Forster Products manufactures precision headspace gages to maximize safety and accuracy in your rifle. These gages are necessary when finish chambering a barrel, or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. Machined from A2 tool steel, these gages are held to tolerances within 0.00015" to ensure accurate testing of your rifle's chamber.
Headspace standards are set by SAAMI (Sporting Arms and Ammunition Manufacturers Institute) specifications.
Headspace is measured from the bolt face to one of four locations, depending on the cartridge used. The measurement is taken from the rim of rimmed cases like the .30-30, or the shoulder of a necked case like the .30-06, the case mouth of a straight or tapered case like the 30 Carbine, or the belt of a belted case like the .300 Winchester Magnum.
Headspace gages are available in three different lengths, listed below, from shortest to longest:
Go Gage: Go Gages match the minimum chamber dimensions allowable under SAAMI specifications. In order to accept SAAMI maximum ammunition, the rifle must be able to chamber the correct go gage.
No-Go Gage: No-Go Gages are sized to the maximum recommended headspace dimensions. If a rifle will chamber the no-go gage, it may still be within specifications, or this could indicate excessive headspace. To determine if the rifle is safe to shoot, the chamber must be checked with the field gage.
Field Gage: Field Gages correspond to the maximum safe headspace dimension. If a rifle will chamber a field gage, it should be inspected and repaired by a competent gunsmith prior to use.
The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.
NOTE: Prices, specifications and availability are subject to change
We reserve the right to correct typographic, photographic and/or descriptive errors.