PTG Headspace Go Gage 6.8mm Remington SPC

Product #: 319645 PTG #: 319645
$27.99
Status:
Date expected in stock: 06/16/2013
Notify Me
X

We're very sorry, but due to extremely high demand and limited supply, we are unable to provide reliable notifications for this product. Therefore, the "Notify Me" feature has been disabled.

Please Sign In to use this feature.

Product Information

Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a Go Gage only. Both a Go Gage and a No Go Gage are required to properly headspace a barrel.

These Go Gages represent the lower limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage is inserted, then the firearm is within acceptable minimum headspace dimensions.

Technical Information

Material:
  • A2 Tool Steel

    Notes:

    Go Gage:
  • Ascertains correct headspace dimensions by duplicating the minimum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner for firing.
  • If the firearm locks up in battery when the gage is inserted, then it is within acceptable minimum headspace dimensions and may be used.

    No-Go Gage:
  • Duplicates the distance over the maximum allowable, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner for firing.
  • If the firearm locks up in battery when the gage is inserted, then it is not within acceptable maximum headspace dimensions. The firearm should not be used and should be examined further by a knowledgeable gunsmith.

    Field Gage
  • Duplicates the maximum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner for firing.
  • If the firearm locks up in battery when the gage is inserted, then it is at the maximum acceptable headspace and should be examined further by a knowledgeable gunsmith.
    • Was this information helpful? Yes No

    This Information was not helpful because:

    Know someone who may like this? Email this Page to a Friend

    Customer Reviews

    The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    Navigation
    Recently Added
    Suggested Products