Tipton Deluxe 1-Piece Cleaning Rod 27 to 45 Caliber 40" Carbon Fiber 8 x 32 Thread

Product #: 164517
| Manufacturer #: 413662
Status: Available
   Should Ship Next Business Day
Quantity

We call these cleaning rods "deluxe" because they feature an ergonomically designed handle that spins on two sets of ball bearings - the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The "shank-through" construction also allows the user to apply "reasonable" hammer blows to the end of the cleaning rod to get a tight patch through a bore.

Technical Information

Notes:

  • Chemical Resistant
  • Will not scratch bore like a steel rod can
  • Will not embed like a coated rod can

    Thread Sizes:
  • 17 to 20 Caliber = 5-40 Thread
  • All Other Rifle and Handgun Calibers = 8-32 Thread
  • Shotgun Rods = 5/16"-27 Thread

    Rod Diameters:
  • 17 to 20 Caliber = .158"
  • 22 to 26 Caliber = .208"
  • 27 to 45 Caliber = .250"
  • 40+ Caliber = .375"
  • 50 BMG Caliber = .375"

    All rod handles are 6-1/2" in length, so to find overall rod length simply add six and a half inches to the length listed in the description.

    Warranty: 1-Year against manufacturing defects.

    Tipton Deluxe Carbon Fiber Cleaning Rods are warranted to withstand reasonable blows, torque pressures and shaft flexations during the course of normal firearm service operation. Use caution to minimize flexing the junction between the cleaning rod handle and the cleaning rod shaft. Tipton? also recommends both the use of a bore guide to protect the firearm action, and wearing prudent safety eyewear when cleaning and/or services any firearm.

    • Application Charts & Information

    Overall Rating:
    5 out of 5
    Used this Product?Rate It
    5 stars
    Elmer Hall of Petros, TN
    Date posted: 6/17/2003
    In my sixty years of hunting and cleaning rifles/shotguns this is the best cleaning rod I have ever used. I can't begin to count the rods made from aluminum I have lost not to mention the bent stainless steel rods.
    Was this review helpful?
    Yes |
    68 found it helpful |
    30 did not
    5 stars
    Steve Fretz of Philadelphia, PA
    Date posted: 6/17/2003
    This is a GREAT cleaning rod. The quality is better than my Dewey (which I have since replaced with a second Tipton). It is well worth the few extra $$.
    Was this review helpful?
    Yes |
    81 found it helpful |
    31 did not
    5 stars
    Kevin Buescher of Los alamos, NM
    Date posted: 7/18/2006
    These rods are far superior to the Dewey rods. Most of my Dewey’s have stopped turning freely, forcing me to continually rotate the rod by hand to keep the tip screwed on. The Tipton’s spin easily and follow the rifling well. The sizes in the description (40", 44", etc.) are the length of just the rod, not the handle. A handy feature of the Tipton is that there is a hole in the knob at the base of the handle. This makes it easy to hang the rod from a hook in the ceiling. This places no stress on the rod and leaves no horizontal surface to collect dust. I have had no quality issues with the Tipton’s. The handle is quite heavy, so cradling the rod can be a bit awkward until you get used to it.
    Was this review helpful?
    Yes |
    24 found it helpful |
    1 did not
    5 stars
    Michael Nice of San jose, CA
    Date posted: 10/21/2008
    I bought my first one around 10 years ago for use in my large bore African rifles. These rifles are expensive and my life depends upon them. Cleaning should not be a potential problem and I've found Tipton rods to be the best available. i've since bought additional rods for handguns and rimfire rifles as well. These are the best in the market place
    Was this review helpful?
    Yes |
    4 found it helpful |
    0 did not
    5 stars
    J. Clayton Brannon of Auburn, AL
    Date posted: 8/15/2006
    Up until now, I have been using the Dewey coated cleaning rod. I have always thought of it as an excellent cleaning tool. I still do. However, after receiving the Tipton carbon rod from Midway, I have found something I like much better. The handle’s ergonomics are superior to Dewey. The bearings are the smoothest I have seen. The rod is flexible yet stiff enough to work handily through the nastiest bore. Couple this rod with a Lucas bore guide and you’re in some high caliber cleaning business. Pun intended!
    Was this review helpful?
    Yes |
    20 found it helpful |
    2 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    WEBSRVR13