ProMag Magazine Hi-Point 995 Carbine 9mm Luger 15-Round Steel Blue

Product #: 136236
| Manufacturer #: HIP-A1
Our Price: $22.50
Not available

ProMag magazine bodies are constructed of high carbon heat-treated steel and TIG-welded for strength. The springs are precision wound using heat-treated chrome silicon wire. Bases and followers are injection molded from polymers selected for their durability. The result is quality, consistency, durability and reliability.

Application Charts & Information

Overall Rating:
1.8 out of 5
Used this Product?Rate It
4 stars
terry woode of wichita, ks
Date posted: 10/18/2008
At first I was disappointed with these mags. They didn't fit my ATI stock. After beveling the mag well a little, they fit great. Then I shot with them, jam after jam. So I took a look at the factory mag and realized that the feed lips were not shaped correctly. Ten minutes later with two sets of pliers and they worked great. I own 7 right now with plans to buy 3 more. Re-shape the lips and keep the mag lightly lubed and you will have no problems.
Was this review helpful?
Yes |
22 found it helpful |
0 did not
4 stars
Dustin Ackerman of Alliance, Oh
Date posted: 5/2/2008
I have just bought this item and so far it seems to be working perfect. I have only put 200 rounds through this 1 magazine and I have had no feed problems. The one thing I did notice when I first loaded the magazine I tried to unload by hand and it was difficult which caused me some concern as how well it would perform in the firearm. Like I said no problems yet.
Was this review helpful?
Yes |
11 found it helpful |
0 did not
3 stars
TIM BIRD of provo, UT
Date posted: 7/16/2008
The problem I found was too much spring tension. Cut four raps off the top of the spring and resize the bends tighter to fit up in the follower. Keep the end bent up to maintain angle support.
Was this review helpful?
Yes |
9 found it helpful |
2 did not
3 stars
David D of Bluff City , tn
Date posted: 1/11/2008
Mags worked great on my hi-point but were hard to load.
Was this review helpful?
Yes |
10 found it helpful |
0 did not
3 stars
Larry Reeves of North wilkesboro, NC
Date posted: 4/20/2007
Junk from the factory. But some people I know have reported great sucess after modifications. The problem is that promag in all their cheapskate glory, just didn't properly bend the feed lips. Make the shape of the feed lips match your stock mags and they work great! See hipoint.7. Forumer dot com and do a search for more info
Was this review helpful?
Yes |
39 found it helpful |
1 did not
3 stars
Robert Davidson of Houston, tx
Date posted: 3/5/2009
I just took my 995 to the range today and the first bullet fired and the next 2 bullets jammed. The mag is also hard to load after the 4th round...I would not depend on these Pro Mag high capacity mags to save my life. The 10 round mag that came with the carbine worked just fine. It would be nice if they put 2 mags in with each carbine.
Was this review helpful?
Yes |
3 found it helpful |
0 did not
1 stars
James Liston of Palm coast, FL
Date posted: 8/21/2006
Both clips would not feed and chamber without jamming until only three or four cartridges were left in either clip. These name brand items are a BIG disappointment.
Was this review helpful?
Yes |
43 found it helpful |
1 did not
1 stars
A. Jackson of Vernal, UT
Date posted: 2/4/2007
Zero reliability. The only thing consistent is that it jams every time.
Was this review helpful?
Yes |
24 found it helpful |
0 did not
1 stars
bass e of green city, wi
Date posted: 7/24/2006
I totally agree with the other reviews, save your money and by factory made mags. They work fine if you want a single shot. Drop the mag down before shooting and then working the bolt to put another round in the chamber. But, why buy this when a 10 rd mag works just fine. Good idea, poor performance.
Was this review helpful?
Yes |
32 found it helpful |
0 did not
1 stars
SteveKarl Sajer of Olney, MD
Date posted: 6/2/2006
I have the same problem with these mags, They jam every time. Worthless.
Was this review helpful?
Yes |
59 found it helpful |
1 did not
1 stars
Dave A of St. Louis, MO
Date posted: 6/5/2006
I had the same problem, and mine did not want to lock into place unless you forced it to the point that the pistol grip starts to split, then you could not cycle through the mag. without a jam. I put it side-by-side with a factory mag. and could notice the mouths(lips) were at slightly different angles. Very disappointed!
Was this review helpful?
Yes |
54 found it helpful |
1 did not
1 stars
Chad Klingensmith of Clarion, PA
Date posted: 3/4/2006
I bought two of these mags and they jam on every round. They won't feed at all. I even replaced the plastic follower with a metal one from a factory Hi Point mag and it still jams. These are complete garbage.
Was this review helpful?
Yes |
313 found it helpful |
1 did not
1 stars
curtis henry of deatsville, al
Date posted: 8/12/2008
Not a good clip at all. The stock clip the gun comes with is great. This clip is bad, I got tired of messing with it jamming up my gun and threw it in the trash. Do not suggest you to buy it.
Was this review helpful?
Yes |
7 found it helpful |
0 did not
1 stars
Nick Bolgos of Jackson , MI
Date posted: 12/10/2008
I'm really glad I bought two of these because they might make a really handy war club someday. These are absolutely awful mags from the factory which is how I am rating these, you shouldn't have to modify magazines to make them feed.
Was this review helpful?
Yes |
7 found it helpful |
0 did not
1 stars
chad c of colorado springs, co
Date posted: 4/22/2009
Won't fit in gun, have to modify it to fit and work. Not worth buying 2 of them. Too much work to make them work.
Was this review helpful?
Yes |
3 found it helpful |
0 did not
1 stars
Timothy Broderick of Bedford, NH
Date posted: 3/15/2007
After the first round, all others jammed. It would not seat properly.
Was this review helpful?
Yes |
25 found it helpful |
1 did not
1 stars
Andrew Derbah of Detroit, Mi
Date posted: 8/10/2007
Big disappointment, I thought they fixed this (jamming) problem by now and they haven't. I was completely shafted by my gun dealer. If you enjoy shooting for sport or use your gun for home protection. DO NOT BUY THIS PRODUCT
Was this review helpful?
Yes |
14 found it helpful |
1 did not
1 stars
Andrew Thompson of Pontiac, IL
Date posted: 12/25/2007
I was not happy; I could not understand why MidwayUSA can sell this item. It does not work. Could not fire one single round. I bought two clips went to range Jam jam jam. I had a hard time getting the rounds out of the clips by hand. Loaded up two 10 round clips and 2 8 round clips, both of which feed fine all day. I held the clips together and they did not look the same. Come on sell something with quality. I guess I should have read the reviews first before I bought the clips.
Was this review helpful?
Yes |
17 found it helpful |
0 did not
Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.
WEBSRVR5