Shooting Gear ▶ Gun Cleaning ▶ Bore Guides, Ports & Chamber Plugs ▶

Gunslick Pro Universal Bore Guide

Product #: 410766 Gunslick #: 18008 UPC #: 076683180087

Loading image...

Enlarge Zoom in

$25.49

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Others Bought

Product Information

This universal bore guide has longer than standard tube lengths and features solvent ports so that solvents can be added directly to patches. Works with most 17 to 415 caliber centerfire bolt action rifles.

Features:

#6061 T6 anodized aluminum

Solvent port

Additional tips to fit .17 - .415 cal

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Gunslick Pro Universal Bore Guide

1.9

(based on 14 reviews)

Most Helpful Positive Review

Since I haven't tried ...

Since I haven't tried other models or makes I only rated this a 4 star. It however works very well in my opinion and I can't understand why I didn't get a bore guide a...Read complete review

Since I haven't tried other models or makes I only rated this a 4 star. It however works very well in my opinion and I can't understand why I didn't get a bore guide a long time ago. I got this for my Savage 10fp and 12fv and it fits both rifles perfectly. The interchangeable tips are screw on. The only drawback that I can see is some other makes have an o-ring at the tip to keep solvent and oil from running back into the chamber. The Gunslick guide doesn't have an o-ring. As long as you don't overload the patch with solvent or oil I don't see where this would be much of a problem.

Most Helpful Negative Review

Got this to assist in ...

Got this to assist in cleaning my Sav 10FP and if I'd just used it for the short action Sav it would have been fine, but I wanted to use it on my Sav 110...Read complete review

Got this to assist in cleaning my Sav 10FP and if I'd just used it for the short action Sav it would have been fine, but I wanted to use it on my Sav 110 .30-06 and when I tried to adjust the sleeve to set the length for the long action the handle stripped out of the plastic sleeve. Now it's just a real short blow gun, with a better solution for the plastic sleeve, it's injection molded a thicker portion right in the handle area would solve a lot of problems. I would have given it a higher rating had it not been for the handle stripping out the first time I tried to adjust the length

Reviewed by 14 customers

Sort by

Displaying reviews 1-10

Previous | Next »

4/4/2012

(1 of 1 customers found this review helpful)

1.0

The plastic tube stripped ...

By Todd

from Ashland, OR

Comments about Gunslick Pro Universal Bore Guide:

The plastic tube stripped out after about 5 or six cleanings. A really poor design and not worth the $28 they want for it. I would pay $10 for one of these if it came with a dozen of those cheap little plastic sleeves. Don't waste your money!

11/7/2011

1.0

I purchased this for a ...

By Mark

from Bonanza, OR

Comments about Gunslick Pro Universal Bore Guide:

I purchased this for a rimfire rifle. It Doesn't fit rimfires. They should say that. The adapters were all the same size, which none would work for any other rifle I have. Don't waste your money on this product.

8/29/2011

1.0

Piece of junk don't waste ...

By Troy

from Castro Valley, CA

Comments about Gunslick Pro Universal Bore Guide:

Piece of junk don't waste your money. Tried to use it on my Ruger M77 270 like it says it fits(all). The bolt lock pin dosen't even turn down to hold it in place. Save your money buy a different bore guide.

8/9/2011

2.0

A very low-quality bore ...

By Greg

from Louisville, CO

Comments about Gunslick Pro Universal Bore Guide:

A very low-quality bore guide. The sliding collar strips out. I was able to glue it all down permanently so it fits one of my rifles. That being said, the seal against the chamber has always been iffy. I'm not sure the whole thing is better than nothing. Ordered the Possum Hollow instead.

10/26/2010

1.0

The plastic sleeve is ...

By K

from Blacksburg, VA

Comments about Gunslick Pro Universal Bore Guide:

The plastic sleeve is garbage. It stripped out within a few times of using it.

10/10/2010

1.0

The aluminum guide tube ...

By Gary

from Eugene, OR

Comments about Gunslick Pro Universal Bore Guide:

The aluminum guide tube is fine. The plastic sleeve designed to be secured with an aluminum threaded bolt stripped out with the first usage. The sleeve needs to be something other than cheap plastic. Don't waste your money.

9/30/2010

2.0

As already reported by ...

By Robert

from Wasilla, AK

Comments about Gunslick Pro Universal Bore Guide:

As already reported by the other reviews of this product my sliding sleeve stipped out on the 3rd gun cleaning.

5/7/2010

4.0

Have used this piece for ...

By Gary

from Columbus, OH

Comments about Gunslick Pro Universal Bore Guide:

Have used this piece for awhile now. It fits most of the calibers I shoot. The piece is not to be cranked down tight as you can get it. If you just snug it up then use it as directed it works great. It doesn't have a rubber seal, but it does seal it self pretty good with the bushings provided for each caliber. It will not work on all rifles.

4/30/2010

1.0

The plastic guide with ...

By Charles

from Vacherie, LA

Comments about Gunslick Pro Universal Bore Guide:

The plastic guide with the knurled end is too thin for the threads and stripped out after 2 uses. The tube needs to be smaller so the plastic guide can be thicker and have more threads to support the knurled stem. I would look at some of the other brands first.

4/7/2010

1.0

The ferrule is made of ...

By Mike

from Blanchard, MI

Comments about Gunslick Pro Universal Bore Guide:

The ferrule is made of plastic and the threads striped out within a couple dozen uses I found I was better off with the possum hollow made specifically for each gun

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Gunslick Pro Universal Bore Guide

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products