L.E. Wilson Chamfer and Deburring Tool

Product #: 789334
| Manufacturer #: CM DEBUR TOOL
Status: Available
   Should Ship Today
Quantity

This deburring tool smooths the inside and outside of the case mouth for easier bullet seating. Universal design works on all cases from 17 up to 45 caliber.

Application Charts & Information

Overall Rating:
5 out of 5
Used this Product?Rate It
5 stars
Vince Stoyanoski of Muskogee, OK
Date posted: 7/12/2008
After several hundred rounds already still sharp. Great tool for the price. Very sharp and has good griping surface.
Was this review helpful?
Yes |
7 found it helpful |
0 did not
5 stars
Steve Langenbeck of Machias, wa
Date posted: 11/2/2006
I've had this tool for a few months, using on .308 Winchester. It works great, stays sharp. My hands get sore when I use it too much, so I guess I'll be adding a motorized attachment, but that's not the fault of the tool.
Was this review helpful?
Yes |
15 found it helpful |
2 did not
5 stars
Mark Moeller of Oceanside, Ca
Date posted: 12/2/2009
Will never use any other chamfer / deburr tool ever again!! bought the possum hollow power adapter you can really blow through A LOT of brass in a hurry with this thing!!
Was this review helpful?
Yes |
2 found it helpful |
0 did not
5 stars
Bob Lund of Boise, ID
Date posted: 4/25/2009
I have one of these that is 20 -30 years old and it still works very well. The sore hand problem was cured by turning an aluminum collar that covers the points. it is about 1/4 inch wide and just covers the points and leaves the front open and gives extra gripping diameter. I left the tool in the freezer while turning the .620 ID, heated the collar and then tapped the tool inside the collar and finished pressing together in my vice.
Was this review helpful?
Yes |
8 found it helpful |
0 did not
Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.
WEBSRVR4