Hanson's high strength taps are useful for any number of machining projects, threading the interior surface of a hole to correspond with the desired thread pitch of a given screw, bolt or other part. This bottom tap has a very slight chamfer (tapered cutting edge) that is 1 to 2 threads in length, followed by a continuous cutting edge that enables the tap to cut threads to the very bottom of a blind hole. Lacking a proper taper to successfully start into an untapped hole, the bottom tap is best used for cleaning up or elongating existing threads. Featuring a square drive head, the tap can be paired with a Hanson T-handle tap wrench (sold separately) for manual operation, or attached to a lathe or drill press for greater precision and speed.
For a complete list of available taps and associated drill bit sizes, please refer to the "Technical Specifications & Use" link below.
Tap Types and Suggested Uses:
Bottom tap has a chamfer (taper at the end) that is 1 to 2 threads long. Use for threading close to the bottom of blind holes.
Plug tap has a chamfer that is 3 to 5 threads long. The most common chamfer for use by hand or for machine tapping
through blind holes.
Taper tap has a chamfer that is 7 to 10 threads long. Easier starting and requires less tapping torque because of the
number of working teeth. Also known as a starter tap.
All taps have a square drive head. Size of square and overall length of tap will vary by tap size.
Here for a Comprehensive List of Drill and Tap Sizes, along with pertinent dimensional details.
The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.
NOTE: Prices, specifications and availability are subject to change
We reserve the right to correct typographic, photographic and/or descriptive errors.