Gunsmithing & Gun Parts ▶ Gun Parts by Gun Make & Model ▶ Marlin ▶ Marlin 444 ▶

Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black

Product #: 484705 Pachmayr #: 01740 UPC #: 034337017400

Loading image...

Enlarge Zoom in

$37.49

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Others Bought

Weaver Classic V-Series Rifle Scope 1-3x 20mm Dual-X Reticle... $159.99 Available
Nosler AccuBond Bullets 30 Caliber (308 Diameter) 200 Grain... $32.49 Available
Limbsaver Recoil Pad Prefit Remington 700 ADL, BDL Wood Stocks... $37.99 Available
Marlin Magazine Tube Follower Marlin 336, 444, 1895 All Models... $6.19 Available
Pachmayr F325 Deluxe Field Recoil Pad Grind to Fit 1.1" Medium... $26.49 Available
Wild West Guns Ejector Marlin 336, 444, 1894, 1895 Stainless... $24.49 Available
Wild West Guns Rifle Trigger Marlin 336, 444, 1894, 1895... $87.99 Out of Stock, Backorder OK
Weaver Top-Mount Scope Base #63B Marlin 36, 336, 444, 1895, 9,... $7.79 - $9.49 Select Options
Weaver 1-Piece Grand Slam Standard Scope Base Marlin 36, 336,... $18.02 - $22.49 Select Options

Product Information

Pachmayr's Prefit Decelerator Recoil Pads provide the ultimate in recoil control and appearance. Drill bit, anchors and screws needed for installation are included. Pachmayr® pre-fit pads are pre-ground to optimum size for the particular guns and are designed to fit within .050" tolerance on factory stocks. Pad thickness is 1". Since gun stocks may vary in size from gun to gun, please check the fit before installing the pad.

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black

1.9

(based on 16 reviews)

Most Helpful Positive Review

Fit was a bit oversize ...

Fit was a bit oversize for my .45-70 1895GS. I installed it then traced around the excess with a white marker. I then removed it and sanded off the excess using a small ...Read complete review

Fit was a bit oversize for my .45-70 1895GS. I installed it then traced around the excess with a white marker. I then removed it and sanded off the excess using a small hand sanding block with 120 grit sand paper. Fit now looks professional and the pad absorbs much more recoil than the original "brick" stock pad.

Most Helpful Negative Review

Save your shipping money ...

Save your shipping money for you will surely be sending it back. Mine came in undersize. Maybe Pachmayer needs to actually see a Marlin before making a pad for it.

Reviewed by 16 customers

Sort by

Displaying reviews 1-10

Previous | Next »

1/13/2011

(0 of 2 customers found this review helpful)

1.0

Worst buy ever. Pad is ...

By James

from Jefferson City, MO

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

Worst buy ever. Pad is 4.60 inches long, both of my 1895 stocks are at least 4.75 inches. This is 15 hundredths of an inch short. Product tolerance is said to be .05 inch. Don't even think of wasting your time ordering. If possible to actually check against rifle they might work.

2/25/2010

(22 of 33 customers found this review helpful)

5.0

Fit my 1895G perfectly! I ...

By Daniel

from Delta junction, AK

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

Fit my 1895G perfectly! I didn't even need to drill new holes in the stock. Though if it were necessary, Pachmayr DOES state in the instructions that you may need to fill the old holes with wood filler first! Wasn't the case with me, luckily. Off with the old and on with the Pachmayr in under 5 minutes, and it works nicely. Less bruising after putting a box of maxed out handloads through it. Oh, yeah, they also say in the instructions that since gunstocks vary, there may be a slight variation in how it fits your gun. I imagine this would especially be the case if you have a synthetic stock. Regardless of what may have been said in other ratings, I highly recommend it. If it still scares you, buy a Hi-Grade pad and pay extra for a gunsmith to size it for you!

2/25/2010

(8 of 11 customers found this review helpful)

2.0

Prefit pad was too small ...

By Mike

from Benicia, CA

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

Prefit pad was too small for the stock by 1/8" top to bottom and 1/16" side to side.

2/25/2010

(10 of 10 customers found this review helpful)

2.0

On the plus side, this is ...

By Jeff

from Centreville, VA

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

On the plus side, this is a very well made pad, and the screw holes line up precisely with the factory holes.On the minus side, and this is a very big minus, the pad sent to me was 1/8" undersized all the way around when fitted to my 1895G. I could have adjusted an oversized pad, but I can't add rubber to an undersized one.

2/25/2010

(7 of 11 customers found this review helpful)

2.0

Fits is very poor, not ...

By Thomas

from Huntsville, al

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

Fits is very poor, not even close on two 1895g and did not fit either one.

2/25/2010

(5 of 6 customers found this review helpful)

1.0

Worst gun related product ...

By James

from San jose, CA

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

Worst gun related product I have ever purchased. It was far too narrow to fit on either my 1895 or 1894. If that wasn't bad enough, Pachmayr was rude and unresponsive when I contacted them about it. I will never buy another Pachmayr product and if you choose to waste your money on them I wish you the best of luck because apparently your odds of getting the product advertised are slim to none.

2/25/2010

(61 of 63 customers found this review helpful)

1.0

As per other reviews, I ...

By Scott

from Avon, NY

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

As per other reviews, I was dissatisfied with the fit of this pad. It was too small and the pre-drilled holes did not line up with existing recoil pad holes. Although Pachmayer includes a drill bit & screws to install adjacent to existing holes, the Pachmayer holes slightly overlapped the factory holes, making installation impossible even if the pad had been the correct size.

2/25/2010

(24 of 25 customers found this review helpful)

4.0

Fit was a bit oversize ...

By Gary

from Chugiak, AK

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

2/25/2010

(7 of 7 customers found this review helpful)

1.0

The quality of the ...

By Brad

from Newark, CA

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

The quality of the product is excellent, but it will not fit. There is about 1/8" gap on all sides. I read the other reviews before ordering, but I thought I would be one of the lucky ones with a proper fit. I was wrong. I don't know if the pad is undersized or the stock oversize, but it comes down to the same thing in the end. Save yourself the trouble and buy a non-prefit pad and fit it to your stock.

2/25/2010

(6 of 8 customers found this review helpful)

3.0

The fit was not perfect ...

By Jeff

from Hamburg, AR

Comments about Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black:

The fit was not perfect but was willing to live with it. I believe it is luck of the draw as to if you get one that fits or not. The recoil reduction is much better and that is the main concern.

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Pachmayr Decelerator Recoil Pad Prefit Marlin 1894P-1895M-1895G (Guide Gun)-444P Wood Stock Black

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products