View Cart Button
 

RCBS PowderMaster Electronic Dispenser 110 Volt

 
 
Enlarge ImageEnlarge
 

Product #: 753894
Our Price: $215.33

Status: Discontinued by Manufacturer


Add Product to Wish List Add Product to Wish List

Send this Page to a Friend Send this Page to a Friend

The PowderMaster Electronic Powder Dispenser delivers total accuracy at the simple push of a button. Just fill the hopper with powder and push calibrate. As the dispenser feeds to the scale, the Powder Pro Digital Scale electronically communicates powder flow rate back to the dispenser allowing it to calibrate. Once the PowderMaster is calibrated, all you need to do is enter the desired charge weight and press dispense. The powder automatically flows into the pan with accuracy of +/- 0.1 grain. One pound charge capacity. Note: Requires RCBS Powder Pro Digital Scale (sold separately) to operate. Not for use with Blackpowder.


Attention!
Discontinued product is not returnable to MidwayUSA. If defective, please contact the manufacturer.

Technical Information

Features:
  • Height 5 1/4".
  • Width 5 7/8"
  • Length 8".
  • Weight 16 ounces.
  • 16 Key Sealed Rubber Keypad.
  • One Pound Capacity.
  • Will Dispense Any Smokeless Powder, As accurate as the RCBS Powder Pro Digital Scale to +- 1/10 grain.
  • AC Powered only. (adapter included)

    Notes:
  • Must be placed close alongside the the powder scale infrared data port.
  • Type in the amount of grains you want and press Dispense. Keypad will input maximum of 99.9 grains.
    Your Dispenser will take it from there, depositing your powder directly into the powder pan resting on the Scale.
  • The Scale tells the Dispenser the actual charge weight as it's being dispensed using the infrared data port.
  • The information from the Scale allows the dispenser to precisely meter the charges, trickling the last few tenths.

  • Will not work without the Powder Scale with Infrared Data port
  • Not for use with black powder

    • Package Size Package Size
    Manufacturer #: 98999

    Application Charts & Information

    Used this Product? Rate It

    Average Customer Rating: Above Average RatingAbove Average RatingAbove Average RatingAbove Average RatingAbove Average Rating

    robert MALENSEK of Harwood, mo
    Date Posted: 3/13/2005
    I RELOAD LOTS OF RIFLE LOADS, AND I LOVE IT. I USE IT WITH THE MACHING SCALES,IT SAVES TIME AND IS VERY ACCURATE, ESPECIALY ON THE LONG LOG POWDERS THAT ARE HARD TO DROP WIT ANY CONSISTANCY.
    Was this review helpful?  Yes |  No
    2 found it helpful | 0 did not
    Dan L of Northern VA, VA
    Date Posted: 1/4/2005
    Great product for the serious reloader. Used with the elec scales, it is VERY accurate and fast when working up test loads. I still use the manual powder dump for handgun loads but for rifle loading, I don't know how I did without this unit.
    Was this review helpful?  Yes |  No
    6 found it helpful | 0 did not
    James Thomas of Pittsburgh, Pa.
    Date Posted: 7/12/2001
    What a time saver! If you do serious test loading this is the ticket. It's fast and accurate. After case prep I can load 50 rounds in approximately 45 min. I did have a problem with the unit about a year after the purchase. I sent it back to RCBS and it was returned 30 days later, good as new. I love it, couldn't live without it.
    Was this review helpful?  Yes |  No
    108 found it helpful | 5 did not
    Clifford Thompson of Weirton, WV
    Date Posted: 7/29/2002
    Unit is unstable with full load of powder in resovoir. No on/off switch to power up, unplug to shut down will wear out power jack in due time. I find it slow, but accurate, $$$$ for a electric trickler which cost under 20 bucks, not up to rcbs standards.
    Was this review helpful?  Yes |  No
    86 found it helpful | 17 did not
    Note: The views expressed above are those of each review author. They do not necessarily reflect the position of MidwayUSA.
    Have a question? Visit GunTec Dictionary
    Need a gunsmith? Visit Gunsmith Locator

    To Welcome Area