This fixture gives the barrel, receiver and trigger group the correct positioning during the bedding process. Trigger guard is held partially open by the steel U-shaped bar, while the barrel is centered in the channel using the aluminum spacer to create perfect stock-to-barrel positioning.
Trigger guard is held partially open by U-shaped bar.
Barrel is centered in channel by the Cylindrical Spacer.
U-shaped bar is steel, 1-5/8" x 1 1/16"
Spacer is aluminum, 1-1/2" diameter, 2-1/2" long
Instructions for Use
Insure that the firearm is unloaded and is pointed in a safe direction, disassemble the firearm removing the rear handguard and
the trigger assembly (which may remain intact). Place the stock in a vise that is sturdy enough to hold the stock while applying
the bedding compound. Apply the bedding compound to the stock. Slide the Cylindrical Fixture onto the barrel with the
recessed shoulder facing towards the stock. The Cylindrical Fixture is prevented from sliding on the barrel by the gas cylinder
lock. When placing the barreled action into the stock, ensure that the Cylindrical Fixture is properly placed on top of the stock
ferrule. Turn the firearm over and apply any bedding compound necessary to the trigger housing area. After installing the
trigger housing assembly, use the "U" Retainer is to hold the triggerguard closed by inserting one end of the "U" Retainer into
the safety hole and the other on the outside of the triggerguard bow. This will hold the triggerguard in the proper place while
allowing the bedding compound to cure.
The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.
NOTE: Prices, specifications and availability are subject to change
We reserve the right to correct typographic, photographic and/or descriptive errors.