You are here: Homepage > Optics > Rifle Scopes > Rimfire Rifle Scopes > 

Pride Fowler Rapid Reticle Rimfire Rifle Scope 6x 40mm .22 Long Rifle 2nd Plane Rapid Reticle Matte

Product #: 821091
| Manufacturer #: RR22LRHV6x40-2
   _
Our Price: $255.00
Not available

The Pride Fowler Rapid Reticle Scope was designed by world champion shooters with hunters and sport shooters in mind. Each Rapid Reticle scope is calibrated for a specific caliber and the company recommends the appropriate ammunition, takes the guess work out of hold over and windage. Range and windage marks are clearly visible without taking away from the full picture. Handgun scopes are built to withstand the recoil of magnum cartridges with extended eye relief. All scopes feature light-weight, aluminum construction, 1/4 MOA adjustments and multi-coated lens for outstanding durability and quality. Fogproof, waterproof and shockproof and include scope caps and a limited lifetime warranty.

Technical Information

Tube Diameter: 1"
Objective Bell Diameter: mm
Ocular Bell Diameter: mm

Adjustment Click Value: 1/4"
Eye Relief: 4.5"
Exit Pupil Diameter: not listed by manufacturer

Field of View at 100 Yards:

  • 17? @ 6x

    Dimensions, in inches unless otherwise stated:
  • A: 12 5/8"
  • B: not listed by manufacturer
  • C: not listed by manufacturer
  • D: not listed by manufacturer
  • E: not listed by manufacturer
  • F: not listed by manufacturer
  • G: not listed by manufacturer
  • H: not listed by manufacturer
    Weight: 12 oz

    Accessories:
  • Plastic protective lens covers

    Warranty Information:
  • Limited lifetime

    Notes:
  • Waterproof, fogproof, shockproof

    • Attention!
    MidwayUSA welcomes returns, for credit or refund, of product in new, unaltered condition. Please understand that we cannot accept returns on Scopes or Red Dot Sights that have been mounted unless you find they are defective.

    Application Charts & Information

    Overall Rating:
    4 out of 5
    Used this Product?Rate It
    4 stars
    Cliff Carter of Carlisle, PA
    Date posted: 3/7/2008
    This is a good scope and robust enough for its intended application. The image was of good quality and clear to the edges of the viewing area. There are several clearly marked holdover points on the reticle for various yardages. These holdover points make it unnecessary to “dial in” for different ranges. Just put the appropriate aiming point for the yardage you are shooting on your target and pull the trigger. Finish was also satisfactory.
    Was this review helpful?
    Yes |
    26 found it helpful |
    3 did not
    Have a question? Visit GunTec Dictionary Need a gunsmith? Visit Gunsmith Locator
    NOTE: Prices, specifications and availability are subject to change without notice.
    We reserve the right to correct typographic, photographic and/or descriptive errors.
    WEBSRVR13