View Cart Button
 

NcStar Adjustable Front Sight Tool AK-47, SKS

 

 
Enlarge ImageEnlarge
 

Product #: 368914
Our Price: $7.00

Status: Available
Should Ship Next Business Day

Quantity


Add Product to Wish List Add Product to Wish List

Send this Page to a Friend Send this Page to a Friend

Unique tool solves the problems involved with sighting in your SKS or AK-style rifle or carbine. Solid machined steel construction for years of dependable service. Works for windage as well as elevation.


Technical Information

Material: Steel

Finish: Black

Features: Adjusts windage and elevation

Notes: This tool is designed to adjust the front sight for elevation and windage.

Manufacturer #: TAK
Used this Product? Rate It

Average Customer Rating: Above Average RatingAbove Average RatingAbove Average RatingAbove Average Rating

Kevin Bourlard of Shakopee, MN
Date Posted: 10/26/2007
This thing is a steal! It fit and performed as advertised, and is sturdy!! And as a bonus, it also adjusts the height of the front sight pin, wish had I bought this first, would have saved me the $4 I spent on the worthless little plastic tool dedicated to the task. F.Y.I. - My piece is a SAR 1 model.
Was this review helpful?  Yes |  No
2 found it helpful | 0 did not
Clayton Willig of Prospect, KY
Date Posted: 4/21/2005
Great tool for my Romanian WASR AK. Works great for adjusting the elevation and windage on your AK. Never had a problem with the tool.
Was this review helpful?  Yes |  No
4 found it helpful | 0 did not
Gerald Feikema of Warren, MI
Date Posted: 1/2/2004
Works great on Norinco and Russian SKS's. A little bulky for your pocket but a lot better than beating the sight sideways with a rock.
Was this review helpful?  Yes |  No
13 found it helpful | 4 did not
charles b of great falls, MT
Date Posted: 10/10/2005
Out of the box, this will not work with a Yugo 59/66 SKS. I give it 4 stars (-1 for having to mod it), but if didn't have a dremel tool and tried it on a Yugo 59/66, it would be totally useless. The grenade launcher interferes with the windage placement, and the elevation post is too big for the tool. However 10 minutes with a dremel tool's grinding disk fixed both problems, and now it works fine.
Was this review helpful?  Yes |  No
13 found it helpful | 0 did not
Kamikaze AK of Columbia, MO
Date Posted: 12/15/2003
This tool didn’t fit right for the Romanian AKs front site cylinder. it fits fine on the site post. You must enlarge the cylinder hole to make it work on a Romanian AK.
Was this review helpful?  Yes |  No
11 found it helpful | 4 did not
f baker of Rolla, MO
Date Posted: 10/31/2007
Not so good. Would not push the sight pen. Tool metal was so soft it spread instead.
Was this review helpful?  Yes |  No
2 found it helpful | 0 did not
Paul Hay of Newnan, GA
Date Posted: 5/15/2005
Tried one of these on 2 brand new MAK-90's. The hole was too small and had to be opened up for the sight cylinder to fit. After this modification, I found that the tool would not budge the windage adjustment on either gun. Try drilling a hole in a wooden block and using a hammer and brass punch. It works much better than this tool.
Was this review helpful?  Yes |  No
6 found it helpful | 0 did not
Arnold Meza of Kingsville, TX
Date Posted: 6/27/2004
This item is a piece of garbage. The very first time I went to adjust my elevation, the metal of this tool that wraps around the front sight started to split open! The one that came with my AK is stronger than this. Only gave 2 stars since the windage part might actually work.
Was this review helpful?  Yes |  No
18 found it helpful | 2 did not
Note: The views expressed above are those of each review author. They do not necessarily reflect the position of MidwayUSA.
Have a question? Visit GunTec Dictionary
Need a gunsmith? Visit Gunsmith Locator

To Welcome Area