Glow Ammo Trajectory Identification Kit's are a revolutionary product designed to give shooters ammunition that will track their trajectory. Glow Ammo is not loaded ammunition and does not have the issues of traditional tracers. Glow ammo causes no excess stress to firearms, emits no heat, does not lose mass downrange, maintains the ballistic integrity of the round and only weighs 1 grain. Traditional tracers are not accurate
Traditional tracers cause excessive barrel heat
Traditional tracers leave residue in firearms
Traditional tracers can cause unintended fires
Traditional tracers can't be used at most indoor and outdoor ranges
All bullets must be cleaned and dried before attaching Glow Ammo, Failure to do so will result in poor performance
For best results, use copper jacketed bullets
Glow Ammo recommends using faster burning powders such as Alliant Bullseye
Glow Ammo Identifiers are sized a few thousandths under the bullet diameter of the bullet they are designed to fit.
Glow Ammo is not loaded ammunition, the identifiers must be applied to the base of the bullet before ammunition is reloaded.
Glow Ammo works best in low light conditions (Indoor ranges, Outside from dusk to dawn, It does not work in broad daylight).
PEEL an Identifier off the sheet provided in your Trajectory Identification Kit.
POSITION the Identifier on the center of the base of the bullet. (Picture on back of box)
PRESS the Identifier firmly onto the bullet.