Gunsmithing & Gun Parts ▶ Grips ▶ Grips by Gun Make & Model ▶ Ruger ▶ Ruger Redhawk ▶

Hogue Monogrip Grips Ruger Redhawk Rubber Black

Product #: 348798 Hogue #: 86000 UPC #: 743108860007

Loading image...

Enlarge Zoom in

$16.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Pachmayr Presentation Grips Ruger Redhawk Rubber Black... $25.99 Out of Stock, Backorder OK
Hogue Fancy Hardwood Grips with Finger Grooves Ruger Redhawk... $57.99 Available

Others Bought

Product Information

These grips are made of soft rubber with a cobblestone (stippled) surface for good grip control. Black.

Please note: Conversion grips convert a round butt frame to a square butt feel or vice versa.

Technical Information

Material:

Soft black rubber with cobblestone (stippled) surface, not checkered
Features

One Piece Monogrip design with a stirrup that attaches the grip to the gun through the bottom of the grip.
Style

Open Backstrap, finger grooves, palm swells and is relieved for speedloaders.
Fits:

Ruger Redhawk in .357 Magnum and .44 Magnum.

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Hogue Monogrip Grips Ruger Redhawk Rubber Black

2.9

(based on 11 reviews)

Most Helpful Positive Review

I put these grips on a ...

I put these grips on a Ruger Redhawk, replacing the wooden stock grips.They go on easily and fit the gun precisely. The grips add some space for the little finger, which is nice. ...Read complete review

I put these grips on a Ruger Redhawk, replacing the wooden stock grips.They go on easily and fit the gun precisely. The grips add some space for the little finger, which is nice. However, the gun doesn't fit in the original box after being fitted. The grips felt thinner than the stock grips, haven't measured but it's likely subjective since they appear to be larger.My hands (about medium to large) fit nicely in the grips and they stick like glue. I used to have a problem of my supporting hand index finger getting whacked by the trigger guard during recoil. The grips have solved that problem for me, by not letting my shooting hand slide during recoil. Plus they make it easier to set my supporting hand in exactly the smae place over my shooting hand every time.Good product, which I'd buy again and recommend.

Most Helpful Negative Review

Poor fit on gun. Pinches ...

Poor fit on gun. Pinches my hand every time I shoot. Backstrap needs to be covered.

Reviewed by 11 customers

Sort by

Displaying reviews 1-10

Previous | Next »

3/24/2011

2.0

I've had the Pachmayr ...

By JR

from Manhattan Beach, CA

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

I've had the Pachmayr Presentation grip for ~20 years, so I thought I would try this new grip. Nice grip but way too small and does not "fill the hand" if you have a larger hand. Sent it back and kept my old Pachmayr Presentation grip!

10/4/2010

2.0

I know Hogue Monogrips ...

By Cowboy

from Fairfax, VA

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

I know Hogue Monogrips are popular on Redhawks these days, but they just don't feel very comfortable in my hands. The finger ridges are such that I have to grip the stock lower than is comfortable (for me) for holding the firearm. That lower grip makes recoil less controllable. While the grip is well made, it just doesn't work for my hands. Try this one, on an actual gun, at a gun show or store before you buy it.

2/25/2010

(4 of 6 customers found this review helpful)

3.0

Grip would be good for ...

By James

from Spring, TX

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

Grip would be good for larger hand.Not enough palm swell and grip is too long for small hand.size 9. Very rubbery.

2/25/2010

(3 of 6 customers found this review helpful)

2.0

I bought these to get a ...

By John

from Poulsbo, WA

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

I bought these to get a better grip on my 44 with full house loads. Yes, it gave me better control over the factory. The downside: During recoil, the grip flexes away from the backstrap when it pushes against your palm, getting the skin caught between them. This causes nice little cuts on your palm after about a dozen shots. I will only use it again when I wear gloves.

2/25/2010

(43 of 43 customers found this review helpful)

5.0

I put these grips on a ...

By Mike

from Juneau, AK

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

2/25/2010

(19 of 26 customers found this review helpful)

1.0

Poor fit on gun. Pinches ...

By Ray

from Jonesboro, LA

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

Poor fit on gun. Pinches my hand every time I shoot. Backstrap needs to be covered.

2/25/2010

(8 of 8 customers found this review helpful)

5.0

Purchased one of these ...

By Wallace

from Morton, Tx

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

Purchased one of these for 5 1/2" Redhawk. Took about ten minutes to take the old service style grips off and install the monogrip. A small amount of flashing covered the screw hole but was easily removed with a flat bladed screwdriver. Tightening the screw too much results in the gaping and pinching reported by some users. Just loosen off the screw a bit! A rubber or plastic mallet comes in handy when installing. At the range it transformed the hand eating grip into being quite comfortable. This gun is now definitely a keeper since the installation of this excellent product from Hogue.

2/25/2010

(5 of 6 customers found this review helpful)

4.0

I purchased this product ...

By Todd

from Highlands Ranch, co

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

I purchased this product to replace the stock wooden grips on my 44 mag "standard" Redhawk. The configuration and installation procedure is a little unorthodox, but the instructions are concise. The only thing preventing me from giving this product five stars is a small, uniform gap between the grip and the backstrap. Screw tension did not affect the severity of the gap as another reviewer had noted. However, the grip fits very well for a $20 grip and I did not experience any pinching as some others have noted. At the range, the grip transforms the standard Redhawk into an excellent hunting handgun. The difference in controllability and accuracy is dramatic. This is an excellent grip for a working handgun. It's not the most attractive grip, but for $20, the patterns I print at 100 yards are all the "pretty" I need.

2/25/2010

(3 of 5 customers found this review helpful)

3.0

I hate to give these a ...

By Dale

from Petersburg, IL

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

I hate to give these a three, but these grips cover the serial number on the butt of my .45 Colt Stainless Redhawk. For some reason the Pachmayr fits my hand better on this Redhawk. I have had excellent luck with the monogrip on my S & W 625 and Blackhawks. Check if these will cover your SN, it is a federal crime to cover the serial number. I assume later models have the number elsewhere.

2/25/2010

(8 of 17 customers found this review helpful)

1.0

The fit on my 454 casull ...

By William

from Hays, KS

Comments about Hogue Monogrip Grips Ruger Redhawk Rubber Black:

The fit on my 454 casull was quite poor. It is considerable harder and narrower than the factory grip. This resulting in pain to the web of my palm every single shot. I would not recommend this grip unless you have very small hands. After 4 diffent grips, the best one for big hands is the factory grip.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Hogue Monogrip Grips Ruger Redhawk Rubber Black

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products