Vais Muzzle Brake 3/4" 257 Caliber 1/2"-32 Thread .750" Outside Diameter x 1.950" Length
Notes: These muzzlebreaks usually require the work of a gunsmith for threading and fitting purposes. Please see the below FYI section from the manufacturer.
Q. How much recoil reduction can I expect with a Vais brake?
A. Our Vais brake is very efficient at recoil reduction. Exact percentages for recoil reduction can not be listed for each caliber as it varies depending on bullet weight, barrel length, weight of the rifle and in some cases even the powder used. Recoil reduction of up to 50% is common with the large 7mm and 300 magnums. On rifles such as the 270 and 30-06 recoil reduction of 40% is common. The reason for the difference is the magnums have a much larger muzzle blast and more energy for the brake to work with to reduce recoil. Big bore rifles such as the 375 and 458 are harder to tame down for two reasons. The heavier bullets produce more recoil and the larger bores burn the powder faster. This leaves less muzzle blast for the brake to reduce recoil. Average reduction for these calibers is 30% to 35%.
Q. How does a muzzle brake work?
A. A muzzle brake is designed to capture as much of the energy contained in the muzzle blast as possible. The brake converts some of this energy into a forward thrust which counteracts some of the rifles recoil.
Q. What makes the Vais brake quieter than other brakes?
A. Our Vais brake has eight small holes drilled from the muzzle of the brake. These holes are drilled through all of the cross ports and terminate in a small expansion chamber just ahead of the barrel muzzle. This configuration very effectively vents most of the noise and concussion away from the shooter.
Q. How much velocity will I lose with a muzzle brake installed?
A. No. Velocity is not lost with a brake and in fact the velocity is very slightly increased.
Q. Will my rifle lose any of its accuracy after the brake is installed?
A. No. A brake that is properly made and installed should never hurt the accuracy of a rifle. In many cases we get reports of improved accuracy. Some of this is due to the customer shooting better because of the reduced recoil. Accuracy is sometimes improved because of the way the muzzle brake diverts gases away from the bullet path.
Q. Do you make your brake with threads to fit existing threads on my barrel?
A. Yes. We can match all of the threads used by other muzzle brakes. The brake should be installed by your gunsmith or sent to us for installation to insure proper alignment.
Thank you! Your valuable feedback helps improve our product information and offering.
Hogue EZG Recoil Pad Prefit Remington 700 Flat Back Wood Stock
- Leupold Standard Rings View More Options
- Leupold Standard Scope Base Mauser View More Options
Shilen Barrel Blank 284 Caliber, 7mm Centerfire
Clearance — Select Items$149.13 - $329.99Save up to $25.86 (15%)
GPC Universal Bolt Handle Steel in the White
Timney Rifle Trigger Remington 700, 40X with Safety 1-1/2 to 4...
Timney Sportsman Rifle Trigger Mauser 98 without Safety 2 to 4...
Timney Buehler-Style Low-Swing Safety Mauser 98 Blue
Dakota Mauser 98 Bolt Shroud with 3 Position Safety Steel in...
PTG Solid Pilot Chamber Finish Reamer 257 Roberts
PTG Barrel Threading Lathe Bit 55-Degree 3/8"