Buffalo Bore Ammunition 45 Auto Rim (Not ACP) +P 255 Grain Hard Cast Flat Nose Box of 20
You must be 21 years or older to order ammunition. Ammo must ship UPS ground. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering.
IMPORTANT INFORMATION ABOUT THE HEADSTAMP ON THIS BRASS: Due to limited supplies of brass, Buffalo Bore has begun loading +P and +P+ ammunition in brass that may not be indicated as such on the headstamp. Example: 9mm Luger +P+ ammunition may be designated as 9mm Luger +P or simply 9mm Luger on the headstamp.
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older pre war revovers. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Owner of Buffalo Bore Tim Sundles on Buffalo Bore 45 Auto Rim +P Ammunition:
You've been asking for a couple +P 45 AUTO RIM loads for a long time, so by popular demand, here they are. Both loads are using high quality Starline brass. We've also incorporated a flash suppressed powder so you can shoot in the dark without blinding yourself and this is important because over 95% of all civilian shootings in the USA occur in low light when the criminal element is at work. Both of these loads are the equivalent of +P+ 45 ACP ammo or as it is also known, 45 Super. These are very stout loads, but will not harm modern 45 ACP revolvers, nor will these loads harm any post war 45 ACP revolvers. Feel free to safely shoot these loads in any post war 45 ACP revolver that is in normal good operating condition.
Check out the below velocities fired from personal real world revolvers, NOT test barrels. You'll notice that the new S&W 4 inch Mt. Gun gives speeds almost as fast as the older S&W revolvers with 5.5 and 6.5 inch barrels. This is NOT a typo. It simply shows that the new S&W revolvers are made to much tighter tolerances than the older S&W revolvers and therefore give higher velocities per inch of barrel.
Item # 32A - 255gr. hard cast flat nose bullet
Item # 32A - was designed for deep penetration with no bullet expansion. It will shoot right through stick frame and drywall construction walls and through both doors on a 2003 Dodge Ram or through a black bears, etc. It was designed for, among other things, outdoor use including black bear protection. Expect around 30 inches of penetration.
- Cannot ship via air
- Cannot ship via USPS
- Cannot ship to PO Box
Thank you! Your valuable input helps improve our product information and future product selections
Caldwell Orange Peel Targets 8" Self-Adhesive Bullseye Package...
$13.99List Price: $17.99 Save $4.00 (22%)
NRA Official Pistol Targets B-16 25 Yard Slow Fire Paper...
MidwayUSA Official USPSA Target Cardboard ...
$20.49 - $76.99Save up to $4.50 (18%)