Reloading Supplies ▶ Case Cleaning & Preparation ▶ Chamfer & Deburring Tools ▶

RCBS Chamfer and Deburring Tool 17 to 60 Caliber

Product #: 465641 RCBS #: 9348 UPC #: 076683093486

Loading image...

Enlarge Zoom in

$19.99

Rebate available!

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

Others Bought

Product Information

The RCBS Chamfer and Deburring tool quickly and easily chamfers and deburrs case mouths. Just insert the pointed end into the case mouth and with a few twists of the wrist a nice chamfer will be created, then flip the tool around and use the same process to remove any exterior burrs from the case mouth.

Technical Information

Fits: 17 caliber to 60 caliber cases
Function: Chamfer and deburr case mouths
Material: Steel
Notes: Hardened cutting flutes will stay sharp for years, knurled for hand or lathe use

Additional Information

RCBS Up to $50 off $300 purchase rebate!

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

RCBS Chamfer and Deburring Tool 17 to 60 Caliber

2.4

(based on 8 reviews)

Reviewed by 8 customers

Sort by

Displaying reviews 1-8

12/11/2012

4.0

Handy thing to have

By Daniel

from Pennsylvania

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

You'll poke and scratch your fingers a few times with the deburring end in the beginning, but after a few shells and getting comfortable with it, it really works nice. A few quick twists of the fingertips and you're done. I use this to chamfer and debur all of my shells, and I don't see the need for anything defferent

11/23/2012

1.0

buy the L.E. Willson instead

By ERVIN

from MEBANE, NC

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

I bought this tool locally to save shipping and wished I had saved my money. The tool lacks the pilot on the de-burring side which can cause some real problems. The cases can jump out of the tool causing you hand to be subject to cuts, if it were sharp enough. Luckly it's not that sharp. I bought this thinking it would replace my very used L.E. Willson tool, now I still need to order one and i have this as a paper weight.

7/16/2012

5.0

I started reloading with ...

By Scot

from East Bend, NC

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

I started reloading with one of these and have been very happy with it's performance. Though not as easy to use as some of the low drag chamfering tools, it still produces consistent results. Every reloader should start off using one of these before using a low drag model to get the feel for proper chamfering. More forgiving than the L.D. tool for beginners.

4/16/2012

(1 of 1 customers found this review helpful)

1.0

Very poor cutting both ...

By Stephen

from N Ferrisburgh, VT

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

Very poor cutting both inside and out, and without pilot for inside trim it hops off cases if you are not paying attention. Don't waste your time and money. I went back to my 20 year old Lyman.

2/27/2012

(1 of 1 customers found this review helpful)

5.0

I had always been ...

By RICHARD

from Westfield, MA

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

I had always been frustrated with the old (small) tool on 44/45 cases. This one works much better on the larger cases. The cutting surfaces are sharpened differently on this one than they are on my old, smaller one. I didn't think it would cut as well, but when I tried it I found that it deburred just as quickly as the old small tool and left a muck nicer finish than the old one.

2/23/2012

(2 of 2 customers found this review helpful)

1.0

Not worth a wooden nickel ...

By KEVIN

from Sedro Woolley, WA

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

Not worth a wooden nickel on 50 cal.

3/16/2011

(0 of 1 customers found this review helpful)

1.0

Not what I expected from ...

By Dean

from Sparks, Nv

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

Not what I expected from RCBS. Works fine on inside of a 50BMG, but is so close to the outside diameter it is a real challenge to use.

12/19/2010

(2 of 2 customers found this review helpful)

1.0

I have used the smaller ...

By Michael

from Charlevoix, MI

Comments about RCBS Chamfer and Deburring Tool 17 to 60 Caliber:

I have used the smaller RCBS deburring tool (which I see was made by Wilson) for probably 20 years and thousands of cases no issues. It does what is supposed to do well. It is too small for .470 cases so I ordered the larger size. This one is made in China and is too dull to work right out of the box. Try some other brand.

Displaying reviews 1-8

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

RCBS Chamfer and Deburring Tool 17 to 60 Caliber

Suggested Products

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products