You are here: Homepage > Gun Parts > Shop by Gun Make & Model > Ruger > Ruger 10/22 > Stocks > 

Mounting Solutions Plus Muzzlelite Bullpup Stock Ruger 10/22 Synthetic Black

Product #: 888872
| Manufacturer #: MZ-1022
Status: Available
   Should Ship Today
Quantity

Turn heads the next time you go to the range with this unique bullpup rifle stock. The stock is constructed of fiberglass reinforced plastic, and will instantly enhance the mobility your Ruger 10/22 or Mini-14 by trimming the length to a compact 26-1/2". It features an elevation adjustable front sight, windage adjustable rear sight and a scope rail that attaches to the handle. May not work with certain, curved high capacity magazines.

Technical Information

Notes:

  • Overall length is 26 1/2"
  • Includes mounted fixed sights that are adjustable for windage and elevation(windage controlled by rear sight and elevation by front sight)
  • Includes scope mount that attaches in the handle
  • Fiberglass reinforced plastic
  • Allen wrench included

    Warnings from manufacturer
  • Bullpup stocks cannot be fired in a left handed position and are therefore only suitable for right handed shooters
  • Some high capacity magazines may not clear the pistol grip

    • Application Charts & Information

    Overall Rating:
    3.1 out of 5
    Used this Product?Rate It
    5 stars
    Jon Percival of Rock hill, SC
    Date posted: 1/8/2009
    Easy and fun plinker!! I've had no problems, and didn't have to remove material, etc. It is just plastic, but fun! Definitely worth it...
    Was this review helpful?
    Yes |
    5 found it helpful |
    1 did not
    5 stars
    Robert Firestone of Bourbon, IN
    Date posted: 3/16/2008
    I have ordered two of these stocks and I love them. No they aren't of the highest quality but they shoot well and really dress up a 10/22. Installation was easy and straight forward. The weaver rail that is included worked well with the holographic sight I installed. This stock makes for a fun day of plinking. Well worth the money.
    Was this review helpful?
    Yes |
    13 found it helpful |
    1 did not
    5 stars
    Lee Rogers of Winnemucca, nv
    Date posted: 11/7/2007
    Bought 1 for my 10-22, and 1 for my Mini-14. Really did'nt find any problems with the stocks, except the curved mags for the 10-22. Put a red dot on the 22. perfect for jack rabbits. With the muzzle brake it's just pop..pop..pop. both are lots of fun...2 thumbs up
    Was this review helpful?
    Yes |
    20 found it helpful |
    0 did not
    5 stars
    M M of Manassas, VA
    Date posted: 11/26/2006
    Installation was quick and easy with no problems. Unit functions flawlessly. No problems using high-capacity magazines. I added a red dot sight to top off the package.
    Was this review helpful?
    Yes |
    44 found it helpful |
    6 did not
    4 stars
    Bruce Copeland of Roseburg, OR
    Date posted: 8/14/2008
    This is my first bullpup configuration. Thanks to previous comments, I was prepared to do a little work to get everything to fit properly. There are a few small gaps where the two sides don't mate, but that's easily fixable. Overall, I'm in love with the look and feel. I can't wait to get out on the range and do some serious plinking.
    Was this review helpful?
    Yes |
    10 found it helpful |
    1 did not
    4 stars
    Ryan Reaves of Norman, OK
    Date posted: 4/8/2007
    Overall, this is a fun little item. It's more for plinking and not serious shooting, but everyone on the range will ask you where you got it. I did have some problems with Hi-cap magazines (I was using Ram-Line 30 rd. mags)
    Was this review helpful?
    Yes |
    30 found it helpful |
    1 did not
    2 stars
    Donnavon Smith of Queen creek, AZ
    Date posted: 12/31/2006
    Action and barrel fit perfectly. Looks kinda cool after a little rework. Rework = removing material from trigger area so that the trigger would reset, removing casting flash and shaving so the two halves mated flush (front site still not flush). Nice toy, not real practical, I recommend an extended charging handle for this stock
    Was this review helpful?
    Yes |
    35 found it helpful |
    4 did not
    1 stars
    Todd Girkins of Morrison, CO
    Date posted: 5/4/2009
    Relatively easy to install, otherwise it would get zero stars. Once installed, I never knew if the trigger mechanism would work and I would get a shot off, or if it would bind and the gun would not fire. Just like it sounds, that is totally unacceptable. Needless to say, it was returned.
    Was this review helpful?
    Yes |
    7 found it helpful |
    3 did not
    1 stars
    John of Charlottesville, VA
    Date posted: 1/23/2009
    I have to agree with the first reviewer. Quality is very poor and construction is cheap plastic - I consider this equivalent to a cheap "toy." The 10/22 stock conversions by Nordic Components and R. B. Precision are the best available and the additional price is well worth it.
    Was this review helpful?
    Yes |
    5 found it helpful |
    2 did not
    1 stars
    Sean Ulibarri of Lafayette, CO
    Date posted: 4/20/2009
    I just purchased this stock and must say I'm very unhappy with the build quality, and the fit and finish. The trigger pull is absolutely horrible if you can even get the first round to fire. Yes, it binds that bad! Once assembled the whole stock flexes and is not a solid piece. This product would be better geared towards air-soft pellet toy guns. Save your money and the huge disappointment. I will try the butler stock next, hopefully it will have better build quality.
    Was this review helpful?
    Yes |
    6 found it helpful |
    1 did not
    1 stars
    Patrick Hall of Upland, CA
    Date posted: 4/20/2007
    This had a very "toy" feel to it and not high quality at all. Mine was thrown in the box with no protective material and bolts and washers was freely rolling around. The quality of the stock was the main turn off and the picture really is much better than the product you'll receive. I couldn't send it back to Midway fast enough for a refund. I'd place a value of $25 or less on it, because there isn't much to it and zero attention to detail on the finish. My kids toys are better made.
    Was this review helpful?
    Yes |
    72 found it helpful |
    16 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    WEBSRVR5