Wheeler Engineering 72-Piece Professional Gunsmithing Screwdriver Set

  • Product #: 223597
  • Wheeler Engineering #: 776737
  • UPC #: 661120767374
{{::selector.productBannerAlt}}
Wheeler Engineering 72-Piece Professional Gunsmithing Screwdriver Set
  1. {{::image.alternatText}}
X
Sale
$49.49
Regular Price: $59.99 Save $10.50 (17%)
Available
Ships tomorrow from MidwayUSA
Questions? Let us help! Chat Now

Product Overview

The durable bits found in this screwdriver set are made from high-grade tool steel hardened to 56-58 Rockwell C. A custom-molded box houses the contents of the set which includes:

Kit Includes:

  • 2 ergonomic driver handles for delivering maximum torque
  • 54 hollow ground bits specifically designed to match the thin slots in gun screws, sizes ranging from approximately .120 x .020 to .360 x .070
  • 8 Allen bits (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16)
  • 4 Phillips bits (#0, #1, #2, #3)
  • 3 Torx bits (T10, T15, T20)
  • Includes two each of the very thinnest bits in this set, this is intentional as the thinnest are most likely to break

 

Notes:
The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be considered a defect, rather it means that the fastener will require some other means of removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil.

Was this information helpful?

Specifications

Product Information

{{attribute.name}} {{attribute.value[0]}} {{attribute.value}}

No {{attribute.name}}s match your search.

  • {{values}}
Compatible With
{{compatibleWithAttribute.name}} {{compatibleWithAttribute.values[0]}}
  1. {{value}}

Delivery Information

Must Ship to FFL Dealer Yes
Shipping Weight {{selector.shippingWeightDisplay()}}
Ships Alone Yes
Oversized Yes
DOT- Regulated Yes
Carrier Restrictions
  • Cannot ship via air
  • Cannot ship via USPS
  • Cannot ship to PO Box
  • Must ship to Contiguous US
HazMat Product Yes

Videos

Playlist

  • Gunsmithing - Repairing the Stock on a Remington Model 11 Shotgun
    Gunsmithing - Repairing the Stock on a Remington Model 11 Shotgun
  • GunTec - Converting a Winchester Model 21 Side by Side Shotgun from Pistol Grip to Straight Grip
    GunTec - Converting a Winchester Model 21 Side by Side Shotgun from Pistol Grip to Straight Grip
  • GunTec - Correcting Excess Cylinder Endshake
    GunTec - Correcting Excess Cylinder Endshake
  • GunTec - Field Strip a Remington Rolling Block Rifle
    GunTec - Field Strip a Remington Rolling Block Rifle
  • GunTec - How a Rolling Block Operates - The Cycle of Operation
    GunTec - How a Rolling Block Operates - The Cycle of Operation
  • GunTec - How to Build an AR-15 Lower Receiver
    GunTec - How to Build an AR-15 Lower Receiver
  • GunTec - How to Clean a Revolver
    GunTec - How to Clean a Revolver
  • GunTec - How to Clean Years of Dirt and Grime from a Remington Rolling Block
    GunTec - How to Clean Years of Dirt and Grime from a Remington Rolling Block
  • GunTec - How to Complete a Rolling Block Trigger Job
    GunTec - How to Complete a Rolling Block Trigger Job
  • GunTec - How to Convert a Rolling Block from 32 Rimfire to 32-20 Winchester Centerfire
    GunTec - How to Convert a Rolling Block from 32 Rimfire to 32-20 Winchester Centerfire
  • GunTec - How to Fix a Stripped Wood Screw in a Gun Stock
    GunTec - How to Fix a Stripped Wood Screw in a Gun Stock
  • GunTec - How to Inlet a Two-Screw Swivel Stud
    GunTec - How to Inlet a Two-Screw Swivel Stud
  • GunTec - How to Make a New Mainspring for a Ballard Rifle
    GunTec - How to Make a New Mainspring for a Ballard Rifle
  • GunTec - How to Make and Install a Leather Covered Recoil Pad
    GunTec - How to Make and Install a Leather Covered Recoil Pad
  • GunTec - How to Properly Mount a Scope
    GunTec - How to Properly Mount a Scope
  • GunTec - How to Relay a Rib on a Remington 1900 Side by Side Shotgun
    GunTec - How to Relay a Rib on a Remington 1900 Side by Side Shotgun
  • GunTec - How to Reline a 22 Rimfire Rifle Barrel
    GunTec - How to Reline a 22 Rimfire Rifle Barrel
  • GunTec - How to Repair the Firing Pin on an 1869 Sharps Rifle
    GunTec - How to Repair the Firing Pin on an 1869 Sharps Rifle
  • GunTec - How to Repair the Tumbler and Sear on an Axtell 1877 Sharps Rifle
    GunTec - How to Repair the Tumbler and Sear on an Axtell 1877 Sharps Rifle
  • GunTec - How to Tighten the Barrel and Make a New Magazine Plug for a Winchester Model 12
    GunTec - How to Tighten the Barrel and Make a New Magazine Plug for a Winchester Model 12
  • GunTec - How to Use Wax to Protect Your Firearms
    GunTec - How to Use Wax to Protect Your Firearms
  • GunTec - Installing Precision Sights on a Winchester 1885
    GunTec - Installing Precision Sights on a Winchester 1885
  • GunTec - Re-Assembly & Presentation of the Antique Parker Shotgun
    GunTec - Re-Assembly & Presentation of the Antique Parker Shotgun
  • GunTec - Repairing a Remington 1900 Double Barrel Shotgun
    GunTec - Repairing a Remington 1900 Double Barrel Shotgun
  • GunTec - Repairing Slow Timed S&W Revolvers
    GunTec - Repairing Slow Timed S&W Revolvers
  • GunTec - The Winchester Model 12 Cutaway and Cycle of Operation
    GunTec - The Winchester Model 12 Cutaway and Cycle of Operation

Customer Reviews

Product Reviews are not compatible with your browser.

Update Your Browser Now!
NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.