Gunsmithing & Gun Parts ▶ Universal Gun Parts ▶ Sights ▶ Rear Sights ▶ Receiver Sights ▶

Williams WGRS-336 Guide Receiver Peep Sight Set Marlin Lever Actions with Fire Sight Front Sight Aluminum Black

Product #: 945296 Williams #: 70018 UPC #: 053506700189

Loading image...

Enlarge Zoom in

$43.99

Status:

Available

Ready to ship

Email this Page to a Friend

Quantity:

Please Sign In to use this feature.

Substitute Products

TRUGLO Lever Action Sight Set Marlin 336 Rifle (Except... $31.99 Available

Others Bought

Product Information

An economical set that includes the compact low profile Williams Guide Receiver Sight and the appropriate height front sight. The Guide Receiver Sight features simple, positive screw-lock windage and elevation adjustments. In most cases the sight utilizes the existing scope mounting screw holes or dovetail on top of the receiver for installation. Red Fire Sight included.

Technical Information

Material: Light, Rustproof Aluminum Alloy

Adjustments:

Fully Adjustable for Windage and Elevation

Gunsmithing Required: No, however front sight will likely require fitting

Application Charts & Information

Was this information helpful? Yes No

This Information was not helpful because:

Know someone who may like this? Email this Page to a Friend

Customer Reviews

.prPaPagination,.pr-pagination-bottom,.prPaFooter,.pr-pagination-top,.pr-review-tools,p.pr-review-faceoff-review{display:none} .pr-review-faceoff .pr-review-faceoff-review-full{display:block} .prReviewAuthorProfileLnk{color:#000;font-weight:bold;cursor:text} .prReviewAuthorProfileLnk:hover{text-decoration:none}

Attention

JavaScript is disabled. You must enable JavaScript in order to interact with reviews or write your own.

REVIEW SUMMARY

by PowerReviews

2.9

(based on 10 reviews)

Most Helpful Positive Review

This was just what I was ...

This was just what I was looking for. A well made low profile simple sight. I put it on an 1894. Sight was made for the 336, it does not fit well when ...Read complete review

This was just what I was looking for. A well made low profile simple sight. I put it on an 1894. Sight was made for the 336, it does not fit well when installed on the 1894. When using the factory taps on an 1894, the sight overhangs the rear of the gun frame. I could have had a forward hole tapped in the gun but did not want to modify the "original" gun. I used a dremmel to drill the back of the sight to "fix" the problem. I drilled a receiver hole over the rear tap plug. Put some locktite on the plug threads and let it sit a turn or two high. Then I placed the sight over this "pin" I just made and secured the sight to the gun with one screw. Very tight, very good looking and no modification to the gun. Adjusting this little sight is not convenient like other peeps but this is a trade between the big bulk of those sights and this trim looking sight. I never adjust my sight anyway. I shoot it in for the bullet and charge I am using and hold high or low. I can't see past 100 yards and the adjustment under 100 yards is negligible anyway.

Most Helpful Negative Review

The rear sight is hard to ...

The rear sight is hard to adjust since locking screws are inconveniently placed. You need to screw off the aperture every time you need to adjust windage. Not really a big deal, but annoying nevertheless. The front bead and the riser block are not the conventional press-in design. Instead, they are held in place by miniature hex screws. Plus: it is easy to install. Minus: the whole front sight is not sturdy at all and tends to get shaken loose by recoil after a dozen shots, no matter how much I tried to tighten the screws. Also, it sits way too high, at least on my gun (Marlin 1894, .44 mag, 20" brl).

Reviewed by 10 customers

Sort by

Displaying reviews 1-10

6/19/2012

5.0

I picked up this sight ...

By Tobin

from Port Matilda, PA

I picked up this sight combo mostly because after a career in the Coast Guard I felt the receiver sight was best when not using an optic sight. I have been looking for a Marlin 336 35 Rem for many years and when I picked one up the buckhorn sight had to go. The serial number placed this 336 as a 1953 line run. The rear receiver sight needed to be placed in the 2 forward pre drilled scope mount holes, the rear 2 placed the sight extending beyond the upper receiver and too close to the hammer. The rear and front sight tapped snugly on and allowed proper alignment to center. I placed the receiver sight in mid adjustment for wind and elevation and went to my range. In a sitting position with 200 grain at 30 yards it was 1" high, unbelievable! went to 200 yards and held on top edge of paper plate and dropped my 3 shots into a fist size group centered on the lower half of the plate. I am happy.

2/20/2012

(1 of 1 customers found this review helpful)

1.0

The only thing I can say ...

By Sean

from Adamsville, RI

The only thing I can say about this sight is "Aluminum". The retention screw bit into the elevation rail with little effort and made a nice dent in it.

4/26/2010

(2 of 2 customers found this review helpful)

4.0

Works very well, even ...

By Jim

from Mechanicville, NY

Works very well, even hunting in very nasty wet and snowy winter weather where a scope doesn't cut it. I have used the WGRS in our NY Adirondack Mts. with great success having painted the factory front sight bead white on my Marlin 336 in .35 Remington. Last season I scored a again on a fast moving whitetail with the new .338 Marlin with the same set up. I like removing the aperture for the ghost ring effect, but try the twilight insert if you prefer precise aiming. You won't be disappointed either way.

2/25/2010

(9 of 10 customers found this review helpful)

2.0

Bought one for my 444ss ...

By Tim

from Newgloucester, Me

Bought one for my 444ss just barely able to sight it in front sight too short still shooting high. I guess I'll have to buy a taller front sight. So I guess you have to take your chances when you buy this set.

2/25/2010

(13 of 18 customers found this review helpful)

2.0

I bought this sight for ...

By Robert

from Petersburg, IN

I bought this sight for an early Marlin Mod 1894 .44 Mag. Mounted in the rear scope mount holes the sight hung out past the back of the receiver. It obstructed access to the hammer. Even at the lowest setting it would need a much higher front sight than the one supplied. My rifle is drilled for a side mount peep sight so I returned this sight and ordered a Williams 5D94/39 receiver sight for a pre 2001 Mod 1894. When I get it I will review it. It is well made for the price, but on a Marlin you will not be able to sight it in.

2/25/2010

(13 of 16 customers found this review helpful)

5.0

This was just what I was ...

By Charles

from Pittsburgh, PA

2/25/2010

(4 of 4 customers found this review helpful)

2.0

After installing on my ...

By Robert

from Green Bay, WI

After installing on my 1895, I found that the front sight was too low. So, another $30 directly to the manufacturer and it is better - not perfect, but better.

2/25/2010

(81 of 84 customers found this review helpful)

2.0

Very cheaply made sight. ...

By Tim

from Clackamas, Or

Very cheaply made sight. Hard to adjust. Front sight sit's awkwardly high, and the base is made of soft aluminum. So if bumped it will no doubt bend or fall off.I am going to back to the factory sights.

2/25/2010

(139 of 141 customers found this review helpful)

2.0

The rear sight is hard to ...

By John

from Geeksville, NY

2/25/2010

(13 of 13 customers found this review helpful)

4.0

I use them as back up ...

By mike

from ridgewood , ny

I use them as back up sights for Marlin 336, which has a scout scope system. I have no problems hitting the mark at 100 yards with them and yes they are a little hard to adjust, but they work well.

Displaying reviews 1-10

The statements and opinions expressed within Customer Reviews reflect each author's personal perspective and do not imply endorsement by MidwayUSA, its Employees or any other organization. Customers should in no way infer that MidwayUSA has validated review information as safe, accurate or appropriate.

NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.

Williams WGRS-336 Guide Receiver Peep Sight Set Marlin Lever Actions with Fire Sight Front Sight Aluminum Black

Substitute Products

Others Bought

Product Information

This Information was not helpful because:

Customer Reviews

Recently Added

Suggested Products