This kit produces a trigger pull of around 2-1/2 lbs. Kit is for the 10/22 only and will not fit the 10/22 Magnum. Power Custom Adjustable Kit is adjustable to eliminate pre-travel. Requires disassembly of the trigger assembly for installation. This is a matched pair. Hammer and sear should be used together.
Please Note: Some Ruger 10/22 models will require the use of two Ruger hammer bushings for proper insallation (product 510559). 10/22's that already have separate hammer bushings will not need new ones as the factory ones can be re-used.
Material: Heat treated steel
These parts are drop-in except the fitting of the sear to the safety. This requires hand stoning.
Without the hand stoning the safety will appear on but the rifle will still fire. Sear must be stoned to fit to make the safety
Drop in kit that produces a 2 ? LBS. Trigger pull.
EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims.
Does not work in the 10-22 Mag.