barrel nut, buy the wrench anyway and another nut. I suggest just getting it.

2/25/2010

(2 of 2 customers found this review helpful)

5.0

Used this to pull the ...

By Charles

from Gorham, ME

Comments about Wheeler Engineering Barrel Nut Wrench Savage 10, 110:

Used this to pull the barrel from my Savage F-Class target action. It did the job with no issues. One observation, the teeth and edges are a bit rough on the tool. However it didn't mark up the nut so no complaints here.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Wheeler Engineering Barrel Nut Wrench Savage 10, 110

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products