Hogue Rubber OverMolded Rifle Stock Remington 700 BDL Short Action Varmint Barrel Channel Pillar Bed Synthetic Black
Special instructions from Hogue:
To maximize the accuracy potential of your Remington 700, your new stock has been designed to free float the barrel and register tightly against the sides of the recoil lug. Although because of slight angular variations in the recoil lug's location in each rifle, it can cause the barrel to contact one side of the barrel channel. This can be left alone and the rifle will operate properly with no modification and some rifles will not need adjustment if the barrel naturally centers itself. If the barrel does not self-center and you desire the optimum accuracy from your rifle, it is necessary to slightly rotate the recoil lug to correctly float the barrel. We have successfully performed this by following these steps:
1. Unload the rifle and remove the bolt.
2. With a pencil, mark the starting orientation between the barrel, lug and action.
3. Lay the action on a solid padded surface while holding the barrel firmly in the weak hand.
4. With a soft medium sized brass hammer, strike the bottom corner of the recoil lug in the opposite direction you want the barrel to float in the stock. The recoil lug is a separate piece of steel held tightly between the barrel and action. It will rotate. Only a very small amount of movement is necessary and can be observed by the pencil mark.
5. Keep making small adjustments while checking the fit until the barrel centers when the floor plate is bolted tightly to the rifle.
Note: If you do not feel confident, we recommend a competent gunsmith perform this adjustment for you. Take these instructions with you.
Another acceptable method is to carve out the recoil lug pocket in the stock and bed it with suitable bedding compound. Again, the rifle will operate properly without any modification to either the stock or the rifle.
Shipping Weight: 3.000 PoundsXThe total weight of the product, including the product’s packaging as it sits on our shelf. Since some products ship directly from the Manufacturer, their weight may be unavailable. Because of variations in the manufacturing process, similar products may have differing weights. Unless the product is designated as “Ships Alone”, Shipping Weight does not include the shipping box or packing materials associated with your order.
XProduct ships from MidwayUSA, separate from any other products on your order due to its size. Products that are Shipped Alone incur separate "Per Order" and "Per Pound" shipping charges.
XProduct is regulated by the US Department of Transportation (DOT) and cannot be shipped via USPS or air shipping methods. DOT-Regulated products must ship UPS Ground.
Carrier Restrictions: NoXProduct is restricted by shipping carriers and cannot be shipped to certain locations or via certain shipping methods.
HazMat Product: NoXAdditional shipping charge for HazMat products. Carriers charge extra to ship packages with products they consider hazardous, such as reloading powder and primers.
- MidwayUSA Pistol Case... $2.45 - $7.99 Closeout Special View More Options
- Pro-Shot Black Powder Ball Puller 45 to 58 Caliber 10 x 32... $3.79 Available
- Lee Case Length Gage and Shellholder 38 Super... $5.19 Available
- Hornady Lock-N-Load Bullet Comparator Basic Set with 6 Inserts... $29.99 Available
- Hoppe's Shotgun Bore Cleaning Mop 12 Gauge 5/16 x 27 Thread... $2.09 Available
- Lee Case Trimmer Cutter and Lock Stud... $7.29 Available
- Hornady Lock-N-Load Overall Length Gage Bolt Action... $33.49 Available
- Pro-Shot Shotgun Bore Cleaning Brush 16 Gauge 5/16 x 27 Thread... $2.39 Available