Graco BreaKO Mercury Recoil Reducer Standard 7/8" x 4" 14 oz
The BreaKO Reduction System will fit the draw bolt hole of some guns. If a hole must be drilled, it should be 7/8" diameter, 1/8" deeper than the reducer is long. To be effective, the unit must fit tight in the stock. By wrapping tape around both ends of the reducer it can be made to fit tight in oversize holes. If the hole is excessively tight, remove the label. Insert the reducer into the stock with the threaded hole toward the butt plate and seat firmly. Plain end points to muzzle. End with threaded hole faces butt plate. The reducer may be removed by inserting a 1/4-20 bolt into the threaded hole and pulling.
The total weight of the product, including the product’s packaging as it sits on our shelf. Since some products ship directly from the Manufacturer, their weight may be unavailable. Because of variations in the manufacturing process, similar products may have differing weights. Unless the product is designated as “Ships Alone”, Shipping Weight does not include the shipping box or packing materials associated with your order.
Product ships from MidwayUSA, separate from any other products on your order due to its size. Products that are Shipped Alone incur separate "Per Order" and "Per Pound" shipping charges.
Product is regulated by the US Department of Transportation (DOT) and cannot be shipped via USPS or air shipping methods. DOT-Regulated products must ship UPS Ground.
Product is restricted by shipping carriers and cannot be shipped to certain locations or via certain shipping methods.
Additional shipping charge for HazMat products. Carriers charge extra to ship packages with products they consider hazardous, such as reloading powder and primers.
Thank you! Your valuable input helps improve our product information and future product selections
Berger Hunting Bullets 30 Caliber (308 Diameter) 190 Grain VLD...
$54.99 - $276.99
Hogue EZG Recoil Pad Prefit Remington 870, 11-87, 1100 Wood...
Hornady Lock-N-Load AP Progressive Press Case Retainer Spring...
$2.99 - $7.99
Hornady Lock-N-Load Die Bushings...
$10.29 - $43.99
Butler Creek Flip-Up Rifle Scope Cover Objective (Front)...
Butler Creek Flip-Up Rifle Scope Cover Eyepiece (Rear)...
$9.59 - $9.79
Remington Rear Trigger Guard Screw 700 ADL, BDL Hex Head ...
$4.99 - $6.19
Choate Magazine Tube Extension Remington 870, 1100, 11-87 12...
$44.99 - $45.99
Atlas Bipod Flush Cup 1913 Flat Back Rail 4" Steel Black...
Redding Competition Shellholder Set #6 (7mm Remington Magnum,...
Graco Adjustable Length, Height, Angle Buttplate Standard...
- XS Full Length Scope Mount Rail Ruger Gunsight Scout Aluminum...