Lyman Turbo Brass Cleaning Media Treated Tufnut (Walnut) 12 lb Box

Product #: 932300
| Manufacturer #: 7631333
Status: Available
   Should Ship Today
Quantity

Lyman Turbo Case Cleaning Media is a great choice for cleaning tarnished cases. A few hours in a tumbler and cases are clean, polished and ready to load.

Technical Information

Notes:

  • Treated Rouge Bearing Nutshell Media
  • Approximately 12 Pounds

    • Application Charts & Information

    Overall Rating:
    4 out of 5
    Used this Product?Rate It
    5 stars
    ammon fox of tooele, ut
    Date posted: 1/8/2009
    This product is by far the best tumbling media ever! The red dust is an easy fix, just add brass polish the first few times you tumble. Then just use some rubbing alcohol after that and all the residue sticks to the media.
    Was this review helpful?
    Yes |
    13 found it helpful |
    0 did not
    5 stars
    Jeff Bryson of Orlando, FL
    Date posted: 11/22/2009
    Everyone at the range asks how I get my brass so shiny. I am cleaning mostly pistol brass with carbide dies. I have not had any problems with build up in the dies. There is a residue left on the brass but it seems to help with the sizing.
    Was this review helpful?
    Yes |
    0 found it helpful |
    0 did not
    5 stars
    Richard Windisch of Indianapolis, IN
    Date posted: 1/31/2004
    I've used a variety of media over the last 25 years, but this does the best job of any. Some people don't care for the red dust, but it doesn't stain and it cleans the brass very bright, very quickly.
    Was this review helpful?
    Yes |
    51 found it helpful |
    0 did not
    4 stars
    Charles Tyler of Union grove, WI
    Date posted: 6/10/2006
    This product works well unless you object to the red dust it leaves on everything. With most rifle bullets I clean the cases in the vibrator before resizing to extend the life of the dies. The red dust must be removed before the cases are lubed. If it is not, the red dust turns into a red paste that clogs the dies.
    Was this review helpful?
    Yes |
    36 found it helpful |
    0 did not
    1 stars
    Larry Murphy of Calamus, IA
    Date posted: 2/11/2010
    While this product will clean brass fairly well it is terrible for sticking in flash holes. I used bird bedding crushed walnut and it seldom sticks in the flash hole. It takes some polish additive to get a good polish on the cases using this but it is better by a long shot. Cleaning flash holes is no fun and a plugged hole can cause a squib or dud round.
    Was this review helpful?
    Yes |
    0 found it helpful |
    0 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    WEBSRVR9