Lee Carbide 3-Die Set 9mm Luger

Product #: 140349
| Manufacturer #: 90509
Status: Available
   Should Ship Today
Quantity

Set includes a Carbide Sizer Die, Powder Through Expander Die, Bullet Seater Die and a 2 year warranty. Reloading with carbide dies requires no sizing lube.

Technical Information

Material: Steel

Accessories:

  • Plastic Container
  • Shellholder
  • Powder dipper
  • Load data sheet

    Notes:
  • Adjustable crimp from slight taper to full roll

    • Application Charts & Information

    Overall Rating:
    4.6 out of 5
    Used this Product?Rate It
    5 stars
    Skip Green of Waterloo, NE
    Date posted: 5/15/2006
    Pretty impressive die set. I didn't believe the reviews till I used one. Great and accurate rounds formed. Simple to set-up. Each die performs 2 functions. I also bought a Lee disk dispenser for the powder/expand die. Very good and highly convenient automatic charging especially on a turret press or progressive press. Good product!
    Was this review helpful?
    Yes |
    14 found it helpful |
    1 did not
    5 stars
    Paul Campo of Fraser, MI
    Date posted: 11/21/2001
    I've put lead bullets, plated bullets, jacketed and JHP's through the set--all ran flawlessly. The carbide set allows you to turn your brass around almost immediately and reload it. I have several thousand rounds through mine and have had VERY consistent good performance. They can NOT be beat for the money.
    Was this review helpful?
    Yes |
    68 found it helpful |
    2 did not
    5 stars
    David Sanders of Jersey, NJ
    Date posted: 8/16/2004
    Never judge a product by its price...especially reloading dies! I had always avoided Lee products due to its low low price but after 6 months shooting with my friends who use Lee dies, I've come to realize how much money I wasted on other so called premium dies. I tried them and Lee is not only good enough, but better than most other dies!! I bought this Lee 9mm die set after loading in my friend's who uses lee dies. Accuracy of formed rounds are better than factory since I was able to adjust loads and select the most accurate bullet out of my Glock 17. The free shell holder is a huge bonus! Including free load data, dipper and a 2 year warranty. I also tried Lee's classic press...very good too! Don't miss the chance of using very good products...check out Lee's...it's worth the trouble!
    Was this review helpful?
    Yes |
    29 found it helpful |
    0 did not
    5 stars
    Trevor Train of Sedalia, MO
    Date posted: 5/18/2006
    Super good product for loading 9mm!! I have a XD pistol and rounds formed by these Lee dies chamber with no jams. Accuracy good at 2" at 20yds. Free shell holder is a nice inclusion. Dies works fine in an RCBS single stage and turret press. Lee brand is great for pistol dies!!
    Was this review helpful?
    Yes |
    12 found it helpful |
    1 did not
    5 stars
    Chris Hurly of Panama city, FL
    Date posted: 7/21/2008
    Great set of dies for the money. Very accurate. A must buy for reloaders.
    Was this review helpful?
    Yes |
    5 found it helpful |
    2 did not
    5 stars
    Chris Boot of Orlando, FL
    Date posted: 5/12/2006
    One of the better dies around. I used this for loading 9mm Luger for my Beretta 92FS. The bullets formed are as good, if not better, than factory Winchester rounds. Fired off sandbags from 25 yds, bullets form a neat 2" cluster for 5 shots. I am impressed with this die set and getting ready to buy Lee 41 mag dies for my Taurus revolver. Well worth the price with free shell holder!!
    Was this review helpful?
    Yes |
    11 found it helpful |
    0 did not
    5 stars
    Stephen Murphy of Statesville, NC
    Date posted: 5/9/2008
    This is my third set of Lee dies. They always perform reliably without any difficulties, and the price is consistently lower than competing brands. Lee provides the shellholder in the set, and most other brands list that as a separate item, with additional cost. That always surprises me: if you are purchasing dies for a very specific cartridge, you also need the appropriate shell holder, so why not include it with the die set, like Lee does? I use the Lee Auto Disk powder measure in conjunction with my dies to produce target ammo for pistols and have been very pleased with the performance of Lee products.
    Was this review helpful?
    Yes |
    8 found it helpful |
    1 did not
    4 stars
    Benjamin Lethco of Rural Retreat, VA
    Date posted: 7/22/2001
    I have been reloading for over 15 years, Lee is the die of choice. For the money they can't be beat. This particular 9mm set does a good job and can be set to give a crimp or not. When you set the bullet length it will keep it accurate.
    Was this review helpful?
    Yes |
    61 found it helpful |
    0 did not
    4 stars
    Bob Schneider of Bothell, WA
    Date posted: 2/26/2002
    I have the 3 die Carbide 9mm Lee dies and like them a lot! The carbide is real nice as it cuts down on lubing of cases. I like the no-break deprimer that Lee has although you really need to crank down on the wrenches after you make an adjustment to it. I don't use the powder fill capability as I weigh each load and use a loading block for that step. I have RCBS 357 dies with WC, SWC, and round nose bullet seater. Since all I load in 9mm is round nose, the Lee bullet seater works just fine. For a semi-auto, I think Lee makes the best prices, most complete dies and that is all I would buy. I like the shell holder being included, the powder measure and the handy instruction sheets with powder loads and more importantly bullet dimensions. It is great to have everything all in one place at my loading bench.
    Was this review helpful?
    Yes |
    32 found it helpful |
    2 did not
    4 stars
    JOSHUA JOHN of COLUMBUS, OH
    Date posted: 3/8/2009
    Works great! Only thing that I would add is that even though these are carbide dies, make sure you still lube your brass. I've had a few get stuck here or there. Otherwise it's a great set at an unbeatable price!
    Was this review helpful?
    Yes |
    2 found it helpful |
    0 did not
    4 stars
    Brian Nagao of Omaha, NE
    Date posted: 1/28/2006
    These are excellent dies. Because they are carbide you will save lot of time by not having to lube your cases and best of all they are inexpensive. Occasionally, the case is just slightly out of line with the resizing die, but I think that is more of an issue of the press (Lee 4-hole turret) because the tolerances are not as tight as a single-stage press. Because 115-grain FMJ bullets have a long ogive (long pointy tip) they are more prone to being seated just slightly off-center. This is remedied by just lightly placing the bullet into the expanded case neck and allowing the seater die to straighten it out while you operate the press. Dies work great with 124 grain FMJ and 124 JHP.
    Was this review helpful?
    Yes |
    12 found it helpful |
    0 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    WEBSRVR4