You are signed out. Sign in

NcStar Adjustable Front Sight Tool AK-47, SKS

Product #: 368914
| Manufacturer #: TAK
Status: Available
   Should Ship Today
Quantity
Our Price: $5.00
Add to Cart

Unique tool solves the problems involved with sighting in your SKS or AK-style rifle or carbine. Solid machined steel construction for years of dependable service. Works for windage as well as elevation.

Material: Steel

Finish: Black

Features: Adjusts windage and elevation

Notes: This tool is designed to adjust the front sight for elevation and windage.

Overall Rating:

3.6 out of 5
Used this Product?Rate It

Kevin Bourlard of Shakopee, MN
Date posted: 10/26/2007
This thing is a steal! It fit and performed as advertised, and is sturdy!! And as a bonus, it also adjusts the height of the front sight pin, wish had I bought this first, would have saved me the $4 I spent on the worthless little plastic tool dedicated to the task. F.Y.I. - My piece is a SAR 1 model.
Was this review helpful?
Yes |
6 found it helpful |
0 did not

Richard Gayer of Strongsville, Oh
Date posted: 11/20/2008
The tool is easy to use, and very intuitive. In no time the sight was centered for a better starting point. Lube the sight with WD 40 if it's stubborn.
Was this review helpful?
Yes |
3 found it helpful |
0 did not

Gerald Feikema of Warren, MI
Date posted: 1/2/2004
Works great on Norinco and Russian SKS's. A little bulky for your pocket but a lot better than beating the sight sideways with a rock.
Was this review helpful?
Yes |
14 found it helpful |
4 did not

Clayton Willig of Prospect, KY
Date posted: 4/21/2005
Great tool for my Romanian WASR AK. Works great for adjusting the elevation and windage on your AK. Never had a problem with the tool.
Was this review helpful?
Yes |
10 found it helpful |
0 did not

charles b of great falls, MT
Date posted: 10/10/2005
Out of the box, this will not work with a Yugo 59/66 SKS. I give it 4 stars (-1 for having to mod it), but if didn't have a dremel tool and tried it on a Yugo 59/66, it would be totally useless. The grenade launcher interferes with the windage placement, and the elevation post is too big for the tool. However 10 minutes with a dremel tool's grinding disk fixed both problems, and now it works fine.
Was this review helpful?
Yes |
16 found it helpful |
0 did not

Nathan b of Apex, NC
Date posted: 1/25/2009
Good for the money. Broke free a 1967 elevation screw on my WASR. for the windage, I had to take a drill bit and wobble out the receiving end as the receiving end diameter of the press was about 1/16 inch too small in diameter. For $5 , I didn't mind. After that, it broke it free and worked perfect. Good buy if you can tinker with it. Good quality, heavy gauge steel.
Was this review helpful?
Yes |
1 found it helpful |
0 did not

SHANE PARTRIDGE of Low Country, SC
Date posted: 4/21/2009
It works on a WASR-10 and for the price great. Was tight on mine and one thing that didn't make it great was the impression on the sight base. Might be better if it had more surface area inside of coming to a rounded point.
Was this review helpful?
Yes |
0 found it helpful |
0 did not

Kamikaze AK of Columbia, MO
Date posted: 12/15/2003
This tool didn’t fit right for the Romanian AKs front site cylinder. it fits fine on the site post. You must enlarge the cylinder hole to make it work on a Romanian AK.
Was this review helpful?
Yes |
15 found it helpful |
4 did not

KATHLEEN SMITH of ADA, MI
Date posted: 4/7/2009
The hole on the opposite side of the screw was too small. I have a Romanian WASR 10. When I tried to use the tool it was really really hard to turn and I did not want to wrench on it. I saw that the front sight round post that you push right or left would not fit in the hole. It was gouging at the metal of the hole just barely fitting in. And when I would unscrew the tool it was stuck to the post till I pulled it off. I had to put the tool in a vice spray it with WD-40 and Drill Out the hole to a bigger size. After I drilled it out I filed down the burs. Now it works.
Was this review helpful?
Yes |
0 found it helpful |
0 did not

Arnold Meza of Kingsville, TX
Date posted: 6/27/2004
This item is a piece of garbage. The very first time I went to adjust my elevation, the metal of this tool that wraps around the front sight started to split open! The one that came with my AK is stronger than this. Only gave 2 stars since the windage part might actually work.
Was this review helpful?
Yes |
22 found it helpful |
3 did not

Paul Hay of Newnan, GA
Date posted: 5/15/2005
Tried one of these on 2 brand new MAK-90's. The hole was too small and had to be opened up for the sight cylinder to fit. After this modification, I found that the tool would not budge the windage adjustment on either gun. Try drilling a hole in a wooden block and using a hammer and brass punch. It works much better than this tool.
Was this review helpful?
Yes |
9 found it helpful |
1 did not

f baker of Rolla, MO
Date posted: 10/31/2007
Not so good. Would not push the sight pen. Tool metal was so soft it spread instead.
Was this review helpful?
Yes |
5 found it helpful |
0 did not
Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.