Gunsmithing & Gun Parts ▶ Gunsmithing Tools ▶ Hand Tools ▶ Screwdrivers & Hex Wrenches ▶ Screwdriver Sets ▶

Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set

Product #: 439523 Wheeler Engineering #: 562194 UPC #: 661120621942

Loading image...

Enlarge Zoom in

$72.99

Status:

Out of Stock, Backorder OK

Date expected in stock: 07/29/2013

Email this Page to a Friend

Quantity:

Notify Me

Please Sign In to use this feature.

Substitute Products

Others Bought

Product Information

Wheeler Engineering has created a fantastic screwdriver set painstakingly designed to meet the needs of all your gun projects, and at a price that is affordable for everyone. This deluxe screwdriver set has just about every bit needed to work on any gun including specialty tools to help with disassembly and hollow ground flat bits specifically designed to match the thin slots in gun screws.

Technical Information

Contents:

Hinged storage box

2 handles

3" shaft extension

Hex to square drive adapter (allows using the bits with a 1/4 drive socket wrench - wrench is not included)

54 flat bits

8 Allen bits, sizes ranging from 1/16" to 3/16"

4 Phillips bits, #0, #1, #2, #3

3 Torx bits, T10, T15, T20

Note: includes two each of the very thinnest bits in this set, this is intentional as the thinnest are most likely to break

Also includes 15 specialty bits:

Weaver/Ruger scope ring clamp bit

Redfield windage screw bit

Leupold windage screw bit

Mauser stock cross bolt bit

Millett rear sight adjustment bit

1911 grip screw bushing driver

Ruger/Colt single action base pin latch nut bit

M1/M14/M1A rear sight bit

.062" pin punch

.093" pin punch

.118" pin punch

Remington 870/1100/1187 trigger plate pin punch

2" #2 Phillips

Glock replacement front sight screw bit

S&W rebound spring compressor tool

Note on bits:

The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be considered a defect, rather it means that the fastener will require some other means of removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil. Replacement bit product numbers may be found in this Wheeler Bit Chart.

Additional Information

Wheeler Engineering Deluxe Gunsmithing Screwdriver Set Instructions (PDF)

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set

4.3

(based on 39 reviews)

100%

of respondents would recommend this to a friend.

Most Helpful Positive Review

Wheelers Engineers ...

Wheelers Engineers measured the screws on 100+ antique and modern firearms to come up with a selection of bits to fit the widest variety of screws. Bits are S2 tool steel hardened to 56-58 Rockwell C. The 54 hollow ground flat screw bits are made up of 9 groups. Each group is made up of a different width, with blade thickness graduated from thin to thick. This allows the bit to completely fill the slot in the screw head and help avoid damage to screw or gun. Set also includes 15 specialty, 8 allen, 4 phillips, and 3 Torx bits. 2 triangular rubberized handles (8 and 6.25 OAL) provided with 2 shaft extension, and square to hex adapter. All packed in a molded plastic carry case that measures 8 x 10.5x 3 with 2 sturdy hinges, and a single snap latch on the front. Lid of case has a bit locator diagram that lists 6 digit part number that is stamped in each bit. When I received my set, screws had come out of hole positions and were loose in the container. The list made it easier to put them back in exactly the right place. Best/most complete set of gunsmith bits Ive purchased, and Ive tried most of them over the years. Well worth the cost to avoid damage to one firearm.

Most Helpful Negative Review

These bits are MUCH TOO ...

These bits are MUCH TOO SOFT !!! When a properly fitted bit is used in a recalcitrent screw, and only a moderate amount of torque applied, the result is usually a deformed bit....Read complete review

These bits are MUCH TOO SOFT !!! When a properly fitted bit is used in a recalcitrent screw, and only a moderate amount of torque applied, the result is usually a deformed bit. That deformation swages out the slot of the screw, and no driver will grip properly again. That results in a replacement screw required, which may not be available. I use the Wheeler set only if the screw loosens with light torque. If not, I use a properly ground HARD driver. I MUCH PREFER a driver to break, rather than deform, like these soft Wheeler drivers do. I have had a set about two years now. The commonly used bits are rounded and slick, even though only light torque has been applied to them. I am disappointed with the Wheeler driver set.

Reviewed by 39 customers

Sort by

Displaying reviews 1-10

Previous | Next »

12/12/2012

5.0

Why Didn't I Get This Years Ago!

By Davey G

from The Lone Star State

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

For years I just thought I had poor quality bits, but turns out I didn't have the RIGHT bits. Since getting the Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set I haven't messed up a screw or slipped out of a screw slot. This is a MUST-HAVE for anyone who mounts their own scopes, takes a gun out of it's stock, or actually does his own minor to major gunsmithing.

11/30/2012

4.0

Appears ars advertised

By Henry Sherwood

from Auburn, WA

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

Firearms only

11/30/2012

5.0

wheeler engineering / gunsmithing

By mark

from weston co.

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

i'm knew to the world of gunsmithing.i want to build my wife a 10/22 . (i know this dont sound like much) . but i had never done it befor . i thought i should have the rite tools to tear a gun apart.this was a great start..........yes i built the 10/22 from ground up...i got everything at midway. nice gun......

11/21/2012

(0 of 3 customers found this review helpful)

3.0

Maybe yes, and maybe NO

By M. Kane

from Idaho

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

Okay, I jst received this set as a gift. I have not used it a whole lot yet, but I can only hope that it will hold together under, at least, moderate conditions. I have noticed that Wheeler is not owned by Midway USA any more. There has to be some politics behind that sale, but as we all know, when another company takes over, and that company is worried about nothing more than profit, everything else takes a serious dive. I will just have to wait and see what happens. So far it has performed just fine, but I have NOT put the set under extreme pressures. I might recommend this to a friend?

11/18/2012

(1 of 1 customers found this review helpful)

5.0

i would buy it again.

By Larry

from Greer,SC

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

a very comprehensive and well designed set. i love it and use it all the time.

11/4/2012

(1 of 1 customers found this review helpful)

5.0

Great set

By Brad

from Omaha, NE

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

I use this set at work on a daily basis. I work at a big name outdoors store and use this primarily for installing scope rings and bases. Never had a problem with it and it has all the bits needed with a great range of thicknesses for those really thick screws down to the really thin ones.

8/21/2012

(3 of 4 customers found this review helpful)

1.0

Hi all, have some ...

By David

from Saint Petersburg, FL

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

Hi all, have some horrible news about WHEELER. I just received this 89 piece kit and let me tell you. Garbage!!! And after being verbly assalted on the phone by a suppravisor at Wheeler, it gets worse...The kit came with all the bits spilt out into the plastic, and cardboard packaging. Which was a task in itself sence the plastic box was snapped shut when I got it??? Now for the worst, the screwdriver shafts are already peeling the chrome off, and are bent, BAD!! Plus after finding out Mr. Potterfield does not own Wheeler or Tipton anymore. Nore does his son work with them anymore. Wheeler and Tipton are owned by a corperation now that really doesnt care about quality at all!!! Case in point, I bought a set of Wheeler screw driver shafts here about 2 years ago, when Larry owned them, These things had hard plastic handles with soft rubber over molded. Tappered shafts that the chrome still shines after 1000s of hours spent in and around every solvent out there. Ohhh and did I mention STRAIGHT! These new ones cheap hard plastic handles with sharp seems from incorrect injectsion molding. And straight up garbage shafts. Bits look ok but are weak, bend supper easy, way below damaging torq levels. I just thought it would be time for the whole set, should have bought it back when they were still made decent. Do yourself a big favor, dont buy this, better off spending 20 bucks at an local hardware store, still out sourced but at least priced appro. Wheeler were qualities job NONE...

8/8/2012

(2 of 2 customers found this review helpful)

4.0

Very nice set with more ...

By Scot

from Deerfield Beach, FL

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

Very nice set with more pieces then I'll ever need. The long and short handles are a nice touch too. Wheeler must have changed the packageing after complaints because mine arrived with every piece neatly in its slot after shipping. I turned the box up side down and shook it hard but again, every piece stayed in its place. My only gripe is the bits do not fit snugly into the drivers. Every bit wiggles around which I can't stand. There is no spring loaded ball bearing inside the driver as better companies have. Very irritating to me!Would love to give this product 5 stars but its lucky to get 4 from me because of that.

6/27/2012

(2 of 2 customers found this review helpful)

4.0

Love this set, only ...

By Wagenbach

from Durand, WI

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

Love this set, only problem is that magnets are weak in screwdriver, and some of the bits come out of case fairly hard.

5/11/2012

(10 of 12 customers found this review helpful)

1.0

I have been using this ...

By Fred

from Middletown, CA

Comments about Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set:

I have been using this set for a while now and find it to be of inferior quality. Bits bend under normal use. One bit snapped off the first time I used it (T10 torx). The fact that replacements are sold in 3 packs should be a warning. I have been a mechanic for 38 years and I know hand tools, almost all of which now come with a lifetime replacement warranty, these don't. Snap On price but Globemaster quality. Even the cheap Husky junk from Home Depot has a lifetime warranty, the fact that these don't tells you what the manufacturer thinks about their own quality.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Wheeler Engineering 89-Piece Professional-Plus Gunsmithing Screwdriver Set

Substitute Products

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products