You are here: Homepage > Gun Cleaning > Gun Vises & Cradles > 

Tipton Gun Vise

Product #: 607786
| Manufacturer #: 782731
Status: Available
   Should Ship Next Business Day
Quantity

This vise uses a rubberized cradle and jaws to secure your firearm for safe and efficient cleaning, scope mounting and routine maintenance. All contact points are padded to prevent damaging wood, synthetic or metal surfaces. Vise features a unique quick-cam action for easy access and molded-in compartments for cleaning supplies and small parts. Made from tough, solvent-resistant polymers.

Dimensions: 28" L x 7 1/2" W

Notes:

  • Made of space age plastic, with rubber pads to keep the gun from getting scratched
  • Ratcheting cam arm to lock down the stock
  • Convenient slot for your cleaning rod when you need to lay it down
  • Two holes for large bottles of cleaning solvents, two small holes for small bottles, Two shallow dished holes for hard to find screws
  • Large cut out for the rifle bolt
  • This product is shipped Unassembled

    • Application Charts & Information

    Overall Rating:
    4 out of 5
    Used this Product?Rate It
    5 stars
    John Hunt of Prescott, AZ
    Date posted: 2/21/2005
    This really makes the drudgery of rifle cleaning easier because you no longer have to hold the gun, just your cleaning rod. The rubber feet help the vise resist sliding on my counter top and the rubber molding won't damage delicate finishes. It makes scope mounting and minor gunsmithing tasks much easier. I wish I would have bought this years ago. The only suggestion I would make is try to talk a shooting partner into splitting the 2 pack gun vise deal with you and save yourselves $10.00 each because once they see how nice it works they will want one too.
    Was this review helpful?
    Yes |
    65 found it helpful |
    1 did not
    5 stars
    Hoyt Hale of Mc minnville, TN
    Date posted: 4/25/2005
    I bought one of these gun vises a couple of months ago and I don't know how I got by this long without it! It holds my guns firmly yet will not hurt the finish on my wood stocks. I like it because it is easily adjustable and has little compartments to hold cleaning jags, solvent, tools, screws or whatever while you are working on your gun. For the price, it can't be beat!
    Was this review helpful?
    Yes |
    35 found it helpful |
    0 did not
    5 stars
    Val Otterson of Willows, Ca
    Date posted: 4/1/2006
    I borrowed a Tipton and really liked it but decided I would try the MTM gun vise as I like their other products. The MTM was very cheaply made, to light in construction and would not hold pistols. Sent it back to the Major sporting goods catalog dealer in exchange for their own brand of gun vise, it looked like the Tipton in the catalog picture. It wasn't, the cam lock would not lock the guns solid like the Tipton did. Also it was to light in construction and would slide around on my work bench like the MTM did. Third time was the charm. The Tipton gun vise will hold my grandson's Daisy BB gun up to my Big Magnum caliber model 70. Whether you are running a cleaning rod thru the barrel, or mounting a scope it holds the weapons firmly in place (including my pistols) due to its solid construction.
    Was this review helpful?
    Yes |
    92 found it helpful |
    0 did not
    5 stars
    Jimmy Batterton of Benton, AR
    Date posted: 8/18/2007
    For $40 bucks, nothing else even comes close. It is an excellent choice for scope mounting, bore sighting, bedding, and general home gunsmithing. I almost gave it 4 stars because the vice tends to cant the rifle and depending or the shape of the stock, it may not sit level. I have remedied both of these issues with simple foam padding. The Tipton pro model is more adjustable, but it is twice the price. With all of the compartments molded into the bottom, I never lose any small parts. Some of the round compartments are actually rounded on the bottom for getting those small screws with fat fingers like mine.
    Was this review helpful?
    Yes |
    24 found it helpful |
    0 did not
    5 stars
    Jim Janssen of San Diego, CA
    Date posted: 5/19/2006
    All around excellent product for cleaning, scope mounting and general maintenance. Unlike one of the other reviewers, mine holds all my firearms perfectly vertical for scope mounting and bore sighting. I was particularly impressed with the heavy duty nature of the unit; much thicker moldings than I anticipated and assembled like a breeze. If you clean a long gun more than once a year you need this.
    Was this review helpful?
    Yes |
    28 found it helpful |
    0 did not
    5 stars
    David Ruff of York, PA
    Date posted: 4/28/2006
    This is the BEST money ever spent. This is a fantastic product. I use it with my Remington 700 and my AR 15 carbine. Great for cleaning and maintenance/mounting. A must have.
    Was this review helpful?
    Yes |
    31 found it helpful |
    1 did not
    5 stars
    J. Clayton Brannon of Auburn, AL
    Date posted: 8/15/2006
    Very versatile, very well made, and something every rifle owner should have. Tipton’s vise makes minor repair work, scope mounting, and cleaning a breeze.
    Was this review helpful?
    Yes |
    17 found it helpful |
    1 did not
    5 stars
    Bradley Book of Lewistown, PA
    Date posted: 1/11/2006
    Excellent gun vise. It works for small gunsmithing jobs as well as large. From holding a gun while you inlet a barrel channel to simple cleaning tasks, this vise is up for the job.
    Was this review helpful?
    Yes |
    16 found it helpful |
    0 did not
    5 stars
    Charles Block of Orange, TX
    Date posted: 1/7/2009
    Researched many other vises. For the money, this vise is much more structurally sound, multi-application friendly and very easy to assemble. I too, will recommend this vise to my shooter friends.
    Was this review helpful?
    Yes |
    6 found it helpful |
    0 did not
    5 stars
    Joe Shooter of Mountain View, CA
    Date posted: 10/29/2008
    Great product. I put it together in about 5 minutes, and then took care of a couple sight/scope installation projects that had been waiting. It's not perfect, but I can't imagine a better product for the money. It replaces a 20 year old hand made gun vise that is prehistoric in comparison. Highly recommend.
    Was this review helpful?
    Yes |
    5 found it helpful |
    0 did not
    5 stars
    William Davidson of St Louis, Mo
    Date posted: 1/1/2009
    I have used this vise for numerous years and have given several to others as gifts. I have read most of the other reviews and they make me chuckle. I guess folks of different abilities will buy the same product and come up with different opinions. I have mounted at least 20 scopes using this vise with stocks ranging in forearm thickness from varmint to sporter style with totally satisfactory results. I don't know how I got along without this vise. I clean centerfire rifles both modern and military with this vise. I clean inline muzzeloaders also. It works very well on everything I have. I have cleaned Military semi automatics with it. I have not had the experience of having solvent running back into the bore with any rifle that I clean with this vise. The price is outstanding for the utility it provides. I'm recomending this to every shooter I know. All that have bought one or received one from me rave about it. Great product.
    Was this review helpful?
    Yes |
    10 found it helpful |
    0 did not
    5 stars
    Jeremy Hellman of Lakeside, AZ
    Date posted: 7/6/2008
    Have used these in the past in a gun shop. Nothing's better than this vice for cleaning rifles. The storage compartments come in real handy and the construction stood up to cleaning 10+ guns per day every day. This product is easy to put together, stands up to hard use, and for the price you just can't beat it.
    Was this review helpful?
    Yes |
    9 found it helpful |
    1 did not
    5 stars
    John Greer III of Mobile, AL
    Date posted: 7/20/2001
    This is better than a 3rd hand when it comes to Cleaning rifles or bore sighting one. The only draw back is it's size when it comes to putting it away. But worth the room...
    Was this review helpful?
    Yes |
    357 found it helpful |
    21 did not
    5 stars
    MICHAEL RICHARDS of CANTON, GA
    Date posted: 4/1/2009
    GREAT PRODUCT. Had a bad bolt and they sent me all the hardware. Customer Service is the best.
    Was this review helpful?
    Yes |
    1 found it helpful |
    0 did not
    5 stars
    Ray Lynch of Lena, IL
    Date posted: 6/18/2001
    I have used 5 cleaning racks for guns this one is by far the best! It is a good buy!
    Was this review helpful?
    Yes |
    129 found it helpful |
    9 did not
    4 stars
    James Rivard of Cincinnati, OH
    Date posted: 1/1/2008
    All plastic parts are heavy gauge and fit together quickly and flawlessly. I purchased this rifle vice strictly for cleaning and servicing my rifles. Though I knew before ordering it was not intended for bore sighting, I had to try it out to see for myself. And, no, the Tipton does not easily adapt itself for bore sighting. Keep that in mind should you order one for yourself. Overall I am very pleased with the quality and value of the Tipton Gun Vise.
    Was this review helpful?
    Yes |
    3 found it helpful |
    0 did not
    4 stars
    Mike Hoffman of Grayling, Mi
    Date posted: 3/16/2008
    I think it is good for the price, I do notice, as others, that the muzzle of my gun sits up very high, and will cause cleaning liquid to run back. The vice sits very low on my stock, I wish it was more centered. I do think that it is built quite well, some modifications would make it even better.
    Was this review helpful?
    Yes |
    3 found it helpful |
    0 did not
    4 stars
    Shane Tuttle of Davenport, IA
    Date posted: 6/27/2002
    I've owned this gun vise for about 2 years. Very durable, yet gentle on my old military rifle's delicate finish. It has convenient moldings to house my solvents and other supplies securely while cleaning. The vise is easily adjustable. It's worth every penny.
    Was this review helpful?
    Yes |
    79 found it helpful |
    3 did not
    4 stars
    Frank Groth of Petaluma, CA
    Date posted: 10/23/2008
    I was a little worried given some of the feedback further down the thread but apparently Tipton has listened and made some improvements. Assembly was a breeze, put it on my workbench and took turns putting a couple of different rifles and shotguns into it. Each one levelled right up and held level solid so I expect this will make scope mounting and other projects plenty easy. The cutouts and cups built into the base are handy for supplies and keeping small parts from wandering. Great value for the price. Hard to go wrong with this unit.
    Was this review helpful?
    Yes |
    3 found it helpful |
    0 did not
    3 stars
    Robert Montano of Fairfield, CA
    Date posted: 8/3/2005
    I just recently purchased one of these to help mount scopes on two rifles. I was initially pleased with the construction of the Tipton vice. However it does not work well for scope mounting. The stock clamp does not hold the rifle in a vertical alignment at all. This was true for both a Kimber HS and a Remington 700. I had to fudge things to keep the rifles vertical. This made things take extra long to complete the task. I could have done better and quicker using my old pillow method. It will work well for a general maintenance vice (cleaning, etc) but not for serious work. Perhaps I will consider their "better" model.
    Was this review helpful?
    Yes |
    40 found it helpful |
    4 did not
    3 stars
    David Murray of Bristol, VA
    Date posted: 3/28/2006
    The rifle vise is useful for cleaning but I found it difficult for scope mounting. It's too bad you can't turn your rifle upside down to torque your screws. I found the holding clamping device usually slightly off from where it should be on most rifles. So I made and adapter to cure the problem.
    Was this review helpful?
    Yes |
    8 found it helpful |
    1 did not
    3 stars
    STEVEN WILLIAMS of GEORGIA, VT
    Date posted: 8/21/2009
    I bought this vise and then returned it and bought Tipton's Best.This vise only clamps from one side so it tends to cant the rifle. Also, the mid support is not adjustable. I guess if your gun fits or you just want to bore clean it might be OK. But the "Best" is the one for scope mounting, bore sighting, and repairs.
    Was this review helpful?
    Yes |
    5 found it helpful |
    0 did not
    3 stars
    Cletus Rabideau of Suamico, WI
    Date posted: 3/25/2008
    This vise is ok for general cleaning as long as a block of wood is placed under the clamping end. It has a cant to the left when clamped in, this makes it use-less for level scope mounting. The mounting hole for one of the feet wasn't completely formed and I epoxied it in. I also used a jam nut to lock the adjusting rod, it didn't come with one.
    Was this review helpful?
    Yes |
    8 found it helpful |
    0 did not
    3 stars
    Rex Baker of Roswell, GA
    Date posted: 5/7/2007
    The gun sits in the vise at an angle and the barrell is higher than the action, so all solvent can drain into the action at it soaks. OK for minor maintenance, but can't mount scopes easily. Simply needs to be re-engineered to factor in the angles. Lower the barrel for cleaning as well as stop the canting left to right.
    Was this review helpful?
    Yes |
    15 found it helpful |
    1 did not
    3 stars
    Steve Irwin of Newport News, VA
    Date posted: 7/15/2006
    Very useful gun vise but the main problem I have with it is the clamping mechanism may not hold your rifle in a vertical position. Depending on where the circular clamp on the left side contacts your stock, it may cause it to tilt over. That doesn't particularly matter if you are just using it for a cleaning cradle but if you want to hold your rifle while mounting a scope, it is a real pain. Perhaps the newer version with a symetrical shaped clamping block will overcome the tilting problem?
    Was this review helpful?
    Yes |
    11 found it helpful |
    1 did not
    2 stars
    Mike Tavary of Lake Jackson, tx
    Date posted: 2/2/2007
    I too found the clamp pad too low to securely mount the rifle. The center post is too high to allow the gun to rest lower in the clamp. I am thinking about sawing it off. Would like to see the clamp support to have some vertical adjustment and the clamping faces to have some concave contour to more securely hold the butt stock. I like the trays and the cam locking mechanism.
    Was this review helpful?
    Yes |
    11 found it helpful |
    0 did not
    2 stars
    Thornton Jacob of Baton rouge, LA
    Date posted: 9/9/2007
    Barrel is pointed upward and the rifle is not held vertical. Other than that the construction is good.
    Was this review helpful?
    Yes |
    8 found it helpful |
    1 did not
    2 stars
    Charles Cheung of Cape Girardeau, MO
    Date posted: 5/5/2006
    The forearm rest is either too big or too small to support the hand guard and it keeps slipping. The clamp is too low to exert pressure on the thickest part of the stock. Instead it pushes on the beveled part which causes it to tilt to the left. The adjustable (screw ) part should be made bigger for this purpose. It is good only for cleaning your rifle. Not good for sighting in your scope. But a good shooting rest, like a Caldwell BR would serve both purposes well. I returned mine.
    Was this review helpful?
    Yes |
    26 found it helpful |
    3 did not
    1 stars
    Steven Graves of Pantego, TX
    Date posted: 4/8/2007
    I purchased this product for the purposes of rifle cleaning and scope mounting. This gun vice is a disappointment on both accounts. When the gun is properly clamped in the vice for cleaning, the muzzle is elevated instead of pointing slightly down. This allows solvents in the barrel to flow back into the action. This is true for rifles with sporter stocks and even worse for varmint style stocks with a wider forend. Surely a company like Tipton that specializes in cleaning equipment is astute enough to know that the muzzle should not be elevated during cleaning. As for scope mounting, I could not find a single rifle that would sit straight in the vice when properly clamped in place. All rifles, regardless of stock style, ended up tilted at an angle. I had hoped that this vice would hold my rifles at a solid vertical to aid in scope alignment. This product does not even come close.
    Was this review helpful?
    Yes |
    65 found it helpful |
    8 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.