You are signed out. Sign in

Forster Headspace No-Go Gage 22 PPC and 6mm PPC

Product #: 543745
| Manufacturer #: HG0PPCN
Status: Available
   Should Ship Today
Quantity
Our Price: $21.99
Add to Cart

Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a No Go Gage only, and both a Go Gage and a No Go Gage are required to properly headspace a barrel.

These No Go Gages represent the upper limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage inserted, then the firearm may not be within acceptable maximum headspace dimensions and should be examined further by a knowledgeable gunsmith.

SPECIAL NOTE: If you are having problems with your Forster headspace gage, Forster has requested that you contact them before returning any headspace gages to MidwayUSA. They can be contacted by phone at (815) 493-6360 or by email at info@forsterproducts.com

Material:
  • A2 Tool Steel

    Notes:

    Go Gage:
  • Ascertains correct headspace dimensions by duplicating the minimum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner for firing.
  • If the firearm locks up in battery when the gage is inserted, then it is within acceptable minimum headspace dimensions and may be used.

    No-Go Gage:
  • Duplicates the distance over the maximum allowable, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner for firing.
  • If the firearm locks up in battery when the gage is inserted, then it is not within acceptable maximum headspace dimensions. The firearm should not be used and should be examined further by a knowledgeable gunsmith.

    Field Gage
  • Duplicates the maximum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner for firing.
  • If the firearm locks up in battery when the gage is inserted, then it is at the maximum acceptable headspace and should be examined further by a knowledgeable gunsmith.

    • Application Charts & Information

    Overall Rating:

    Be the first to rate this product!
    Used this Product?Rate It
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.