- 3 ways to charge; solar, wall outlet or car 12V adapter
- 3 ways to power devices; USB, 12V, AC inverter
- Perfect for emergency preparedness
The epitome of unlimited, portable backup power for complete peace of mind. From phones to refrigerators, and everything in between, with the Goal Zero Yeti 1250 Solar Generator, you have the power to back up your life in any situation. Ditch the noise, fumes and gasoline and enjoy unlimited power from the wall or the sun
When charging gear with the Yeti 1250, take note of the LCD Battery Display. If you plug in devices that have a high power requirement (a large refrigerator), the charge level of the Yeti can drop very quickly and you may not get exactly 1250Wh of power. On the flipside, if you're recharging devices that draw power more slowly (a small TV), you will get closer to 1250Wh. If you're experiencing shorter run times, you make want to check the device's power requirements.
Cold temperatures (below freezing) can impact the Yeti's battery capactiy. If you'll be living off-grid in sub-zero conditions, we recommend keeping your Yeti 1250 in an insulated cooler, and connected to a power source (solar panels). The natural heat generated by the Yeti 1250 contained in an insulated cooler will keep battery capacity at its highest.
Having your Yeti 1250 connected to a power source, like a solar panel or wall outlet, between adventures or while in storage keeps its battery healthy and topped off. This prolongs battery life and will ensure your Yeti 1250 is charged and ready to go all day, every day. If you can't keep the Yeti 1240 plugged into a power source during storage, fully charge your Yeti 1250 every 3 months and store in a cool, dry place. Failure to maintain the Yeti 1250 by following these steps can result in battery damage which will void the product warranty.
Looking for more power from your Yeti 1250? You can extend the run time of your Yeti 1250 by connecting it to additional 12V, 100Ah batteries. The connector on the back of the Yeti 1250 is an Anderson Power SB175. Connect only 100Ah, 12V lead-acid batteries (or similar, 175Ah Max) batteries to the Yeti 1250. When additional batteries are chained to the Yeti 1250, you will experience increased charge times - this is a result of having to charge up the chained batteries in addition to the Yeti 1250.
What the Yeti 1250 Charges:
Headlamp- 300+ charges
Smartphone- 100+ charges
GoPro- 200+ charges
Digital Camera- 100+ charges
Tablet- 45+ charges
Laptop- 20+ charges
Charging the Yeti 1250:
The Goal Zero Yeti 1250 can be charged by connecting a compatible solar panel such as the Boulder 30 panel kit (product # 110089)
The Goal Zero Yeti 1250 can be recharged from a regular wall outlet in about 18 hours. You can charge your Yeti with solar panels, and a wall charger at the same time
Although not the most ideal recharge time, the Goal Zero Yeti 1250 can also be charged by plugging into your car 12V adapter in about 44 hours.
Using the Yeti 1250 to Power Devices:
Three 2.1A USB Outlets. The USB port best charges all your large sized or multiple USB powered devices.
The 12V best charges all your 12V powered devices
Plug in your device just as you would the wall. There are three AC Outlets (pure-sine wave)
Charge Times: 18 hours (wall charger), 44 hours (car charger), 40-80 hours (2x Boulder 30), 27-54 hours (3x Boulder 30)
Cell Type: AGM Lead Acid
Peak Capacity: 1200Wh (12V, 100Ah
Lifecycles: hundreds of cycles
Shelf-life: Keep plugged in, or charge every 3 months
Fuses: 200A (4x 50A fuses in parallel)
Management System: MPPT charge controller, low battery protection
USB Port (output): 5V, up to 2.1A (10.5 W max), regulated
6mm Port (output, 6mm): 12V, up to 10A (120W max)
12V Car Port (output): 12V, up to 10A (120W max)
12V Power Pole Port (output): 12-14V, up to 30A (360W max)
AC Inverter (output, pure sine wave): 110V 10A (1200W continuous, 1500W surge max)
Charging Port (input, 8mm): 16-48V, up to 10A (160W max)
Power Pole Charging Port (input): 16-48V, up to 20A (240W max)
Power Pole Chaining Port: 12V, up to 175A (2100W max)
Weight: 103 lbs
Dimensions: 11" x 16" x 14.5"
Operating Usage Temp.: 32-104 F
Certifications: CE, FCC, ROHS