Advanced Technology Strikeforce 6-Position Collapsible Side Folding Stock Set Ruger Mini-14, Mini-30 Standard Barrel Channel Synthetic Black

Product #: 818358
| Manufacturer #: RUG2200
Status: Available
   Should Ship Today
Quantity
Our Price: $94.99Sale!
$109.99You save $15.00!
Sale expires Feb 28, 2010

This glass-filled nylon stock features removable and interchangeable Picatinny-style rails, removable 3/8" cheekrest, non-slip removable rubber buttpad, sling swivel studs as well as a matching pistol grip and forend. This stock requires no gunsmithing.

Interchangeable Rails

  • One 7"
  • Three 2"

Application Charts & Information

Overall Rating:
4.5 out of 5
Used this Product?Rate It
5 stars
Bradley Book of Lewistown, PA
Date posted: 12/10/2008
This stock is great! It fit my Mini-14 Ranch perfectly. I wish they would have made it a long time ago. Fit is tight, but I'd rather have a tight fit than rattle in the stock, right? Everything works smooth. Haven't got to shoot it yet. I can't wait to get on the range and sight in the ATN Ultra Dot.
Was this review helpful?
Yes |
13 found it helpful |
1 did not
5 stars
Craig Smith of Clearwater, FL
Date posted: 1/8/2009
This stock works great! Has a tight fit on the Mini and needed a little Dremel action but I expected that. Much more comfortable to shoot than the original stock and actually improved my groups. Wish I had gotten it sooner.
Was this review helpful?
Yes |
9 found it helpful |
0 did not
5 stars
Gary Heuer of Glen Rock, Pa
Date posted: 10/24/2008
Very well made, fit and especially feel and finish. The composition material is very professional in every way. Excellent.
Was this review helpful?
Yes |
16 found it helpful |
2 did not
5 stars
Richard Hall of Athens, AL
Date posted: 10/16/2008
This stock was relatively easy to install on my Mini-14. Fit was excellent and the options and adjustability make this a great stock to turn your Mini-14 into a great tactical rifle.
Was this review helpful?
Yes |
16 found it helpful |
2 did not
5 stars
John R of Sacramento area, ca
Date posted: 10/19/2008
Works great for the mini 30. Easy install and a few minutes with the Dremel to open the mag area some to accept the mini 30 mags. Works great for me.
Was this review helpful?
Yes |
10 found it helpful |
4 did not
5 stars
David Thomas of Walterboro, SC
Date posted: 12/11/2009
Long story short, my (BRAND NEW IN BOX) Mini-30 was stolen. When it was recovered a few months later it looked pretty beaten up. So I came on here looking for a stock and found this. It fit right on, except for the mag area, as the Mini-30s are larger down there for the larger mags. 20 minutes with a file and some sand paper and I was done. With this and my 30rd polymer ProMags my Mini-30 is so much fun to shoot and is pretty cool looking.
Was this review helpful?
Yes |
4 found it helpful |
1 did not
5 stars
Mario Salazar of Miami, FL
Date posted: 1/22/2009
I have just installed and have to say it exceeded my expectations. It fit in my 580 series Mini is tight-but-right. I think it has the "right amount of tightness" without causing any mounting problems. Finish is also excellent and it looks awesome. I will try to rate it again when I get to try it on the range and on the woods.
Was this review helpful?
Yes |
6 found it helpful |
0 did not
4 stars
Matthew Rynard of Pompono Beach , Fl
Date posted: 3/1/2009
Stock is very nice. Seems to be very tight. Naturally, must be fit to my 30 (mag well fitting) but otherwise a very good fit. A couple of the screws were pre-stripped, fixed with LocTite blue. I do not own a Dremel Moto tool but a narrow rough cut file works fine. Be sure to not over-tighten screws, LocTite instead. Anxious to mount Aimpoint & go blasting.. Very nice product!
Was this review helpful?
Yes |
5 found it helpful |
0 did not
3 stars
Jeff Dunn of West Jordan, UT
Date posted: 2/5/2009
Great product for right handed shooters. Does not work well for left handed shooters as I am.
Was this review helpful?
Yes |
8 found it helpful |
0 did not
3 stars
Michael Cummings of Dover, NH
Date posted: 2/2/2009
I also own this stock, and while the rifle fits snugly into the housing. The collapsible butt piece is pretty loose and moves around quite a bit (or rotates back and forth), poor design if you ask me. ATI keeps telling me they will replace it but this is going back to mid December and no return label as yet.
Was this review helpful?
Yes |
9 found it helpful |
2 did not
Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.
WEBSRVR5