9 Hole Reviews Favorite Products

Trust The Gold Standard In Weapon Lights. Popular with law enforcement and military operators around the world, the best-selling Weapon Light now delivers a stunning 1,000 lumens of LED-generated output. Focused by a precision TIR lens, it creates a far-reaching high-intensity beam with a larger center spot plus surrounding spill light ideal for close- to medium-range engagements. You can count on the X300U to help you positively identify threats at significant distances while temporarily impairing your adversary's vision. It also provides extensive peripheral illumination for maintaining situational awareness. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and sealed to make it weatherproof. It's also IPX7 waterproof to 1 meter for 30 minutes. The X300U delivers a standard of excellence you can trust.

Features

• High-performance LED is regulated to maximize tactical-level output and runtime per set of batteries
• TIR lens creates focused high-intensity beam for close- to longer-range applications
• Integral aluminum T-slot mounting system offers rock-solid attachment to railed hand guns and long guns equipped with MIL-STD 1913 rails
• Weatherproof - O-ring and gasket sealed
• Construction - High-strength aerospace aluminum with Mil-Spec anodizing; coated, tempered window

The Arisaka Defense Offset Scout Flashlight Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20" thick. When used on the side mounting surfaces of M-Lok handguards, the Offset Scout Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions. Requires an IP20/T20 Torx driver for installation (not included).

Features

• Three lateral mounting positions
• Compatible with most M-LOK handguards
• Includes necessary screws to attach light body to mount
• Requires an IP20/T20 Torx driver for installation (not included)
• Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.

Note: The Arisaka Defense Offset Scout Flashlight Mount will not fit Aero Precision Enhanced Gen 2, SIG MPX, or MCX Virtus handguards

If there is such a thing as a “professional” riflescope, it is an ATACR. They are designed for military, law enforcement, hunters, and other tactical professionals… and for those who simply want to shoot like a professional. An ATACR riflescope is the combination of the finest materials, engineering expertise, mechanical reliability and optical performance available today. Simply put, there is no expense spared, no detail overlooked in building a Nightforce ATACR. They are the basis for Nightforce's Mil-Spec riflescopes, currently in use by several branches of the U.S. Military and allies around the world. All ATACR riflescopes feature ED glass, which produces brilliant images, superb color contrast, and exceptional resolving power–allowing you to distinguish the smallest targets at extreme distances. Nightforce's higher-power ATACR riflescopes, designed for extreme long-range precision, meet or exceed the capability of any known rifle cartridge.

Features:

• Cleaning Fob/ Cleaning Cloth
• Multi-Tool
• Owner's manual
• Digillum technology allows you to select the reticle color to either green or red in 5 different intensities
• Illumination will auto shut off after one hour of no use

The PRI Mark 12 Mod 0 SPR Gen II Upper Receiver Assembly is a ready to shoot 5.56 upper, equipped with a 18" Douglas 416 stainless steel barrel with a fitted bolt, and commercial bolt carrier. The Mark 12 Mod 0 SPR has a flat-top picatinny receiver, PRI flip up front gas block, front sight with thumb screw elevation adjustment, rear sight, and rifle length gas tube. It also comes with a Gas Buster charging handle with a big latch and AE Muzzle Brake with collar. The Mark 12 Mod 0 SPR Gen II comes equipped with a rifle length carbon fiber free float forearm in either black or flat dark earth finish.

Features

• Forged Upper Receiver T6 7075 Hard coat anodized aluminum
• Douglas 416 stainless steel 18" Barrel with M4 feed ramps
• Flip up front sight gas block with 2 cross bolts for securing
• Rifle Length Forearm with Black or FDE Finish
• SPR Straight Fully Length Picatinny Top Rail
• Rear Sight designed for the gas block
• 1/2"x28 Thread with AE Muzzle Brake and Collar
• Overall Length of 27"
• Only 5.2 Pounds 

Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua's exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.