Weaver 88-Piece Deluxe Gunsmithing Hammer, Punch and Screwdriver Tool Kit

  • Product #: 143527
  • Weaver #: 849719
  • UPC #: 076683897190
{{::selector.productBannerAlt}}
Weaver 88-Piece Deluxe Gunsmithing Hammer, Punch and Screwdriver Tool Kit
  1. {{::image.alternatText}}
X
$79.99
MSRP: $102.45
Available
Ships tomorrow from MidwayUSA

Product Overview

The Weaver Deluxe Tool Kit offers nearly every bit needed for your amateur or professional gunsmithing needs. The Weaver Deluxe Tool Kit includes 88 pieces and comes neatly packaged in a durable storage case.

Kit Includes:

  • 54 Flat Bits
  • 3 Phillips Bits
  • 4 Torx Bits
  • 8 Hex Bits
  • 3 Specialty Bits
  • 1 Hex Drill Bit Adapter
  • 1 Hex Bit Square Adapter
  • 2 Extended Length Bits
  • 1 Magnetic Bit Driver
  • 9 Punches
  • 1 Double Faced Hammer (brass and nylon)
  • 1 Bench Block


Was this information helpful?

Specifications

Delivery Information

Must Ship to FFL Dealer Yes
Shipping Weight {{selector.shippingWeightDisplay()}}
Ships Alone Yes
Oversized Yes
DOT- Regulated Yes
Carrier Restrictions
  • Cannot ship via air
  • Cannot ship via USPS
  • Cannot ship to PO Box
  • Must ship to Contiguous US
HazMat Product Yes

Videos

Playlist

  • Gunsmithing - Repairing the Stock on a Remington Model 11 Shotgun
    Gunsmithing - Repairing the Stock on a Remington Model 11 Shotgun
  • GunTec - Converting a Winchester Model 21 Side by Side Shotgun from Pistol Grip to Straight Grip
    GunTec - Converting a Winchester Model 21 Side by Side Shotgun from Pistol Grip to Straight Grip
  • GunTec - Correcting Excess Cylinder Endshake
    GunTec - Correcting Excess Cylinder Endshake
  • GunTec - Field Strip a Remington Rolling Block Rifle
    GunTec - Field Strip a Remington Rolling Block Rifle
  • GunTec - How a Rolling Block Operates - The Cycle of Operation
    GunTec - How a Rolling Block Operates - The Cycle of Operation
  • GunTec - How to Build an AR-15 Lower Receiver
    GunTec - How to Build an AR-15 Lower Receiver
  • GunTec - How to Clean a Revolver
    GunTec - How to Clean a Revolver
  • GunTec - How to Clean Years of Dirt and Grime from a Remington Rolling Block
    GunTec - How to Clean Years of Dirt and Grime from a Remington Rolling Block
  • GunTec - How to Complete a Rolling Block Trigger Job
    GunTec - How to Complete a Rolling Block Trigger Job
  • GunTec - How to Convert a Rolling Block from 32 Rimfire to 32-20 Winchester Centerfire
    GunTec - How to Convert a Rolling Block from 32 Rimfire to 32-20 Winchester Centerfire
  • GunTec - How to Fix a Stripped Wood Screw in a Gun Stock
    GunTec - How to Fix a Stripped Wood Screw in a Gun Stock
  • GunTec - How to Inlet a Two-Screw Swivel Stud
    GunTec - How to Inlet a Two-Screw Swivel Stud
  • GunTec - How to Make a New Mainspring for a Ballard Rifle
    GunTec - How to Make a New Mainspring for a Ballard Rifle
  • GunTec - How to Make and Install a Leather Covered Recoil Pad
    GunTec - How to Make and Install a Leather Covered Recoil Pad
  • GunTec - How to Properly Mount a Scope
    GunTec - How to Properly Mount a Scope
  • GunTec - How to Relay a Rib on a Remington 1900 Side by Side Shotgun
    GunTec - How to Relay a Rib on a Remington 1900 Side by Side Shotgun
  • GunTec - How to Reline a 22 Rimfire Rifle Barrel
    GunTec - How to Reline a 22 Rimfire Rifle Barrel
  • GunTec - How to Repair the Firing Pin on an 1869 Sharps Rifle
    GunTec - How to Repair the Firing Pin on an 1869 Sharps Rifle
  • GunTec - How to Repair the Tumbler and Sear on an Axtell 1877 Sharps Rifle
    GunTec - How to Repair the Tumbler and Sear on an Axtell 1877 Sharps Rifle
  • GunTec - How to Tighten the Barrel and Make a New Magazine Plug for a Winchester Model 12
    GunTec - How to Tighten the Barrel and Make a New Magazine Plug for a Winchester Model 12
  • GunTec - How to Use Wax to Protect Your Firearms
    GunTec - How to Use Wax to Protect Your Firearms
  • GunTec - Installing Precision Sights on a Winchester 1885
    GunTec - Installing Precision Sights on a Winchester 1885
  • GunTec - Re-Assembly & Presentation of the Antique Parker Shotgun
    GunTec - Re-Assembly & Presentation of the Antique Parker Shotgun
  • GunTec - Repairing a Remington 1900 Double Barrel Shotgun
    GunTec - Repairing a Remington 1900 Double Barrel Shotgun
  • GunTec - Repairing Slow Timed S&W Revolvers
    GunTec - Repairing Slow Timed S&W Revolvers
  • GunTec - The Winchester Model 12 Cutaway and Cycle of Operation
    GunTec - The Winchester Model 12 Cutaway and Cycle of Operation

Customer Reviews

Product Reviews are not compatible with your browser.

Update Your Browser Now!
NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.