You are here: Homepage > Optics > Rings > 1" Rings > Weaver-Style > Medium > 

Weaver 1" Quad-Lock 4X4 Rings Matte Medium

Product #: 320006
| Manufacturer #: 49046
Status: Available
   Should Ship Today
Quantity

Weaver 4x4 rings have a positive grip, feature twice the gripping edges of other rings and feature a 210 degree top cap for an extra solid mount.

Technical Information

Material: Aluminum

Style: Weaver

Ring Diameter: 1"

Ring Height: .168" (measured from base of ring to bottom of scope tube)

Notes:

  • 4 screws included for each ring to balance clamping pressure.

    • Application Charts & Information

    Overall Rating:
    4.5 out of 5
    Used this Product?Rate It
    5 stars
    Craig Flanders of Lowell, IN
    Date posted: 12/27/2006
    Super product, well finished, a truck running over your weapon might loosen it....(just maybe)
    Was this review helpful?
    Yes |
    4 found it helpful |
    5 did not
    5 stars
    Gary Raff of Medical Lake, WA
    Date posted: 4/13/2007
    Light, tough and rock-solid. I first tried a set of these rings 4 years ago. Since then I've added them to 5 more rifles and shotguns. Zero problems and complaints....from both the guns and me!
    Was this review helpful?
    Yes |
    11 found it helpful |
    1 did not
    5 stars
    Tim Perkins of Greensburg, KY
    Date posted: 7/1/2007
    These are the best value rings I have ever purchased. I usually will not buy aluminum rings, but I liked the look of these, and I have not been disappointed. These are top-quality, and a great buy.
    Was this review helpful?
    Yes |
    11 found it helpful |
    2 did not
    5 stars
    Andrew Thompson of Ellicott city, MD
    Date posted: 12/12/2003
    I can't imagine a scope ever slipping in these. I use on a 12 gauge slug gun. It is like having four scope mounts instead of two. Perhaps if I welded the scope to the receiver it would be a little sturdier, but I doubt it. Excellent value.
    Was this review helpful?
    Yes |
    81 found it helpful |
    0 did not
    5 stars
    Ryan na of Sodus, NY
    Date posted: 7/11/2006
    Great rings, these are VERY light, yet hold as solid as any rings I've ever used. They are actually MORE solid, wish they were available in more options. I would have them on all my guns if they had more than medium available!!!
    Was this review helpful?
    Yes |
    12 found it helpful |
    1 did not
    5 stars
    Danny Hales of Norman, OK
    Date posted: 9/11/2006
    These rings are durable, good-looking, simple, and perform well on a 10/22T holding a big Tasco Target/Varmint scope solid to the base. They are very reasonably priced. I couldn't have picked better rings for my needs. Getcha some!
    Was this review helpful?
    Yes |
    11 found it helpful |
    2 did not
    5 stars
    s p of louisville, ky
    Date posted: 12/27/2008
    Using on a marlin 1895 44 mag., b-square base. Scope as solid as a rock.
    Was this review helpful?
    Yes |
    3 found it helpful |
    1 did not
    5 stars
    Allen Oliver of Craig, CO
    Date posted: 8/8/2001
    In a word? TUFF! Very easy to install and even easier to mount a scope in. Virtually no crosshair alingment problems! Comes with it's own wrenches too!
    Was this review helpful?
    Yes |
    118 found it helpful |
    3 did not
    5 stars
    Brian Traxler of Fayetteville, PA
    Date posted: 10/23/2008
    Used these rings to replace a crappy pair that wouldn't hold the scope tight. So far I've had no problems with these rings. They work perfectly on my Mossberg ATR 100 .270cal.
    Was this review helpful?
    Yes |
    5 found it helpful |
    1 did not
    5 stars
    Mike Dodge of Ventura, CA
    Date posted: 5/30/2009
    I have a 30-06 P17 and I went through 3 different sets of rings due to the scope slipping during shooting. My local gun dealer in Ojai said try these and if your scope moves you have bigger problems. I went through 3 boxes of ammo and the scope never moved. These are great rings and I purchased another set for my sons 270.
    Was this review helpful?
    Yes |
    2 found it helpful |
    0 did not
    5 stars
    Lee Statzer of Bristol, VA
    Date posted: 7/15/2008
    Rings are well engineered and tough as nails (really GOOD nails). Mounted tactical scope on my Bushmaster with ease. Excellent product!
    Was this review helpful?
    Yes |
    3 found it helpful |
    1 did not
    4 stars
    JOSEPH ROBY of SIERRA VISTA, AZ
    Date posted: 10/29/2009
    Decent rings for the low end. I normally use warne maxima rings at the minimum on my guns, but I needed a set fast for a gun I had just bought (i-bolt in 30/06) and couldn't wait to order a set of warne's and get them in. the rings hold well and other than the poor quality screws (go to a local hardware store and get new ones in 6-40x3/8") the rings have held up to over 200 rds of 30/06 full power loads. A great buy for those on a budget or for that beater truck rifle. Just swap out the screws and you have a good set of rings (would have given 5 stars if screws were decent).
    Was this review helpful?
    Yes |
    3 found it helpful |
    0 did not
    3 stars
    perry c of milton, fl
    Date posted: 1/10/2008
    Quad-lock is a good idea but they don't work on marlin weaver bases, I tightened them as far as I could without breaking them and they still popped right off the bases.
    Was this review helpful?
    Yes |
    4 found it helpful |
    9 did not
    1 stars
    BILLY NELSON of Chambersburg, PA
    Date posted: 8/26/2009
    I must have got a bad set. Installed a BSA Sweet 223 scope on a older Min 14. After a day at the range noticed the scope rotated. Easy fix loosened the rings leveled the cross hairs. Put the caps back on and snap! A broken screw. After I examined the bottom half noticed it's not taped deep enough. I'll fix these but beware you get what you pay for.
    Was this review helpful?
    Yes |
    4 found it helpful |
    0 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    WEBSRVR13