Reloading Supplies ▶ Case Cleaning & Preparation ▶ Chamfer & Deburring Tools ▶

L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber

Product #: 789334 L.E. Wilson #: DBT-REG

Loading image...

Enlarge Zoom in

$15.49

Status:

Out of Stock, Backorder OK

Date expected in stock: 07/25/2013

Email this Page to a Friend

Quantity:

Notify Me

Please Sign In to use this feature.

Substitute Products

Others Bought

Product Information

The L.E. Wilson Chamfer and Deburring tool is perfect for smoothing the inside and outside of the case mouth for easier bullet seating. Universal design works on all cases from 17 to 45 caliber.

Technical Information

Material: Steel
Size: Works with 17 to 45 Caliber Cases

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber

4.8

(based on 17 reviews)

Most Helpful Positive Review

I have one of these that ...

I have one of these that is 20 -30 years old and it still works very well. The sore hand problem was cured by turning an aluminum collar that covers the points. it is...Read complete review

I have one of these that is 20 -30 years old and it still works very well. The sore hand problem was cured by turning an aluminum collar that covers the points. it is about 1/4 inch wide and just covers the points and leaves the front open and gives extra gripping diameter. I left the tool in the freezer while turning the .620 ID, heated the collar and then tapped the tool inside the collar and finished pressing together in my vice.

Most Helpful Negative Review

It works fine, but the ...

It works fine, but the metal leaves black grime on my hands. No such trouble with the Hornady tool, which I slightly prefer.

Reviewed by 17 customers

Sort by

Displaying reviews 1-10

Previous | Next »

7/28/2012

5.0

Switched to this tool ...

By Daryl

from Arnold, MD

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

Switched to this tool from the Lee product that came in a kit. I really appreciate the larger size and the quality of this product. I'm using it to chamfer .45Colt and it's working great.

7/24/2012

5.0

I have used this on .223, ...

By D

from St George, UT

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

I have used this on .223, 30-30, 30-06, and it works great on all of them. Tried chucking it in a drill and it works well if I go slow. Chatters if I go too fast, or hold it at the wrong angle. I spent a little time figuring it out, and it works well for me now.

5/3/2012

5.0

Fantastic tool! I bought ...

By Jamie

from WILLIAMSON, WV

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

Fantastic tool! I bought this based on the other reviews and it was a great choice. If you are looking for one of the best deburring tools, this is it! Thanks to Larry and Midway for having such a store that carries all of these products. Keep up the good work. Thanks!

2/23/2012

5.0

I purchased this tool ...

By James

from Yaphank, NY

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

I purchased this tool when I began handloading in 1960. I have used it on many thousand of cartridges since then; from 6.5MM to .375 cal. To say this tool is durable is an understatement. It remains as sharp as the day I purchased it. I will not load a cartridge without first using this tool. Buy one, it will last forever.

2/23/2012

5.0

I've had other tools for ...

By Jim

from Huntersville, NC

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

I've had other tools for this job, but none that worked as well. The outside edge comes clean simply with 2 twists. Other tools left the edge "chattered" for lack of a better word. The inside cutter cleans up even easier. Ordered it simply because their case cutter worked so darn good!

2/8/2012

(1 of 1 customers found this review helpful)

5.0

It works! Not sure what ...

By Morgan

from Fallbrook, CA

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

It works! Not sure what else to say, its easy to use and simple. I like it as much as I can like a deburring tool...

2/1/2012

(1 of 1 customers found this review helpful)

5.0

I will start by saying ...

By Andrei

from Burke, VA

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

I will start by saying that this is the best chamfer and deburring tool I ever owned. Like many here I started with the crummy Lee tool, then tried RCBS and Lyman and now I finally stumbled upon LE Wilson and I am ecstatic. The tool has six cutting surfaces. This means you only need to move your wrist slightly and a full 360 cut is done. The body of the tool is made of solid steel, it feels good and affords a great grip that allows you to work many cases before hand fatigue sets in. With my Lee tool, I could do 6 cases in a row and then the hand would start hurting. The RCBS tool feels similar to the hand due to its nearly identical size, however, it requires more pressure against the case to make the similar cuts to the LE Wilson. The only tool that somewhat felt better in my hand was the Lyman and that was due to the large handle. With the LE Wilson tool I breezed through 100 cases of military-crimp 308. It must have taken me no more than 10 minutes, and I did it at a leisurely pace. Could there be something done about this tool to improve it? Definitely. The short size of the tool puts the pointed, sharp tail end right in the middle of your palm. That makes for some lack of comfort after many cases and all the rubbing of the sharp metal on your skin is not that pleasant. There could be three solutions to this: first, make the tool longer to avoid chafing palms, two, they could sell it with an adapter handle that will make it the same size as a Lyman (that ergonomic plastic handle feels good in hand), or, three, they could sell it along with a rubber or silicone cap that could slip over the points and make your hand feel better. With the help of a power adapter, it can be attached to a drill and it could really fly through your brass work. Overall, it is still my best working tool of the four that I have tried.

8/22/2011

(1 of 1 customers found this review helpful)

5.0

Love the way this thing ...

By Andy

from Honolulu, HI

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

Love the way this thing chamfers the neck mouths, it has a perfect angle to put the necessary chamfer. The best I've used, and even better with the P.H. power tool adapter.

3/26/2011

4.0

best out there, but not ...

By John

from Tulsa, OK

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

best out there, but not as good as my made in 1961 "made for RCBS by L.E. Wilson" one.

2/22/2011

(1 of 1 customers found this review helpful)

5.0

Well made and does a ...

By W

from Louisville, KY

Comments about L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber:

Well made and does a great job!

Displaying reviews 1-10

Previous | Next »

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

L.E. Wilson Chamfer and Deburring Tool 17 to 45 Caliber

Substitute Products

Suggested Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products