You are signed out. Sign in

CVA 1858 Remington Army Brass Frame Cap and Ball Revolver 44 Caliber 7-1/2" Blue Barrel

Product #: 132907
| Manufacturer #: RV632
Our Price: $99.99
$119.97You save $19.98!
Not available

Material:
  • Frame = Brass
  • Grip = Two Piece Walnut

    Notes:
  • 7 1/2" Octagonal Barrel
  • Six Shot Cylinder
  • .44 Caliber (.451 to .454 recommended bullet diameter)

    • Attention!
    Discontinued product is not returnable to MidwayUSA. If defective, please contact the manufacturer.

    Application Charts & Information

    Overall Rating:

    4 out of 5
    Used this Product?Rate It

    Stephen Cooper of Raleigh, NC
    Date posted: 1/5/2004
    This product exceed my expectations for the price. Extremely high quality. Very accurate. I put 6 shots into a 2" bulls eye at 75 feet on an indoor range with an 8 1/2 x 11 inch paper pistol target. Very, very pleased with this product.
    Was this review helpful?
    Yes |
    83 found it helpful |
    1 did not

    J. Winkler of Kamrar, IA
    Date posted: 4/22/2004
    A beautiful weapon. It feels solid and is a pleasure to own. You wont find a better revolver anywhere for the price.
    Was this review helpful?
    Yes |
    8 found it helpful |
    0 did not

    William Bassett of Whitehall, PA
    Date posted: 9/21/2003
    Well built, strong frame and shoots straight. Great shot at 30 meters, lots of power!
    Was this review helpful?
    Yes |
    83 found it helpful |
    13 did not

    Howarfd McAllister of Narrows , VA
    Date posted: 4/7/2004
    Well-finished pistol. It is tight and functions perfectly, Shoots as well as any fixed-sight black powder pistol I have owned. I am impressed with fit and function of parts. It's a bargain.
    Was this review helpful?
    Yes |
    13 found it helpful |
    1 did not

    Duncan Fields of miramar, fl
    Date posted: 4/13/2004
    Just received mine yesterday and just got in from shooting and cleaning. Shoots very well and is as accurate as any fixed sight wheel gun. Finish is good and tight. Lands and grooves a little shallow but it gets the job done and doubtful that I will shoot the barrel out and for that fact my grandson either. It's a value at any reasonable price.
    Was this review helpful?
    Yes |
    7 found it helpful |
    0 did not

    Glen Graves of Grants Pass, OR
    Date posted: 5/16/2005
    This revolver shoots hard, makes lots of smoke, is beautiful and I can shoot it well. It is just plain fun, and a great revolver for the price. It may shoot a hair low and to the right just a tad, but I can very easily correct for that with my hold.
    Was this review helpful?
    Yes |
    2 found it helpful |
    0 did not

    Thomas . of West Chester, OH
    Date posted: 8/3/2004
    Great to shoot with. I tried 30 grain pellets which worked very well and accurate at 25 meters. You have to love polishing brass after shooting it - but it is worth being taken care about. Everything on my model fit perfectly together, the gun looks pretty solid and good built for the price
    Was this review helpful?
    Yes |
    3 found it helpful |
    0 did not

    j dehanas of miami, ok
    Date posted: 4/24/2004
    Made by Pietta. Had to polish a couple of burrs off the cylinder latches, some minor polishing flaws on brass before action would work reliably. BUT it shoots hard and str8 with 30 grains triple7 FFg.
    Was this review helpful?
    Yes |
    8 found it helpful |
    0 did not

    Tom Dixon of Billings, Mt
    Date posted: 5/14/2004
    These Are Not Real Good, The Uberti's Are Well Worth The Extra Money!
    Was this review helpful?
    Yes |
    2 found it helpful |
    5 did not

    Anthony aucker of longview, wa
    Date posted: 2/21/2004
    Machining is very poor, tooling marks are present throughout. If buying to shoot be prepared to do alot of polishing as the brass will tarnish very quickly and deeply with each shot.
    Was this review helpful?
    Yes |
    50 found it helpful |
    10 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.