View Cart Button
 

Lee 2-Cavity Bullet Mold 329-205-1R (329 Diameter) 205 Grain 1 Ogive Radius for 8x56mm Rimmed Hungarian

 
 
Enlarge ImageEnlarge
 

Product #: 941952
Our Price: $19.79

Status: Out of Stock, Backorder OK
Date Expected In-Stock: 7/24/2008

Quantity
          or
Remind Me
Remind Me of What?

Add Product to Wish List Add Product to Wish List

Send this Page to a Friend Send this Page to a Friend

Lee mold blocks are made from aluminum because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. Lee molds produce bullets faster than iron or steel molds due to the minimized down time between casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles.


Technical Information

Material:
  • Machined Aluminum Mold Blocks
  • Hard Anodized Sprue Plate

    Common Sizer Die Diameter: 0.329"
    Hardwood Handles Included: Yes

    Notes:
  • Weights given are Lee's weights with suggested alloy; actual weight may vary due to alloy mixture used.

    For More Information, Click Below to View the Lee Bullet Mold Instructions:
    Instructions


    • Package Size Package Size
    Manufacturer #: 90775

    Application Charts & Information

    Used this Product? Rate It

    Average Customer Rating: Top RatingTop RatingTop RatingTop RatingTop Rating

    Ronald R Yates of Sturgis, MS
    Date Posted: 5/6/2007
    I emptied a pot of lead RCBS pro-melt in 90 minutes using this mold. Follow the instructions that come with the mold and this baby will turn out the bullets.
    Was this review helpful?  Yes |  No
    4 found it helpful | 0 did not
    Timothy Dearing of Medford , Or
    Date Posted: 5/10/2006
    Shoots just fine in my M95.Mold works great. I feel I got a bargain
    Was this review helpful?  Yes |  No
    14 found it helpful | 1 did not
    Jonathan Klein of Cleveland, OH
    Date Posted: 12/11/2005
    As with all Lee molds (despite their claims to the contrary) I find this mold a little tempermental, due largely to the aluminum design. Initial bullets are wrinkled, then the caster gets a few decent ones, then it gets too hot and the bullets start to appear frosted. In practice, I find this makes little difference in shooting, but is a problem encountered less with other brands of molds. That said, the bullets which are produced shoot very well from my M95 carbine, and use a standard 8mm gas check. Lee filled a needed hole in the market, and for the price, it is an excellant buy.
    Was this review helpful?  Yes |  No
    23 found it helpful | 2 did not
    Note: The views expressed above are those of each review author. They do not necessarily reflect the position of MidwayUSA.
    Have a question? Visit GunTec Dictionary
    Need a gunsmith? Visit Gunsmith Locator

    To Welcome Area