Optics ▶ Bases & Mounts - Scopes ▶ M1A & M14 ▶

John Masen Weaver-Style Scope Mount M1A Late Model Matte

Product #: 412873 John Masen #: M14SM

Loading image...

Enlarge Zoom in

$45.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Product Information

A fast and easy way to attach a scope to the M1A. Quickly attaches and detaches into existing screw holds in the M1A receiver. Mount will obscure open sights.

Technical Information

Material: Aluminum

Style: Weaver

Fits: M1A/M14 Rifles

Notes:

Uses two clamping screws (both on the same side of the mount)

Clamps to top of receiver.

Scope mount will obscure open sights.

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

2.4

(based on 12 reviews)

Most Helpful Positive Review

Really an excellent value ...

Really an excellent value and a great fit. Exactly like the Springfield Armory piece but at a fraction of the price. The finish is a little strange but a couple of coats of gun ...Read complete review

Really an excellent value and a great fit. Exactly like the Springfield Armory piece but at a fraction of the price. The finish is a little strange but a couple of coats of gun oil and all is well.

Most Helpful Negative Review

What a disappointment! ...

What a disappointment! The first mount I received did not line up with the clip guide and the receiver. Not only that, the screws stripped the first time I attempted to put them in...Read complete review

What a disappointment! The first mount I received did not line up with the clip guide and the receiver. Not only that, the screws stripped the first time I attempted to put them in the gun. I had them replaced from the manufacturer since I could not find screws to fit my receiver. When the new screws came in they were covered in rust and had to be cleaned with a rotary tool. After I finally got the mount attached to the rifle, it leaned so far forward that I could not get my NM on paper at 25 yards. I had the mount replaced. The next mount arrived with another set of rusty screws (that also stripped) and an additional clip mount. Hoping that it was the clip mount causing the problems I removed the first one and was going to mount the new one on the gun. The new one broke in half as I was mounting it. As with the first clip mount it required too much altering and finally broke in half. The metal that showed from the clip mount was dark and felt like sand not shiny sheared metal. I was so disappointed that I decided to cut my losses, toss it in the trash, and try a different mount.

Reviewed by 12 customers

Sort by

Displaying reviews 1-10

Previous | Next »

2/25/2010

(8 of 8 customers found this review helpful)

3.0

Just bought my M1A Loaded ...

By Herman

from Portsmouth, VA

Just bought my M1A Loaded model. Regarding the mount, the steel in the screws is very soft, the holes do not line up, had to do quite a bit of fitting on the dovetail piece. The instructions say to line up the back hole first but this does not work, you must line up the front hole first. After looking at other reviews, maybe I got a bad one, it sometimes happens.

2/25/2010

(9 of 9 customers found this review helpful)

4.0

Very good product, ...

By Rick

from Lexington, KY

Very good product, especially considering the cost difference versus the Springfield mount. "Gunsmithing" consisted of about 1 hour of sanding on the part which slides into the stripper clip unit to get a good fit which I was willing to do to save $100. Finish was fine and the instructions were OK. Please note that you'll need a very small punch to drive a pin out of the stripper clip guide. Other than that, all you'll need is some sandpaper, a rubber mallet and maybe some loctite. Overall, a great product for the price.

2/25/2010

(13 of 13 customers found this review helpful)

1.0

What a disappointment! ...

By Johnson

from Alabaster, AL

2/25/2010

(9 of 9 customers found this review helpful)

1.0

After spending two hours ...

By James

from Ft Hood, TX

After spending two hours sanding down the block that replaces the stripper clip guide, because they didn't finish milling out the dovetail, I stripped one screw and the other one protrudes through the receiver far enough to bind the bolt. The entire thing is made of very soft steel. After much tinkering I was able to get it mounted straight and level at the same time, but then it was canted. I got the cant out but then it was pointed down about 20 degrees. If you like tinkering with guns, you can make this mount work, but I honestly believe you'd be better off spending the extra money and buying a quality product the first time.

2/25/2010

(3 of 3 customers found this review helpful)

1.0

I would not recommend ...

By Scott

from Epping, NH

I would not recommend this mount for anything heavier than an airsoft rifle. Instructions state "some fitting may be required" - I had to remove more than 3/32 of material to fit into my dovetail grove and even then it doesn't hold Zero after 50 rounds. This is supposed to be designed to fit precision M14/M1A not a cheap import SKS. I think a Leapers mount would have been better quality.

2/25/2010

(11 of 11 customers found this review helpful)

1.0

What a peice of "CRAP" ...

By William

from San Antonio, TX

What a peice of "CRAP" Spend the extra cash on a better mount. First off the screws might of well been made of lead, the metal is almost that soft. The front sight screw stripped right away even when being careful after reading other post on this mount, and when you get the srew in it's too long for the bolt to operate properly, it needs to be ground down some. The stripper clip replacement piece is not cut right so you have to grind it with a dremel tool to make it fit, then the rear screw that holds the scope against the rifle well the hole that feeds through the scope is twice the size it should be so if you hit the scope or mount with any force it will lose zero, what a hunk of junk. Don't waste your money on this one buy a better product, if I was John Masen I would be embarassed to have my name on this.

2/25/2010

(37 of 39 customers found this review helpful)

3.0

The instructions stated ...

By Gerald

from Lowell, NC

The instructions stated that some fitting was required. I spent some time shaping the dove tailed mount to get it to fit. I had hoped that the mount would have been easier to install.

2/25/2010

(7 of 7 customers found this review helpful)

1.0

Followed ALL directions ...

By R

from Willard, MO

Followed ALL directions "to-the-letter". Had no problem with stripped screws, minimal fitting to stripper-clip guide replacement guide, had to cut down receiver mount screw (as per instructions). Got mount level easily and oriented with direction of bore but offset to right approx 0.175". But hey, I can live with that(if necessary I'll just get some windage adjustable rings, right?) Blue Loc-tite on all, as per instructions. 47rnds of 1980 146gr. "Izzy" Ball and the index lug that fits into the slot on left side of receiver let loose!(1.75x5x24mm scope) not some 14x50mm monster! (Warne rings). I don't feel this is Midways fault (unless just by carrying a product they are at fault, I don't think so). I'm not going to send it back (not worth the postage) and I'll keep buying from these folks (FIRST problem EVER with anything I've gotten from them!). Save up a few more bucks and buy something better!

2/25/2010

(5 of 5 customers found this review helpful)

4.0

The mounting bracket is ...

By Peter

from San Jose, Ca

The mounting bracket is well made and finished. The only problems I had were that the dovetail portion of the stripper clip piece required some rework to fit properly and the front mounting knob/screw was too long and prevented the bolt from operating. Both items easily correctable and the price was very reasonable.

2/25/2010

(44 of 46 customers found this review helpful)

5.0

Really an excellent value ...

By Jeffrey

from Greensboro, NC

Really an excellent value and a great fit. Exactly like the Springfield Armory piece but at a fraction of the price. The finish is a little strange but a couple of coats of gun oil and all is well.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

John Masen Weaver-Style Scope Mount M1A Late Model Matte

Suggested Products

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products