Lee Deluxe Carbide 4-Die Set 9mm Luger

Product #: 885350
| Manufacturer #: 90963
Status: Available
   Should Ship Next Business Day
Quantity

The Lee Deluxe Handgun 4-Die set includes a carbide full length sizing die with decapping unit, carbide powder through expanding die, for expanding and belling the case mouth while charging the case with powder, a carbide bullet seating die, and Lee's exclusive carbide Factory Crimp Die. The carbide Factory Crimp Die checks the size of the case, ensuring that every round will chamber properly in your gun. The deluxe 4-Die set also comes packaged with the appropriate shellholder, powder dipper, load data sheet and flat 4-die plastic container. Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies

Application Charts & Information

Overall Rating:
4.7 out of 5
Used this Product?Rate It
5 stars
brad bolding of va beach, va
Date posted: 11/24/2005
great dies. i also like how they give you a shell holder and a chart with many different loads. A+
Was this review helpful?
Yes |
19 found it helpful |
2 did not
5 stars
Jordan Flagstad of East Bethel, MN
Date posted: 3/5/2006
I'm not sure what happened on my other review, but I definitely meant for this products to have 5 stars. Great product!!
Was this review helpful?
Yes |
7 found it helpful |
4 did not
5 stars
Peter Sheehan of Du bois, PA
Date posted: 4/4/2006
Excellent product, well made, good value, produces great ammo.
Was this review helpful?
Yes |
8 found it helpful |
4 did not
5 stars
Greg Pate of Townsend, TN
Date posted: 11/15/2005
I got a new Kahr 9mm auto pistol and used this die set to load for it. Initially, I was skeptical with my set due to low price. But after loading a few thousand rounds of nice, accurate ammo on my RCBS turret press and trouble free performance, I am now a true believer of Lee pistol dies. The unit is easy on the budget, easy to set-up and adjust and comes with a free shell holder! I guess I have to say I am truly satisfied with this well made durable product!!
Was this review helpful?
Yes |
31 found it helpful |
3 did not
5 stars
Lance Dickison of Chouteau, OK
Date posted: 4/30/2003
If you load with anything but Lee dies, you're throwing your money away. I speak from experience because I've owned nearly every manufacturer's dies known and I'm here to tell you the Lee's are more simple to use and consistently as accurate as anything costing 5 or six times as much. Don't be fooled; these guys make a top flight product at a very reasonable price. If you want a real rush, try their Collet rifle dies; you won't believe what they will do for your pet rifle with a little careful test loading.
Was this review helpful?
Yes |
57 found it helpful |
2 did not
5 stars
Thomas Matos of Wynne, AR
Date posted: 5/14/2004
Set it and forget it. As a police officer I go through plenty of ammo. All my buds comment on my ammo. The lee carbide dies are a no brainer. The factory crimp is by far the most useful. When you get the crimp just right you can optimize the start pressure necessary for a uniform and complete powder burn effectively causing almost no muzzle flash. Once you get the powder charge and the crimp just right, its simply amazing. .223 ammo is next.
Was this review helpful?
Yes |
39 found it helpful |
1 did not
5 stars
Erik Dyal of Newberg, OR
Date posted: 6/1/2005
Excellent dies. Worth every penny!
Was this review helpful?
Yes |
16 found it helpful |
7 did not
5 stars
L. Hypes of Martinsville, Va
Date posted: 12/18/2009
I have been reloading since 1969 and have used just about everything out there and some that’s not even around any more. When Lee came on the market, a lot of the manufactures were way out of line in price compared to Lee. I still have the others but after the first set of Lee dies, I have used them almost exclusively. They make a good product that does what it says it will and the factory support is nothing short of fantastic. You won't regret using Lee products. Use the extra money for powder etc. 1st class.
Was this review helpful?
Yes |
5 found it helpful |
0 did not
5 stars
Bill Clancy of Monterey, CA
Date posted: 1/27/2010
Load in a Dillon 550B...screw in from the bottom so they fit. Keep the Dillon powder drop die. I've reloaded untold thousands of 9mm with little or no trouble.
Was this review helpful?
Yes |
2 found it helpful |
0 did not
5 stars
Larry Neal of Londonderry, NH
Date posted: 6/9/2002
Like all my friends, I bought the Lee 9mm dies with factory crimp dies. I've used them for about 10,000 rounds for regular shooting with my friends. The dies are just great. I've never had a misfire or accuracy problems. Since I was able to adjust loads, I've found my pet load for this cartridge which is really accurate. If you've got a limited budget, the Lee is the best choice. The bonus is that it's as good as any out there.
Was this review helpful?
Yes |
93 found it helpful |
4 did not
5 stars
ARIC WALDRON of Leonard, TX
Date posted: 8/7/2009
I have almost 1000 rounds of 9mm Luger through my RCBS progressive press and have had no problems. A great value.
Was this review helpful?
Yes |
7 found it helpful |
0 did not
5 stars
Edward Tedder of Friendsville, TN
Date posted: 3/12/2007
Lee dies load without a hitch. I never consider buying another brand due to past experiences and price.
Was this review helpful?
Yes |
13 found it helpful |
1 did not
4 stars
Jason B of Anthem, AZ
Date posted: 7/21/2008
I bought these for use in my Dillon RL 550B progressive press. They didn't work so well since the mouth of the dies aren't tapered. I had to return them and get some dies made for a progressive reloading press. These seemed to be of good quality otherwise, hence the 4-star rating. If I had a single stage press, I wouldn't hesitate to buy them.
Was this review helpful?
Yes |
11 found it helpful |
6 did not
4 stars
Dan Yingling of Cape Girardaeu, MO
Date posted: 2/7/2010
This is the first die set I've ever used as I'm new to reloading. They set up easily and worked great. The only reason they lost a star is because the lock rings are worthless, I've ordered the Lyman lock rings to replace them.
Was this review helpful?
Yes |
0 found it helpful |
0 did not
4 stars
William Stagg of Lafayette, LA
Date posted: 4/9/2005
Die sets work very well and are fairly easy to set up and use. Factory Crimp die insures tight crimp. Great price. I use them on a Lee Turret Press. The only problem is that the seating depth may vary requiring frequent checking and die readjustment. The seating die does not seem to hold its setting. This can slow down production.
Was this review helpful?
Yes |
29 found it helpful |
5 did not
3 stars
JOHN BEHLING of CAPE CORAL, FL
Date posted: 5/16/2009
Overall, this is a great set of dies. The one problem I have had is with the case mouth expander die. 1/8 of a turn on the adjustment takes it from no flare at all to something resembling a funnel. Since I am loading cast bullets, I need a little flare to avoid damaging the bullets going in. The factory crimp die does a fine job of putting the neck back where it belongs, but I'd like a little more control over the degree of flare. If not for that, 5 stars it would be.
Was this review helpful?
Yes |
6 found it helpful |
3 did not
Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
NOTE: Prices, specifications and availability are subject to change without notice.
We reserve the right to correct typographic, photographic and/or descriptive errors.
WEBSRVR4